SK52SMC ... SK510SMC SK52SMC ... SK510SMC Surface Mount Schottky Rectifiers Schottky-Gleichrichter für die Oberflächenmontage Version 2007-04-25 Nominal current – Nennstrom ±0.2 2.2±0.2 7.5 ~ SMC ~ DO-214AB Weight approx. – Gewicht ca. 3 Type Typ 20...100 V Plastic case Kunststoffgehäuse 0.15 5.8±0.2 1.2 5A Repetitive peak reverse voltage Periodische Spitzensperrspannung 2.1±0.1 7.9 0.21 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle ±0.2 Dimensions - Maße [mm] Maximum ratings Type Typ 1) Grenzwerte Repetitive peak reverse voltage Periodische Spitzensperrspannung VRRM [V] Surge peak reverse voltage Stoßspitzensperrspannung VRSM [V] Forward voltage Durchlass-Spannung VF [V] 2) SK52SMC 20 20 < 0.55 SK53SMC 30 30 < 0.55 SK54SMC 40 40 < 0.55 SK55SMC 50 50 < 0.68 SK56SMC 60 60 < 0.68 SK58SMC 80 80 < 0.83 SK510SMC 100 100 < 0.83 Max. average forward rectified current, R-load Dauergrenzstrom in Einwegschaltung mit R-Last TT = 100°C TT = 85°C IFAV IFAV 5 A 3) 5 A 4) Repetitive peak forward current Periodischer Spitzenstrom f > 15 Hz TT = 85°C IFRM 20 A Peak forward surge current, 50/60 Hz half sine-wave Stoßstrom für eine 50/60 Hz Sinus-Halbwelle TA = 25°C IFSM 100/110 A Rating for fusing, t < 10 ms Grenzlastintegral, t < 10 ms TA = 25°C i2t Operating junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj 1 2 3 4 TS 50 A2s -50...+150°C -50...+150°C Currently available: SK55SMC, SK56SMC – Momentan erhältlich: SK55SMC, SK56SMC IF = 5 A, Tj = 25°C SK52SMC ... SK56SMC SK58SMC, SK510SMC © Diotec Semiconductor AG http://www.diotec.com/ 1 SK52SMC ... SK510SMC Characteristics Kennwerte Leakage current Sperrstrom Tj = 25°C Tj = 100°C VR = VRRM VR = VRRM IR IR < 150 µA < 20 mA Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft RthA < 45 K/W 1) Thermal resistance junction to terminal Wärmewiderstand Sperrschicht − Anschluss RthT < 10 K/W 102 120 [%] [A] 100 SK52...54 10 80 SK55, SK56 1 60 40 SK58, SK5510 -1 10 20 IF IFAV 0 10-2 0 TT 50 100 150 [°C] Tj = 25°C 0 Rated forward current vs. temp. of the terminals Zul. Richtstrom in Abh. v. d. Temp. der Terminals 1 2 VF 0.4 0.6 [V] 1.0 Forward characteristics (typical values) Durchlasskennlinien (typische Werte) Mounted on P.C. board with 50 mm2 copper pads at each terminal Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lötpad) an jedem Anschluss http://www.diotec.com/ © Diotec Semiconductor AG