EUDYNA FLD3F10NP-A

1,310nm Modulator
Integrated DFB Laser
FLD3F10NP-A
FEATURES
• Modulator Integrated DFB Laser Diode Module
• CW operation of DFB laser section
• Modulation voltage applied only to modulator section
• High speed butterfly package with GPO connection
• Built-in optical isolator, monitor photodiode, thermistor, and
thermo-electric cooler
APPLICATION
This MI laser is intended for intermediate reach applications
(≤24km) at 10Gb/s.
DESCRIPTION
The Modulator Integrated DFB Laser (MI DFB Laser) has an electro-absorption modulator
monolithically integrated with a conventional Distributed Feed-Back (DFB) laser. The modulation
voltage is applied to the modulator section while the laser section operates CW allowing extremely
low wavelength chirping. Extinction ratios of more than 8.2 dB can be achieved with 2.6 Vp-p
modulation. The MI laser is installed in a butterfly type package. The module incorporates a highly
stable optical coupling system. The module includes an optical isolator, monitor photodiode,
thermistor and a thermoelectric cooler.
ABSOLUTE MAXIMUM RATINGS (Top=25°C, unless otherwise specified)
Rating
Parameter
Symbol
Condition
Operating Case Temperature
Top
Storage Temperature
Tstg
Optical Output Power
Unit
Min.
Max.
-
0
+70
-
-40
+85
°C
°C
Pf
CW
-
5
mW
Laser Forward Current
IF
CW
-
150
mA
Laser Reverse Voltage
VR
CW
-
2
V
Modulator Forward Voltage
Vm
CW
-5
+1
V
Photodiode Forward Current
-
-
-
1
mA
Photodiode Reverse Voltage
VDR
V
-
-
10
Cooling
Heating
Cooling
Heating
-2.0
-0.7
+2.5
+1.4
-
Tth
ATC Operation
0
+70
°C
-
260°C
-
10
sec
TEC Voltage
Vc
TEC Current
Ic
Thermistor Temperature
Lead Soldering Time
Edition 1.3
July 2004
1
V
A
1,310nm Modulator
Integrated DFB Laser
FLD3F10NP-A
OPTICAL & ELECTRICAL CHARACTERISTICS (TL= Tset, Tc = 25°C, BOL, unless otherwise specified)
Parameter
Limits
Type
Symbol
Test Condition
Min.
Peak Wavelength
λp
Note (2)
1290
-
1320
nm
Threshold Current
Ith
CW, Vm=Vo
-
-
35
mA
Threshold Power
Pth
CW, IF=Ith, Vm=Vo
-
-
75
µW
Operating Current
Iop
CW, Vm=Vo
50
-
100
mA
Forward Voltage
VF
CW, IF=Iop, Vm=Vo
-
-
2.2
V
Optical Output Power
(Avg. Power)
Pf
Note (1)
0.0
-
2.0
dBm
Dispersion Penalty
dP
Note (1)
-
-
1.0
dB
SSR
Note (2)
30
-
-
dB
Optical Isolation
Is
Tc=0 to +70°C
23
35
-
dB
On Level Modulation
Vo
-
-1.0
-
0
V
Vmod
(Vo-Vmod)≥-3.3V
-
-
2.6
Vpp
Rext
f=10Gb/s, IF=Iop,
Vm=Vo/(Vo-Vmod)
8.2
-
-
dB
Rise Time
Tr
Note (2), 20 to 80%
-
-
25
ps
Fall Time
Tf
Note (2), 20 to 80%
-
-
25
ps
10
-
-
GHz
8
-
-
dB
Sidemode Suppression Ratio
Modulator Drive Voltage
Extinction Ratio
-3dB bandwidth,
Vm=-1V, IF=Iop
f=DC-5GHz, 50Ω Test Set,
Vm=-1V, IF=Iop
Max.
