Pb Free Plating Product ISSUED DATE :2005/12/05 REVISED DATE : GJ3310 BVDSS RDS(ON) ID P-CHANNEL ENHANCEMENT MODE POWER MOSFET -20V 150m -10A Description The GJ3310 provide the designer with the best combination of fast switching, low on-resistance and cost-effectiveness. The TO-252 package is universally preferred for all commercial-industrial surface mount applications and suited for low voltage and battery power applications. Features *Simple Drive Requirement *2.5V Gate Drive Capability Package Dimensions TO-252 REF. A B C D E F S Millimeter Min. Max. 6.40 6.80 5.20 5.50 6.80 7.20 2.40 3.00 2.30 REF. 0.70 0.90 0.60 0.90 REF. G H J K L M R Millimeter Min. Max. 0.50 0.70 2.20 2.40 0.45 0.55 0 0.15 0.90 1.50 5.40 5.80 0.80 1.20 Absolute Maximum Ratings Parameter Symbol Ratings Unit Drain-Source Voltage VDS -20 V Gate-Source Voltage VGS ±12 V Continuous Drain Current, VGS@10V ID @TC=25 -10 A Continuous Drain Current, VGS@10V ID @TC=100 -6.2 A -24 A 25 W Pulsed Drain Current 1 IDM Total Power Dissipation PD @TC=25 Linear Derating Factor 0.01 Operating Junction and Storage Temperature Range Tj, Tstg -55 ~ +150 Symbol Value W/ Thermal Data Parameter Unit Thermal Resistance Junction-case Max. Rthj-c 5.0 /W Thermal Resistance Junction-ambient Max. Rthj-a 110 /W GJ3310 Page: 1/5 ISSUED DATE :2005/12/05 REVISED DATE : Electrical Characteristics (Tj = 25 Parameter unless otherwise specified) Symbol Min. Typ. Max. Unit Drain-Source Breakdown Voltage BVDSS -20 - - V Breakdown Voltage Temperature Coefficient BVDSS / Tj - -0.1 - Gate Threshold Voltage VGS(th) -0.5 - - V VDS=VGS, ID=-250uA gfs - 4.4 - S VDS=-5V, ID=-2.8A IGSS - - ±100 nA VGS= ±12V - - -1 uA VDS=-20V, VGS=0 - - -25 uA VDS=-16V, VGS=0 - - 150 - - 250 Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 ) Drain-Source Leakage Current(Tj=150 ) Static Drain-Source On-Resistance IDSS RDS(ON) V/ m Test Conditions VGS=0, ID=-250uA Reference to 25 , ID=-1mA VGS=-4.5V, ID=-2.8A VGS=-2.5V, ID=-2.0A Total Gate Charge2 Qg - 6 - Gate-Source Charge Qgs - 1.5 - Gate-Drain (“Miller”) Change Qgd - 0.6 - Td(on) - 2.5 - Tr - 60 - Td(off) - 70 - Tf - 60 - Input Capacitance Ciss - 300 - Output Capacitance Coss - 180 - Reverse Transfer Capacitance Crss - 60 - Symbol Min. Typ. Max. Unit VSD - - -1.2 V IS=-10A, VGS=0V, Tj=25 IS - - -10 A VD=VG=0V, VS=-1.2V ISM - - -24 A Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time nC ID=-2.8A VDS=-6V VGS=-5V ns VDS=-6V ID=-1A VGS=-5V RG=6 RD=6 pF VGS=0V VDS=-6V f=1.0MHz Source-Drain Diode Parameter 2 Forward On Voltage Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Test Conditions Notes: 1. Pulse width limited by safe operating area. 2. Pulse width 300us, duty cycle 2%. GJ3310 Page: 2/5 ISSUED DATE :2005/12/05 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics GJ3310 Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Maximum Drain Current v.s. Case Temperature Fig 6. Type Power Dissipation Page: 3/5 ISSUED DATE :2005/12/05 REVISED DATE : Fig 7. Maximum Safe Operating Area Fig 9. Gate Charge Characteristics Fig 11. Forward Characteristics of Reverse Diode GJ3310 Fig 8. Effective Transient Thermal Impedance Fig 10. Typical Capacitance Characteristics Fig 12. Gate Threshold Voltage v.s. Junction Temperature Page: 4/5 ISSUED DATE :2005/12/05 REVISED DATE : Fig 13. Switching Time Circuit Fig 14. Switching Time Waveform Fig 15. Gate Charge Circuit Fig 16. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GJ3310 Page: 5/5