eKM6611 RF Mouse Tx Controller Product Specification DOC. VERSION 1.0 ELAN MICROELECTRONICS CORP. December 2002 Trademark Acknowledgments: IBM is a registered trademark and PS/2 is a trademark of IBM. Windows is a trademark of Microsoft Corporation. ELAN and ELAN logo are trademarks of ELAN Microelectronics Corporation. Copyright © 2005 by ELAN Microelectronics Corporation All Rights Reserved Printed in Taiwan The contents of this specification are subject to change without further notice. ELAN Microelectronics assumes no responsibility concerning the accuracy, adequacy, or completeness of this specification. ELAN Microelectronics makes no commitment to update, or to keep current the information and material contained in this specification. Such information and material may change to conform to each confirmed order. In no event shall ELAN Microelectronics be made responsible for any claims attributed to errors, omissions, or other inaccuracies in the information or material contained in this specification. ELAN Microelectronics shall not be liable for direct, indirect, special incidental, or consequential damages arising from the use of such information or material. The software (if any) described in this specification is furnished under a license or nondisclosure agreement, and may be used or copied only in accordance with the terms of such agreement. ELAN Microelectronics products are not intended for use in life support appliances, devices, or systems. Use of ELAN Microelectronics product in such applications is not supported and is prohibited. NO PART OF THIS SPECIFICATION MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN PERMISSION OF ELAN MICROELECTRONICS. ELAN MICROELECTRONICS CORPORATION Headquarters: Hong Kong: USA: No. 12, Innovation Road 1 Hsinchu Science Park Hsinchu, Taiwan 30077 Tel: +886 3 563-9977 Fax: +886 3 563-9966 http://www.emc.com.tw Elan (HK) Microelectronics Corporation, Ltd. Elan Information Technology Group Rm. 1005B, 10/F Empire Centre 68 Mody Road, Tsimshatsui Kowloon , HONG KONG Tel: +852 2723-3376 Fax: +852 2723-7780 [email protected] 1821 Saratoga Ave., Suite 250 Saratoga, CA 95070 USA Tel: +1 408 366-8223 Fax: +1 408 366-8220 Europe: Shenzhen: Shanghai: Elan Microelectronics Corp. (Europe) Elan Microelectronics Shenzhen, Ltd. Elan Microelectronics Shanghai Corporation, Ltd. Siewerdtstrasse 105 8050 Zurich, SWITZERLAND Tel: +41 43 299-4060 Fax: +41 43 299-4079 http://www.elan-europe.com SSMEC Bldg., 3F, Gaoxin S. Ave. Shenzhen Hi-Tech Industrial Park Shenzhen, Guandong, CHINA Tel: +86 755 2601-0565 Fax: +86 755 2601-0500 23/Bldg. #115 Lane 572, Bibo Road Zhangjiang Hi-Tech Park Shanghai, CHINA Tel: +86 021 5080-3866 Fax: +86 021 5080-4600 Contents Contents 1 2 3 4 5 6 7 General Descriptor.................................................................................................... 1 Feature ....................................................................................................................... 1 Application................................................................................................................. 1 Pin Assignment ......................................................................................................... 2 Pin Descriptor............................................................................................................ 2 Function Descriptor .................................................................................................. 3 6.1 Oscillator Frequency .......................................................................................... 3 6.2 Device ID............................................................................................................ 3 6.3 Z-axis Type ......................................................................................................... 3 6.4 Operation Mode.................................................................................................. 3 Application Circuit .................................................................................................... 4 7.1 eKM6611_A ........................................................................................................ 4 7.2 eKM6611_B ........................................................................................................ 5 Product Specification (V1.0) 12.10.2002 • iii Contents Specification Revision History iv • Doc. Version Revision Description Date 1.0 Preliminary version 2002/12/10 Product Specification (V1.0) 12.10.2002 eKM6611 RF Mouse Tx Controller 1 General Descriptor The eKM6611 is a transmitter (Tx) controller of RF mouse, which support the 3D, 5/3 buttons RF mouse. And it’s built-in the battery detect function. The eKM6611 is to match with RF Mouse Rx controller for eKM6211 series (PS/2) or eKM6251 (USB+PS2). 