Unit
Cut-off Frequency
S21
RF Return Loss
S11
RF Return Loss
S11
f=5-10GHz, 50Ω Test Set,
Vm=-1V, IF=Iop
5
-
-
dB
Monitor Current
Im
VDR=5V, Note (2)
0.2
-
2.0
mA
TEC Capacity
∆T
PTEC=2.4W, IF=Iop
45
-
-
°C
TEC Current
Ic
IF=Iop, ∆T=45°C
-
-
1.2
A
TEC Voltage
Vc
IF=Iop, ∆T=45°C
-
-
2.4
V
TEC Power Dissipation
Pc
IF=Iop
-
-
2.9
W
Thermal Resistance
Rth
TL=25°C
9.5
-
10.5
kΩ
3,270
3,450
3,630
K
Thermistor B Constant
B
Note (1) Eudyna Test System
23
9.95328Gb/s, PRBS=2 -1, IF=Iop, Vm=Vo and (Vo-Vmod)
Dispersion=82ps/nm, Dispersion penalty at
Bit Error Rate = 1.0E-10
Note (2) Eudyna Test System 23
9.95328Gb/s, PRBS=2 -1, IF=Iop, Vm=Vo and (Vo-Vmod)
2
1,310nm Modulator
Integrated DFB Laser
FLD3F10NP-A
Fig. 2 Output Pwer & Monitor Current
vs. Forward Current
10 Gb/s
PRBS=223-1
IF=Iop
Vm=Vo/(Vo-2)
4
2.0
Vo=-0.3V
TLD=+25°C
3
1.5
Im
2
1.0
Pf
0.5
1
0
0
20
40
60
80
0
100
Forward Current, IF (mA)
Wavelength (Span=1 nm/div, Res.=0.1nm)
Fig. 3 Extinction Ratio
vs. Modulation Voltage
Minus Extinction Ratio (dB)
0
-5
-10
-15
-20
-25
0
0.5
1.0
1.5
2.0
2.5
Modulation Voltage (V)
Fig. 5 RF Return Loss (S11)
12
9
6
3
Return Loss (dB)
Relative Output (dB)
Fig. 4 Cut-off Frequency (S21)
0
-3
-6
-9
-12
0
5
10
15
40
30
20
10
0
-10
-20
-30
-40
0
20
5
10
15
Frequency (GHz)
Frequency (GHz)
3
20
Monitor Current (mA)
Output Power, Pf (mW)
Relative Intensity (10 dB/div.)
Fig. 1 Lasing Spectrum
1,310nm Modulator
Integrated DFB Laser
FLD3F10NP-A
“NP” PACKAGE
UNIT: mm
17.24±0.25
15.24±0.25
7-0.5
2.54±0.20
PIN 7
8.17±0.25
5.41±0.25
TOP VIEW
7
4.83±0.20
1.25
7-0.15±0.05
ø0.9±0.1
8.89±0.15
12.7±0.25
8.25±0.20
ø5.2±0.25
PIN 1
6
5
4
3
TEC
2
1
TH
10KΩ
50Ω
4-ø2.67±0.2
ø4.16
5.08±0.25
8
10.0±0.25
20.83±0.25
22.00±0.25
26.04±0.25
29.97±0.25
*L
25.0±0.5
#
PIN DESIGNATIONS
1
2
3
4
5
6
7
8
Thermistor
Thermistor
LD Anode
Power Monitor Anode
Power Monitor Cathode
Thermoelectirc Cooler (+)
Thermoelectric Cooler (-)
Modulator Anode (-)
Case Ground: LD Cathode
0.5±0.2
PIN 8
5.47±0.2
* Pigtail length (L) and connector type are
specified in the detail (individual) specification.
CONNECTOR
For further information please contact:
CAUTION
Eudyna Devices USA Inc.
Eudyna Devices Inc. products contain gallium arsenide
(GaAs) which can be hazardous to the human body and the environment.
For safety, observe the following procedures:
2355 Zanker Rd.
San Jose, CA 95131-1138, U.S.A.
TEL: (408) 232-9500
FAX: (408) 428-9111
www.us.eudyna.com
• Do not put this product into the mouth.
Eudyna Devices Europe Ltd.
• Do not alter the form of this product into a gas, powder, or liquid
through burning, crushing, or chemical processing as these by-products
are dangerous to the human body if inhaled, ingested, or swallowed.
Network House
Norreys Drive
Maidenhead, Berkshire SL6 4FJ
United Kingdom
TEL: +44 (0) 1628 504800
FAX: +44 (0) 1628 504888
Eudyna Devices Asia Pte Ltd.
Hong Kong Branch
Rm. 1101, Ocean Centre, 5 Canton Rd.
Tsim Sha Tsui, Kowloon, Hong Kong
TEL: +852-2377-0227
FAX: +852-2377-3921
• Observe government laws and company regulations when discarding this
product. This product must be discarded in accordance with methods
specified by applicable hazardous waste procedures.
Eudyna Devices Inc. reserves the right to change products and specifications
without notice. The information does not convey any license under rights of
Eudyna Devices Inc. or others.
© 2004 Eudyna Devices USA Inc.
Printed in U.S.A.
Eudyna Devices Inc.
Sales Division
1, Kanai-cho, Sakae-ku
Yokohama, 244-0845, Japan
TEL: +81-45-853-8156
FAX: +81-45-853-8170
4