EVERLIGHT ELECTRONICS CO., LTD. DATA SHEET Part No. ：61-23/S3SGHBHC-B14/ET Date ：2007.6.27 Department：RD3 Revision ：1.2 Received □ MASS PRODUCTION ■ PRELIMINARY □ CUSTOMER DESIGN PAGE : 14 Revised record REV. DESCRIPTION RELEASE DATE 1.2 修正波長和VF分bin. 2007.6.27 OFFICE:.NO.25,LANE76,SEC.3,CHUNG YANG RD.,TUCHENG 236,TAIPEI,TAIWAN,R.O.C TEL : 886-2-22672000 FAX : 886-2-22676244 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Features ․Super-luminosity chip LED. ․White SMT package. ․Built in Red, Green, and Blue chips. ․Lead frame package with individual 6 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․Due to the package design, 61-23 has wide viewing angle , low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications ․Amusement equipment. ․Information boards. ․Flashlight for digital camera of cellular phone. Device Selection Guide Chip Emitted Color Type Material S3 AlGaInP Reddish Orange GH InGaN Brilliant Green BH InGaN Blue Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 1 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Package Outline Dimensions 3 2 1 4 5 6 Notes: 1.All dimensions are in millimeters. 3 2 1 4 5 6 2.Tolerances unspecified are ±0.1mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 2 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Peak Forward Current(Duty 1/10 @ 1KHZ) Power Dissipation Electrostatic Discharge(HBM) IF IFP Pd ESD S3S 50 GH 25 BH 25 S3S 100 GH 100 BH 100 S3S 120 GH 110 BH 110 S3S 2000 GH 150 BH 150 mA mA mA V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 3 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Typ. Max. S3S 112 ----- 450 GH 285 ----- 1120 BH 112 ----- 450 ----- 120 ----- S3S ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- S3S 613.5 ----- 621.5 GH 520 ----- 530 BH 465 ----- 470 S3S ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- S3S 1.8 ---- 2.4 GH 2.8 ---- 3.7 BH 3.2 ---- 3.6 S3S ----- ----- 10 GH ----- ----- 50 BH ----- ----- 50 2θ1/2 Viewing Angle Peak Wavelength Min. λp λd △λ VF IR Unit Condition IF=20mA mcd IF=20mA IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA μA VR=5V Notes: 1. Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1nm 3. Tolerance of Forward Voltage ±0.1 V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 4 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Bin Range of Luminous Intensity Symbol Bin Code Min. Max. R 112 180 S 180 285 T 285 450 T 285 450 U 450 715 V 715 1120 R 112 180 S 180 285 T 285 450 Bin Code Min. Max. E3 613.5 617.5 E4 617.5 621.5 X 520 525 Y 525 530 X 465 470 S3S Iv GH BH Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Bin Range of Dominant Wavelength Symbol S3S λd GH BH Notes: 1. Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 5 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Bin Range of Forward Voltage Symbol S3S VF GH BH Bin Code Min. Max. 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 10 2.70 2.90 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 10 2.70 2.90 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 Unit Condition V IF =20mA Notes: 1. Tolerance of Forward Voltage ±0.1 V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 6 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Typical Electro-Optical Characteristics Curves (S3S) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 7 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Typical Electro-Optical Characteristics Curves (GH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 8 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Typical Electro-Optical Characteristics Curves (BH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 9 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 10 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Loaded quantity per reel 800 PCS/reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 11 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering Test Condition Test Hours/Cycles Sample Size Ac/Re Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 * For each die Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 12 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 13 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-23 /S3SGHBHC-B14/ET 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 14 of 14 Device No.: Prepared date: 27-Jun-2007 Prepared by: Josh Chou