EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High performance SMD LED with Reflector 93-22/G6R7C-B01/2A0 Features z Package in 12mm tape on 7” diameter reels. z Compatible with automatic placement equipment. z Compatible with infrared and vapor phase reflow solder process. z EIA std. package. z IC compatible. z Pb-free. z The product itself will remain within RoHS compliant version. Applications z Telecommunication: indicator and backlighting in telephone and fax. z Indicator and backlight for audio and video equipment. z Indicator and backlight for battery driven equipment. z Small indicator for outdoor applications. z Indicator and backlight in office equipment. z Flat backlight for LED, switches and symbol. z General use. Device Selection Guide Chip Lens Color Type Material G6 AlGaInP R7 AlGaInP Emitted Color Brilliant Yellow Green Water Clear Dark-Red Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Package Dimensions R7 1 2 4 3 1 1.5±0.15 G6 3.4 Polarity 2.7 4.5±0.4 2 2.7 0.15 2 1 1.5±0.15 Anode Mark 3 4 4.9 0.5 1.4 22.4 1.8 1.4 0.4 Recommended Soldering Pad design. Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Absolute Maximum Ratings @Ta=25℃ Parameter Symbol Rating Unit Reverse Voltage VR 5 V 25 mA 60 mA 60 mW ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Forward Current Forward Current (Duty 1/10 @ 1KHz) Power Dissipation Peak Electrostatic Discharge(HBM) G6 IF R7 G6 IFP R7 G6 Pd R7 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Electro-Optical Characteristics @ Ta=25℃ Parameter Luminous Intensity Symbol IV λp Dominant Wavelength λd Spectrum Radiation Bandwidth △λ Forward Voltage VF Reverse Current Typ. Max. G6 18.0 ----- 36.0 R7 28.0 ----- 57.0 ----- 130 ----- G6 ----- 575 ----- R7 ----- 631 ----- G6 570.5 ----- 574.5 R7 621.0 ----- 628.0 G6 ----- 20 ----- R7 ----- 20 ----- G6 1.6 ----- 2.2 R7 1.6 ----- 2.2 ----- ----- 10 2θ1/2 Viewing Angle Peak Wavelength Min. IR Unit Condition mcd IF=5mA deg IF=5mA nm IF=5mA nm IF=5mA nm IF=5mA V IF=5mA μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Bin Range Of Dominant Wavelength Chip Bin Code Min. Max. Unit Condition 1 2 1 2 570.5 572.5 621.0 624.5 572.5 574.5 624.5 628.5 nm IF=5mA Min Max Unit Condition 18.0 22.5 28.5 28.5 36.0 45.0 22.5 28.5 36.0 36.0 45.0 57.0 mcd IF=5mA Min 1.60 1.95 1.60 1.95 Max 1.95 2.20 1.95 2.20 Unit Condition V IF=5mA G6 R7 Bin Range Of Luminous Intensity Chip Bin G6 R7 M1 M2 N1 N1 N2 P1 Bin Range Of Forward Voltage Chip G6 R7 Bin C D C D Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Typical Electro-Optical Characteristics Curves(G6) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Typical Electro-Optical Characteristics Curves(R7) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Carrier Tape Dimensions: Loaded quantity per reel 1000 PCS/reel Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 2 6 Min. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 93-22/G6R7C-B01/2A0 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 12 of 12 Device No. :DSE-932-038 Prepared date:02-Feb-2007 Prepared by: Ray Yuan