EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View White LEDs (0.8mm) 99-113UTC/710/TR8 Features ․Side view white LED. ․White SMT package. ․Lead frame package with individual 2 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Feature of the device: more light due to higher optical efficiency; extremely wide viewing angle; ideal for backlighting and coupling in light guide. ․ESD protection. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․Due to the package design, 99-113 has wide viewing angle , low power consumption and white LEDs are devices which are materialized by combing Blue LEDs and special phosphors . This feature makes the LED ideal for light guide application. Applications ․LCD Back Light. ․Mobile phones . ․Indicators. ․Illuminations. ․Switch Lights. Device Selection Guide Chip Lens Color Material Emitted Color InGaN White Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 1 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Package Outline Dimensions Notes: Tolerances Unless Dimension ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 2 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge*1 ESD 2000 V Power Dissipation Pd 110 mW IFP 100 mA Peak Forward Current (Duty 1/10 @10ms) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Note:1. The products are sensitive to static electricity and care must be fully taken when handling products. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Rank Min. Typ. Max. Unit Condition Viewing Angle 2θ1/2 ----- ----- 110 deg Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 ----- Rev. 1 IF=20mA Page: 3 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Bin Range Of Luminous Intensity Group Bin Code Min. Max. 5 1 2 3 4 5 6 500 600 630 660 690 720 600 630 660 690 720 750 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 750 780 810 840 870 900 930 960 990 1020 1050 1080 1110 1140 1170 1200 780 810 840 870 900 930 960 990 1020 1050 1080 1110 1140 1170 1200 1230 6 7 Unit Conduction mcd IF=20mA Notes: 1.Tolerance of Luminous Intensity ±10% Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 4 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Bin Range Of Forward Voltage Group Bin Code Min. Max. Unit 0 6-1 6-2 7-1 7-2 8-1 8-2 9-1 9-2 2.95 3.05 3.15 3.25 3.35 3.45 3.55 3.65 3.05 3.15 3.25 3.35 3.45 3.55 3.65 3.75 V Conduction IF=20mA Notes: 1.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 5 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Chromaticity Coordinates Specifications for Bin Grading Bin Bin Group CIE_x CIE_y CIE_x Code Code 0.2915 0.2870 0.2970 0.3003 0.3003 0.2970 0.3070 0.3090 0.2818 0.2755 0.2870 0.2915 0.2879 0.2818 0.2915 0.2960 B5-1 1 B5-2 2 A0-2 A0-4 Group Bin Code A0-1 3 A0-3 0.2855 0.2950 0.3050 0.2950 0.2950 0.3050 0.3150 0.3045 0.2715 0.2810 0.2950 0.2855 0.2619 0.2715 0.2855 0.2760 CIE_x CIE_y 0.2720 0.2640 0.2755 0.2818 0.2800 0.2720 0.2818 0.2879 0.2575 0.2670 0.2810 0.2715 0.2480 0.2575 0.2715 0.2619 B5-3 B5-4 B6-1 B6-3 Group Bin Code B6-2 4 B6-4 IF=20mA CIE_y 0.2960 0.2915 0.3003 0.3035 0.3035 0.3003 0.3090 0.3110 0.3090 0.3070 0.3185 0.3195 0.3110 0.3090 0.3195 0.3205 0.2760 0.2855 0.2950 0.2850 0.2850 0.2950 0.3045 0.2940 0.3045 0.3150 0.3270 0.3165 0.2940 0.3045 0.3165 0.3060 CIE_x CIE_y 0.3195 0.3185 0.3300 0.3300 0.3205 0.3195 0.3300 0.3300 0.3165 0.3270 0.3390 0.3285 0.3060 0.3165 0.3285 0.3180 Notes: The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 6 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Chromaticity Coordinates Specifications for Bin Grading B7-3 5 B7-4 0.2910 0.2879 0.2960 0.2995 0.2995 0.2960 0.3057 0.3080 0.2570 0.2619 0.2760 0.2680 0.2680 0.2760 0.2877 0.2790 IF=20mA 0.2790 0.2877 0.2963 0.2865 0.2865 0.2963 0.3054 0.2940 0.3080 0.3057 0.3128 0.3145 0.3145 0.3128 0.3201 0.3210 B8-3 6 B8-4 Notes: y 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 0.340 0.335 0.330 0.325 0.320 0.315 0.310 0.305 0.300 0.295 0.290 0.285 0.280 0.275 0.270 0.265 0.260 0.255 0.250 0.245 0.26 B6-2 B6-4 B6-1 B6-3 B5-2 B5-1 B5-3 A0-2 B8-3 B7-4 A0-4 A0-1 B8-4 B5-4 B7-3 A0-3 0.27 0.28 0.29 0.30 0.31 0.32 0.33 x Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 7 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 8 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 9 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Carrier Tape Dimensions; Loaded quantity per reel 3500 PCS/reel Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Label Rev. 1 Page: 10 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. Test Sample Ac/Re Hours/Cycles Size 22 PCS 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 2 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 6 Min. Rev. 1 Page: 11 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 12 of 13 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 99-113UTC/710/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6. Handling Indications During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-213-002 prepared date:04-Aug-2005 Rev. 1 Page: 13 of 13 Prepared by: Venis Wu