EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Features ․Pb-free. ․Inner reflector. ․White package. ․Optical indicator. ․P-LCC-2 package. ․Wide viewing angle. ․Colorless clear resin. ․Precondition：According to JEDEC Level-2. ․ESD：Up to 2KV. (According to JESD22-A114-B) ․The product itself will remain within RoHS compliant version. ․Soldering methods：IR reflow and wave soldering. Descriptions ․The 67-21 series is available for orange, green, blue and yellow or other color due to the different raw material. ․Base on the package design, the device result in wide view angle. Applications ․Automotive backlighting or indicator：Dashboard, switch, audio and video equipments…etc. ․Backlight：LCD, switches, symbol, mobile phone and illuminated advertising. ․Display for indoor and outdoor application. ․Ideal for coupling into light guides. ․Substitution of traditional light. ․Optical indicator. ․General applications. Device Selection Guide Chip Emitted Color Resin Color Dark Red Water Clear Material AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Package Dimension Note：Tolerances unless dimension ±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 12 V Forward Current IF 30 mA Peak Forward Current ( t≦10μs，D = 0.1) IFP 1 A Power Dissipation Pd 120 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +110 ℃ Rth J-A 400 K/W Rth J-S 180 K/W Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Thermal resistance Soldering Temperature Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 180 ----- 560 mcd IF=30mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=30mA Peak Wavelength λp ----- 633 ----- nm IF=30mA Dominant Wavelength λd 624 ----- 636 nm IF=30mA Spectrum Radiation Bandwidth Δλ ----- 20 ----- nm IF=30mA Forward Voltage VF 1.75 2.0 2.35 V IF=30mA Reverse Current IR ----- 0.2 10 μA VR=12V Temperature coefficient of λp TCλp ----- 0.11 ----- nm/K IF=30mA Temperature coefficient of λd TCλd ----- 0.04 ----- nm/K IF=30mA Temperature coefficient of VF TCV ----- -1.7 ----- mV/K IF=30mA Notes： 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm 3. Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Bin Range of Luminous Intensity Bin Code Min. Max. S1 180 224 S2 224 280 T1 280 355 T2 355 450 U1 450 560 Unit Condition mcd IF=30mA Unit Condition nm IF=30mA Notes：Tolerance of Luminous Intensity：±11% Bin Range of Dominant Wavelength Bin Code Min. Max. 1 624 627 2 627 630 3 630 633 4 633 636 Notes：Tolerance of Dominant Wavelength：±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Typical Electro-Optical Characteristics Curves(Ta=25℃) Typical Curve of Spectral Distribution: 100 Relative Intensity (%) V(λ) RAC 50 0 400 450 500 550 600 650 700 Wp (nm) Note：V(λ)=Standard eye response curve；IF=30mA Diagram Characteristics of Radiation 20 o 10 o 0 o 1.0 o 30 40 o 0.8 o 50 View Angle 60 70 80 90 0.6 o 0.4 o 0.2 o o 0 1.0 0.8 0.6 0.4 0.2 0 o 20 Relative Intensity 40 o 60 o 80 o View Angle Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Forward Current vs. Forward Voltage (Ta=25℃) Forward Current IF (mA) 100 10 1 0.1 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 For war d Voltage V F ( V) Forward Current vs. Ambient Temperature Forward Current IF(mA) 40 30 20 10 0 0 20 40 60 80 100 120 Ambient Temperature Ta (℃) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Relative Luminous Intens ity Relative Luminous Intensity vs. Junction Temperature 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -20 0 20 40 60 80 100 120 100 120 Junction Temperature Tj(℃) Note：f(Tj) = Iv / Iv(25℃)；IF=30mA Relative Forward Voltage vs. Junction Temperature Relative Forward Voltage 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -20 0 20 40 60 80 Junction Temperature Tj(℃) Note：△VF = VF - VF (25 ℃) = f(Tj)；IF=30mA Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Label Explanation ․CPN：Customer’s Product Number ․P/N：Product Number ․QTY：Packing Quantity ․CAT：Luminous Intensity Rank ․HUE：Dom. Wavelength Rank ․REF：Forward Voltage Rank ․LOT No：Lot Number Reel Dimensions 2.2 0.5 178.0 1.0 60.0 1.0 9.0 1.0 12.0 1.0 13.0 0.5 Note：Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Carrier Tape Dimensions: Loaded Quantity 2000 PCS Per Reel Progressive direction 1.5+0.1 Polarity 0.23 1.75 3.5±0.05 4.0 8.0±0.3 4.0±0.1 1.75 2.0±0.05 3.23 2.24 Note：Tolerances unless dimension ±0.1mm. Unit = mm Moisture Resistant Packaging Process and Materials Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM Precautions for Use 1. Soldering Condition 1.1 (A) Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. (B) Recommend soldering pad Note：Tolerances unless dimension ±0.1mm. Unit = mm 1.2 Reflow soldering should not be done more than two times. 1.3 When soldering, do not put stress on the LED during heating. 1.4 After soldering, do not warp the circuit board. 2. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 3. Storage 3.1 Do not open moisture proof bag before the products are ready to use. 3.2 Before opening the package: The LED should be kept at 30℃ or less and 90%RH or less. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21RAC/B102/TR8/AM 3.3 After opening the package: The LED floor life is 1 year under 30℃ or less and 60% RH or less. If unused LED remain, it should be stored in moisture proof packages. 3.4 If the moisture absorbent material (silica gel) has faded away or the LED have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 12 Device No.: DSE-671-527 Prepared date: 03-May-2007 Prepared by: Jonny