EVERLIGHT 67-21B-GBC-YX2Z1M-BT-MS

EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
TOP View LEDs With Lens
67-21B/GBC-YX2Z1M/BT/MS
Features
․P-LCC-2 package.
․High flux output.
․High current capability.
․White package.
․Optical indicator.
․Colorless clear window.
․Ideal for backlight and light pipe application.
․Inter reflector.
․Suitable for automatic placement equipment.
․Suitable for reflow and wave solder processes.
․Available on tape and reel (12mm Tape).
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 67-21B series is available in soft orange,
green, blue and yellow. Due to the package design,
the LED has wide viewing angle and optimized
light coupling by inter reflector. This feature
makes the ideal for light pipe application.
The low current requirement makes this device
ideal for portable equipment or any other
application where power is at a premium.
Applications
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Lens Color
Material
Emitted Color
InGaN
Brilliant Green
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Water Clear
Rev. 1
Page: 1 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Package Dimensions
CL
2.2±0.1
2.8±0.2
CL
-
+
3.25±0.2
Polarity
3.0
For reflow soldering (propose)
Notes: Tolerances Unless Dimension ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 2 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
IFP
100
mA
Power Dissipation
Pd
110
mW
Electrostatic Discharge(HBM)
ESD
150
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
Peak Forward Current
(Duty 1/10 @1KHz)
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electronic Optical Characteristics (Ta=25℃) :
Parameter
Symbol
Luminous Intensity
Iv
Viewing Angle
Typ.
Max.
Unit
Condition
2250
-----
5600
mcd
IF=20mA
2θ1/2
-----
60
-----
deg
IF=20mA
Peak Wavelength
λp
-----
518
-----
nm
IF=20mA
Dominant Wavelength
λd
520
-----
535
nm
IF=20mA
Spectrum Radiation
Min.
IF=20mA
△λ
-----
35
-----
nm
Forward Voltage
VF
2.75
-----
3.95
V
IF=20mA
Reverse Current
IR
-----
-----
50
μA
VR=5V
Bandwidth
Notes:
1.Tolerance of Dominant Wavelength: ±1nm
2.Tolerance of Luminous Intensity: ±11%
3.Tolerance of Forward Voltage: ±0.05V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 3 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Bin Range of Dom. Wavelength
Groups
Y
Bin Code
Min
Max
X
520
525
Y
525
530
Z
530
535
Unit
Condition
nm
IF=20mA
Bin Range of Luminous Intensity
Bin Code
Min.
Max.
X2
2250
2850
Y1
2850
3600
Y2
3600
4500
Z1
4500
5600
Unit
Conduction
mcd
IF=20mA
Bin Range of Forward Voltage
Groups
M
Bin
Min
Max
5
2.75
3.05
6
3.05
3.35
7
3.35
3.65
8
3.65
Notes:
1.Tolerance of Dominant Wavelength: ±1nm
2.Tolerance of Luminous Intensity: ±11%
3.Tolerance of Forward Voltage: ±0.05V
Unit
Condition
V
IF=20mA
3.95
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 4 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 5 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 6 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Carrier Tape Dimensions: Loaded quantity 500 PCS per reel.
+
Polarity
Note: The tolerances unless mentioned is ±0.1mm Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Desiccant
Rev. 1
Label
Page: 7 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
Hours/Cycles
Size
No.
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
2
3
4
5
High Temperature
Storage
Low Temperature
Storage
Ac/Re
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 8 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1
Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260°C. Max.
10 Sec. Max.
1~5 °C / Sec.
Pre-heating
180~200°C
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals,
and do soldering of each terminal. Be careful because the damage of the product is often started at
the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 9 of 10
Prepared by:Ray Yuan
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/GBC-YX2Z1M/BT/MS
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-67B-050
prepared date:30-Jan-2007
Rev. 1
Page: 10 of 10
Prepared by:Ray Yuan