EVERLIGHT 67-01UTC-EV1W1N-2T

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet(Preliminary)
TOP View LEDs With Black Surface
67-01/UTC-EV1W1N/2T
Features
˙Fluorescence Type
˙High Luminous Intensity
˙High Efficiency
˙Emission Color:x=0.29,y=0.30
˙Pb-free.
˙The product itself will remain within RoHS compliant version.
Descriptions
˙The 67-01 series is available in soft orange,
green,blue and yellow. Due to the package design,
the LED has wide viewing angle and optimized
light coupling by inter reflector. This feature
makes the ideal for light pipe application. The low
current requirement makes this device ideal for
portable equipment or any other application where
power is at a premium.
Applications
˙OA Equipment
˙Backlighting of Full Color LCD
˙Automotive Equipment
˙Replacement of Conventional Light
Bulbs and Fluorescent Lamps
Device Selection Guide
Chip
Lens Color
Material
Emitted Color
InGaN
Pure White
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 1 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 2 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40~ +100
℃
Electrostatic Discharge(HBM)
ESD
2000
V
Power Dissipation
Pd
110
mW
Peak Forward Current(Duty
1/10 @ 1KHZ)
IFP
100
mA
Reflow Soldering : 260 ℃ for 10 sec.
Soldering Temperature
Tsol
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
IV
715
-----
1420
mcd
IF=20mA
Viewing Angle
2θ1/2
-----
120
-----
deg
IF=20mA
Forward Voltage
VF
2.70
-----
3.70
V
IF=20mA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 3 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Bin Range Of Luminous Intensity
Bin
V1
V2
W1
Min
715
900
1120
Max
900
1120
1420
Unit
Condition
mcd
IF=20mA
Unit
Condition
V
IF=20mA
Bin Range Of Forward Voltage
Group
N
Bin
10
11
12
13
14
Min
2.70
2.90
3.10
3.30
3.50
Max
2.90
3.10
3.30
3.50
3.70
Notes:
1.Tolerance of Luminous Intensity ±10%
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 4 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Group Bin Code
A0
E
CIE_x
0.280
CIE_y
0.248
0.264
0.267
0.283
0.305
0.296
Bin Code
CIE_x
0.311
CIE_y
0.294
0.307
0.315
0.330
0.339
0.276
0.330
0.318
0.287
0.295
0.307
0.315
0.283
0.305
0.304
0.33
0.304
0.330
0.33
0.36
0.307
0.315
0.33
0.339
0.296
0.276
0.287
0.295
0.307
0.315
0.311
0.294
B3
B6
B4
B5
*The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 5 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
CIE Chromaticity Diagram
0.36
0.35
0.34
B4
0.33
0.32
B3
y
0.31
0.30
B6
B5
0.29
0.28
0.27
A0
0.26
0.25
0.24
0.26
0.28
0.30
0.32
x
.
*The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 6 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 7 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 8 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Note: The tolerances unless mentioned is ±0.1mm Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Desiccant
Label
Rev. 1
Page: 9 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
1
Reflow Soldering
2
Temperature Cycle
3
4
5
Thermal Shock
High Temperature
Storage
Low Temperature
Storage
Test Condition
Temp. : 260℃±5℃
5sec.
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
Test
Sample
Ac/Re
Hours/Cycles Size
6 min
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA / 25℃
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 10 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 11 of 12
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-01/UTC-EV1W1N/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. :
prepared date:11-Apr-2006
Rev. 1
Page: 12 of 12
Prepared by: Teresa Lee