EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Full Color Top View LEDs 67-23/R7SGHBHC-B14/2T Features ․P-LCC-4 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-23 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Type R7S Material AlGaInP Emitted Color Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Water Clear Rev.3 Page: 1 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Package Outline Dimensions CL 1 4 2.8±0.2 CL 2 0.7±0.1 2.2±0.1 3 1 2 4 3 3.5±0.2 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.4±0.1 0.5±0.1 3.2±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.6 1.8 0.7 2.2 1.8 Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 2 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Peak Forward Current (Duty 1/10 @ 1KHZ) Power Dissipation Electrostatic Discharge(HBM) IF IFP Pd ESD R7S 50 GH 25 BH 25 R7S 100 GH 100 BH 100 R7S 120 GH 110 BH 110 R7S 2000 GH 150 BH 150 mA mA mW V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 3 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity IV Peak Wavelength λp Dominant Wavelength Spectrum Radiation Bandwidth λd △λ Forward Voltage Viewing Angle Reverse Current VF Min. Typ. Max R7S 140 ----- 285 GH 360 ----- 715 BH 90 ----- 180 R7S ----- 639 ----- GH ----- 518 ----- BH ----- 468 ----- R7S 621.5 ----- 633.5 GH 520.0 ----- 530.0 BH 465.0 ----- 475.0 R7S ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- R7S 1.75 ----- 2.35 GH 2.75 ----- 3.95 BH 2.75 ----- 3.95 ----- 120 ------------- ------------- 2θ1/2 IR R7S GH BH Unit Condition mcd *IF=20mA nm *IF=20mA nm *IF=20mA nm *IF=20mA V *IF=20mA ----- deg IF=20mA 10 50 50 μA VR=5V *For each die Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 4 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Bin Range Of Dominant Wavelength Symbol Bin Code Min. Max. E5 621.5 625.5 E6 625.5 629.5 E7 629.5 633.5 X 465 470 Y 470 475 X 520 525 Y 525 530 R7S λd BH GH Unit Condition nm IF =20mA Unit Condition mcd IF=20mA Bin Range Of Luminous Intensity Chip Bin Min Max R2 140 180 S1 180 225 S2 225 285 T2 360 450 U1 450 565 U2 565 715 Q2 90 112 R1 112 140 R2 140 180 R7S GH BH Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 5 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Typical Electro-Optical Characteristics Curves (R7S) Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 6 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Typical Electro-Optical Characteristics Curves (GH) Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 7 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Typical Electro-Optical Characteristics Curves (BH) Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 8 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 9 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Desiccant Rev.3 Label Page: 10 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Thermal Shock High Temperature Storage Low Temperature Storage Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 11 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No :DSE-673-056 http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 12 of 13 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-23/R7SGHBHC-B14/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No :DSE-673-056 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date:11-Fab-2007 Rev.3 Page: 13 of 13 Prepared by: Teresa Lee