2 Feature Operating voltage range: 2.2V~5.5V Available in temperature range: 0℃~70℃ Operating frequency: 4.00Mhz Efficient encoding algorithm for RF data packets. Device ID Power-on is default ID. Using the push button to random generate the 255 sets ID. Support 2 different Z-axis type and mouse buttons Mechanical-device type , 5 buttons (eKM6611A) Photo-couple type, 3 buttons (eKM6611B) Support 3 Operation Mode to saving power. Operation mode Standby mode Sleep mode To match with RF Mouse Rx controller : eKM6211: PS/2 only eKM6251: USB and PS/2 Package type: 16 pins DIP and SOP (300mil) 3 Application 3D, 5 buttons RF mouse Tx with mechanical Z-axis. 3D, 3 buttons RF Mouse Tx with photo Z-axis. Product Specification (V1.0) 12.10.2002 (This specification is subject to change without further notice) •1 eKM6611 RF Mouse Tx Controller 4 Pin Assignment U4 1 2 3 4 5 6 7 8 9 Y1/Z1 X2/NEXT X1/PRE Y2/Z2 OSCI NC /RESET OSCO VDD VSS S2 L/ID0 S1 R/ID1 RFC M/ID2 TXD S3 18 17 16 15 14 13 12 11 10 eKM6611 5 2• Pin Descriptor Pin No. Symbol I/O Function 1 Y1 I Y1/Z1 input pin 2 Y2 I Y2/Z2 input pin 3 NC - N.C. 4 /RESET I Reset pin 5 VSS - Ground pin 6 L I L buttons 7 R I R buttons 8 M I M buttons 9 S3 I/O S3 control line, 10 TXD O RF data output 11 RFC O RF module control. High active 12 S1 I/O S1 control output 13 S2 I/O S2 control output 14 VDD - Voltage supply pin 15 OSCO O Output for crystal oscillator clock. 16 OSCI I External crystal input 17 X1 I X1 input, Pre button 18 X2 I X2 input, Next button Product Specification (V1.0) 12.10.2002 (This specification is subject to change without further notice) eKM6611 RF Mouse Tx Controller 6 Function Descriptor There are two types of eKM6611 series : eKM6611A and eKM6611B. The Table 1.1 summarizes the features of each type in eKM6611 series. No. Osc. Freq. Z axis type XY scan rate Buttons eKM6611A 4.00Mhz Mechanica 10.0KHz 5 eKM6611B 4.00Mhz Photo 6.6KHz 3 comment 2-diode z axis photo 6.1 Oscillator Frequency The external oscillator frequency is 4.00MHz, it’s have higher movement scan rate (up to 10KHz). 6.2 Device ID When eKM6611 is power-on, it initial to default ID (0xFF), first. eKM6611 is using the connect button to generate a random ID. After the button is pushed and released, the controller will generate a new ID (from 0x01 to 0xFF) and transmit the new ID to the receiver consecutively at least 10sec. Each power on time, the Device ID will set to 0xFF automatically. Only when the conflict occurs, user is needs to set ID manually. 6.3 Z-axis Type The wheel of 3D mouse, which we used to call it Z-axis, it’s detected by mechanical device or photo-couples. eKM6611_A, and eKM6611_B is support the latter. The noise immunity of photo-couples is better than the mechanical device. However, the photo-couples is more expensive. 6.4 Operation Mode The eKM6611 have three operation modes, that’s Operating Mode, Standby Mode and Sleep Mode. While the mouse is moving, the controller is working under the Operating Mode, sending the data to RF module for transmitting. If the mouse stops over 0.5 seconds, the eKM6611 will enter the Standby mode to reduce the consumption of power. Once the movement is detected or buttons are pushed, the controller will return to Operating mode. After working under the Standby Mode for an interval, it will enter Sleep Mode automatically. In Sleep Mode, the controller saves at least 95% consumption of power in Operating Mode. Product Specification (V1.0) 12.10.2002 (This specification is subject to change without further notice) •3 eKM6611 RF Mouse Tx Controller Test IC: eKM6611A Oscillator: 4.00Mhz Battery Voltage: 3.15V 7 with RF module without RF Module Operating Mode 10.2mA 6.7mA Standby Mode 1.2mA 1.2mA Sleep Mode 79µA 78µA Application Circuit 7.1 eKM6611_A VCC Y_LED D3 X_LED D2 D1 D14 1N4148 Q5 1 2 Q4 1 2 Q3 1 2 2 1N4148 Q2 1 C3 VCC VCC Q1 PNP 0.47uF Y_Axis X_Axis R1 R2 RESISTOR 5 4 3 2 C 1 RESISTOR Pre U1 SW7 1 2 D10 1N4148 Z_Axis SW1 L SW2 R SW3 M VCC D4 1N4148 D7 1N4148 Y1/Z1 Y2/Z2 1N4148 3 SW4 D9 S3 1 2 3 4 5 6 7 8 9 Y1/Z1 X2/NEXT Y2/Z2 X1/PRE NC OSCI /RESET OSCO VSS VDD L/ID0 S2 R/ID1 S1 M/ID2 RFC S3 TXD 18 17 16 15 14 13 12 11 10 X2 X1 SW5 D8 C2 1N4148 S2 S1 Q6 C1 4.00Mhz 20pF Next 20pF VCC RF Control RF Data eKM6611_E D11 SW6 CONNECT 1N4148 4• Product Specification (V1.0) 12.10.2002 (This specification is subject to change without further notice) eKM6611 RF Mouse Tx Controller 7.2 eKM6611_B R3 VCC RESISTOR Y_LED D3 Q5 1 2 X_LED D2 Q4 1 2 Q3 1 2 2 Z_LED D1 Q2 1 Q7 1 2 2 Q6 1 C3 VCC VCC VCC 0.47uF Y_Axis X_Axis Z_Axis R1 R2 RESISTOR 7 6 5 4 3 2 1 Q1 PNP U1 Q6 C1 4.00Mhz 20pF RESISTOR SIP 7 Y1 Y2 1 2 3 4 5 6 7 8 9 VCC SW1 L 1N4148 SW2 R Z1 Z2 1N4148 SW3 M S3 D4 D5 D6 Y1/Z1 X2/NEXT Y2/Z2 X1/PRE NC OSCI /RESET OSCO VSS VDD L/ID0 S2 R/ID1 S1 M/ID2 RFC S3 TXD 18 17 16 15 14 13 12 11 10 X2 X1 C2 S2 S1 20pF VCC RF Control RF Data 1N4148 eKM6611_EB D7 SW6 CONNECT 1N4148 Product Specification (V1.0) 12.10.2002 (This specification is subject to change without further notice) •5 eKM6611 RF Mouse Tx Controller 6• Product Specification (V1.0) 12.10.2002 (This specification is subject to change without further notice)