IW4049B Description The IW4049B is hex buffers and feature logic-level conversion using only one supply (voltage Vcc).The input- signal high (Vih) can exceed the Vcc supply voltage when these devices are used for logic -level conversions. These devices are intended for use as CMOS to DTL/TTL converters Features Operating Voltage Range: 3.0 to 18 V at 18 V over full packageMaximum input current of 1 utemperature range ;100 nA at 18 V and 25 C A Noise margin (over full package temperature range): 1.0 V min @ 5.0 V supply 2.0 V min @ 10.0 V supply 16 16 SOP - 16 DIP - 16 2.5 V min @ 15.0 V supply Package Logic Diagram Pin Assignment A1 A2 A3 A4 A5 A6 3 5 7 2 4 6 9 10 11 12 14 15 Y1 Y2 Y3 Vcc 1 16 NC Y1 2 15 Y6 A1 3 14 A1 Y2 4 13 NC A2 5 12 Y5 Y3 6 11 A5 A3 7 10 Y4 GND 8 9 A4 Y4 NC = NO CONNECTION Y5 Function Table Y6 Inputs Output A Y H L L H PINS 13, 16 = NO CONNECTION PIN 1 = V CC PIN 8 = GND BEIJING ESTEK ELECTRONICS CO.,LTD 1 IW4049B Absolute Maximum Ratings Symbol Parameter VCC DC Supply Voltage (Referenced to GND) V IN DC Input Voltage (Referenced to GND) VOUT DC Output Voltage (Referenced to GND) IIN DC Input Current, per Pin PD Power Dissipation in Still Air, Plastic PD SOIC Package Power Dissipation per Output Transistor Tstg TL DIP Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value Unit -0.5 to 20 V to +18 V -0.5 to VCC+0.5 V V +- 10 750 500 mW 100 mW -65 to 150 °C 260 °C mA Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. Derating - Plastic DIP: - 10 mW/ °C from 65°to 125 °C °C from 65°to 125 °C SOIC Package The IW4049B has high-to-low level voltage conversion capability but not low-to-high level,thefore it is recommended that Vin ≥ Vcc Recommended Operating Conditions Symbol Parameter Min Max Unit VCC DC Supply Voltage (Referenced to GND) 3.0 18 V VIN DC Input Voltage (Referenced to GND) VCC 18 V VOUT DC Output Voltage (Referenced to GND) 0 VCC V TA Operating Temperature, All Package Types -55 125 °C The IW4049B has high-to-low level voltage conversion capability but not low-to-high level,thefore it is recommended that ≥ Vcc Vin This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, V IN and V OUT should be constrained to the range GND (VIN or VOUT)ᆪ VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC Unused outputs must be left open. BEIJING ESTEK ELECTRONICS CO.,LTD 2 IW4049B DC Electrical Characteristics (Voltages Referenced to GND) VCC Symbol Parameter Test Conditions Guaranteed Limit V -55°C 25°C 125 °C Unit VIH Minimum High-Level Input Voltage VOUT=0.5 V VOUT=1.0 V VOUT=1.5 V 5.0 10 15 4 8 12.5 4 8 12.5 4 8 12.5 V VIL Maximum Low Level Input Voltage VOUT=0.5 V VOUT=1.0 V VOUT=1.5 V 5.0 10 15 1 2 2.5 1 2 2.5 1 2 2.5 V VOH Minimum High-Level VIN=GND Output Voltage 5.0 10 15 4.95 9.95 14.95 4.95 9.95 14.95 4.95 9.95 14.95 V VOL Maximum Low-Level Output Voltage VIN=V CC 5.0 10 15 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 V IIN Maximum Input Leakage Current VIN= GND or VCC 18 +- 0.1 +- 0.1 +- 1.0 uA VIN= GND or VCC 5.0 10 15 20 1.0 2.0 4.0 20 1.0 2.0 4.0 20 30 60 120 600 uA VOL=0.4 V VOL=0.5 V VOL=1.5 V 4.5 5.0 10 15 3.3 4 10 26 2.6 3.2 8 24 1.8 2.4 5.6 18 VIN= GND or VCC VOH=2.5 V VOH=4.6 V VOH=9.5 V VOH=13.5 V 5.0 5.0 10 15 -2.6 1.55 –0.81 0.48 –2.0 –5.2 -2.1 -0.65 -1.65 -4.3 -1.18 -3.1 ICC Maximum Quiescent Supply Current (per Package) IOL IOH Minimum Output Low (Sink) Current Minimum Output High (Source) Current VIN= GND or VCC VOL=0.4 V mA BEIJING ESTEK ELECTRONICS CO.,LTD 3 IW4049B AC Electrical Characteristics Symbol tPLH tPHL tTLH tTHL CIN (CL=50pF, RL=200 k ns) V V V V 5 10 10 15 15 5 10 5 15 5 120 65 90 50 90 5 10 10 15 15 5 10 5 15 5 65 40 Maximum Output Transition Time, Any Output (Figure 1) 5 10 15 5 10 15 20 Maximum Output Transition Time, Any Output (Figure 1) 5 10 15 5 10 15 - - Parameter Maximum Propagation Delay, Input A to Output Y (Figure 1) Maximum Propagation Delay, Input A to Output Y (Figure 1) Maximum Input Capacitance 120 65 90 50 90 65 40 30 30 20 30 30 160 80 60 160 80 60 60 40 30 60 22.5 240 130 180 100 180 130 80 60 60 40 320 160 120 120 80 60 Unit ns ns ns ns pF Vcc GND tPHL OUTPUT Y Guaranteed Limit ≥-55°C 25°C ≤125°C 90% 50% 10% INPUT A , Input t r =t f =20 tPLH Vcc 90% 50% 10% GND Figure 1. Switching Waveforms BEIJING ESTEK ELECTRONICS CO.,LTD 4 IW4049B Expanded Logic Diagram (1/6 of the Device) A Address : Y 6A06--6A07 Rm 6A07,Changyin Office Building ,No.88,Yong Ding Road,Hai Dian District ,Beijing Postalcode:100039 Tel: 86-010-58895780 / 81 / 82 / 83 / 84 Fax : 010-58895793 Http://www.estek.com.cn Email:[email protected] REV No:01-060836 BEIJING ESTEK ELECTRONICS CO.,LTD 5