2mm x 5mm Rectangular LED CBI® Circuit Board Indicator 7.62 [.300] 5.46 [.215] 7.62 [.300] 5.08 [.200] PART NO. 566-0207 566-0307 566-0407 12.58 [.495] 2.41 [.095] 6.73 [.265] D 3.18 [.125] 4.32 [.170] CATHODE 2.54 [.100] .97 [.038] FIG. A A A 566-3507 Red/Green B ANODE 2.54 [.100] 2.54 [.100] RECOMMENDED PC BOARD HOLE PATTERN 1.52 [.060] 2.54 [.100] 7.62 [.300] Dimensions in mm [inches] FIGURE A Features 7.62 [.300] 5.46 [.215] 7.62 [.300] 5.08 [.200] COLOR Green Yellow Red BI-COLOR 3.18 [.125] 7.11 [.280] 2.54 [.100] 566-xx07 • Multiple CBIs form horizontal LED arrays on 10.16mm (0.400”) center-lines. • Available common cathode (3 leaded) multi-color option 12.58 [.495] 2.41 [.095] 6.73 [.265] D 1 2 3.18 [.125] 4.32 [.170] .126 [.050] simplifies circuit designs • High Contrast, UL 94 V-0 rated, black housing • Oxygen index: 32% 3 3.18 [.125] 7.11 [.280] 2.54 [.100] 2.54 2.54 [.100] [.100] • • • • CATHODE 1. GREEN ANODE 2. COMMON CATHODE 3. RED ANODE 2.54 [.100] .97 [.038] RECOMMENDED PC BOARD HOLE PATTERN 1.26 [.050] 2.54 [.100] 7.62 [.300] 2.54 [.100] Polymer content: PBT, 0.532 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 Tolerance note: As noted, otherwise: 1.52 [.060] • LED Protrusion: ±0.04 mm [±0.016] Dimensions in mm [inches] • CBI Housing: ±0.02mm[±0.008] FIGURE B Typical Operating Characteristics (TA=25°C) See LED data sheet for additional information See Page 5-20 and 5-21 for Reference Only LED Drive Circuit Example See Page 5-22 for Pin Out Part Number Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # 566-0207 566-0307 566-0407 566-3507 Green Yellow Red Red/Green 565 583 635 635/565 4 3.5 7.4 3.5*/4* 2.2 2.1 2 1.9/2.1 20 20 20 10 110° 110° 140° 100° 521-9332 521-9452 521-9499 521-9406 5-16 5-16 5-16 5-17 * IF = 20mA 5-8 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 2mm x 5mm Discrete LED Rectangular Tinted, Diffused 521-9332, PART NO. COLOR DRAWING 521-9332 521-9452 521-9499 521-9718 Green Yellow Red Blue A A B B 2.11 [.083] 7.70 [.303] 1.00 [.040] 4.82 [.190] 2.54 [.100] CATHODE .51 [.020] 25.4 [1.00] -9452, -9499, -9718 DRAWING A 2.00 [.079] DIM. L 1.00 [.040] 2.54 [.100] 5.00 [.197] CATHODE .51 [.020] 25.4 [1.00] DRAWING B Dimensions in mm [inches] DIM. L Red 7.50 [.295] Blue 7.00 [.275] Green Yellow Red Blue -9332 -9452 -9499 -9718 Power Dissipation (mW) 135 85 100 189 Forward Current (mA) Derating (mA/°C) From 50°C 1. mW/°C From 25°C 30 .5 20 .34 30 .4 30 .451 500* 500* 120 180 Operating Temperature (°C) -20/+100 -55/+100 -55/+100 -25/+75 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 -25/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Peak Current (mA) Pulse width = 1 ms *Pulse width = 10 µs Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Green Yellow Red Blue -9332 -9452 -9499 -9718 Luminous Intensity (mcd) IF=20mA Min. Typical 2.6 4 2.2 3.5 3 7.4 9 18 Peak Wavelength (nm) λ Peak Typical 565 583 635 430 Viewing Angle (2Θ ½) Typical 110° 110° 140° 120° Forward Voltage (V) IF=20mA Typical Max. 2.2 3 2.1 2.6 2 2.8 5.3 6 Reverse Voltage (V), IR=100µA Min. 5 5 5 5 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity 5-16 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 2mm x 5mm Discrete LED Bi-Color LED, Common Cathode Non-Tinted, Diffused .29 [.315] 521-9406 2.11 [.083] .196 [.215] GREEN ANODE .194 [.204] COMMON CATHODE 1.27 [.050] PART NO. COLOR 521-9406 Red/Green 2.54 [.100] RED ANODE 1.00 [.040] 25.4 [1.00] MIN LEADS .020 SQ. TYPICAL .508 [.020] Dimensions in mm [inches] Red/Green -9406 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) Derating (mW/°C) From 25°C 135/135 1.8/1.8 Forward Current (mA) 25/25 Peak Current (mA) Pulse width = 10 µs 90/90 Operating Temperature (°C) -20/+85 Storage Temperature (°C) -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C Red/Green -9406 OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=20mA Min. Typical 2.1/2.6 3.5/4 Peak Wavelength (nm) λ Peak Typical 635/565 Viewing Angle (2Θ ½) Typical 100° Forward Voltage (V) IF=10mA Typical Max. 1.9/2.1 2.4/2.7 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 5-17 5