Pb Free Plating Product ISSUED DATE :2006/03/28 REVISED DATE : GTT2602 N-CHANNEL ENHANCEMENT MODE POWER MOSFET BVDSS RDS(ON) ID 20V 34m 6.3A Description The GTT2602 utilized advanced processing techniques to achieve the lowest possible on-resistance, extremely efficient and cost-effectiveness device. The GTT2602 is universally used for all commercial-industrial applications. Features *Capable of 2.5V gate drive *Low on-resistance Package Dimensions REF. A A1 A2 c D E E1 Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current3, [email protected] 3 Continuous Drain Current , [email protected] Pulsed Drain Current1,2 Power Dissipation Linear Derating Factor Operating Junction and Storage Temperature Range Thermal Data Parameter Thermal Resistance Junction-ambient3 Max. Symbol VDS VGS ID @TA=25 ID @TA=70 IDM PD @TA=25 Millimeter Min. Max. 1.10 MAX. 0 0.10 0.70 1.00 0.12 REF. 2.70 3.10 2.60 3.00 1.40 1.80 REF. L L1 b e e1 Millimeter Min. Max. 0.45 REF. 0.60 REF. 0° 10° 0.30 0.50 0.95 REF. 1.90 REF. Unit V V A A A W W/ Tj, Tstg Ratings 20 ±12 6.3 5 30 2 0.016 -55 ~ +150 Symbol Rthj-a Value 62.5 Unit /W 1/4 ISSUED DATE :2006/03/28 REVISED DATE : Electrical Characteristics (Tj = 25 Parameter unless otherwise specified) Symbol Min. Typ. Max. Unit Drain-Source Breakdown Voltage BVDSS 20 - - V Breakdown Voltage Temperature Coefficient BVDSS / Tj - 0.1 - Gate Threshold Voltage VGS(th) 0.5 - - V VDS=VGS, ID=250uA gfs - 13 - S VDS=5V, ID=5.3A IGSS - - ±100 nA VGS= ±12V - - 1 uA VDS=20V, VGS=0 - - 10 uA VDS=16V, VGS=0 - - 30 - - 34 - - 50 - - 90 Qg - 8.7 16 Gate-Source Charge Qgs - 1.5 - Gate-Drain (“Miller”) Change Qgd - 3.6 - Td(on) - 6 - Tr - 14 - Td(off) - 18.4 - Tf - 2.8 - Input Capacitance Ciss - 603 1085 Output Capacitance Coss - 144 - Reverse Transfer Capacitance Crss - 111 - Symbol Min. Typ. Max. Unit VSD - - 1.2 V IS=1.2A, VGS=0V Reverse Recovery Time Trr - 16.8 - ns Reverse Recovery Charge Qrr - 11 - nC IS=5A, VGS=0V dI/dt=100A/ s Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 ) Drain-Source Leakage Current(Tj=55 ) 2 Static Drain-Source On-Resistance Total Gate Charge2 Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time IDSS RDS(ON) V/ Test Conditions VGS=0, ID=250uA Reference to 25 , ID=1mA VGS=10V, ID=5.5A m VGS=4.5V, ID=5.3A VGS=2.5V, ID=2.6A VGS=1.8V, ID=1.0A nC ID=5.3A VDS=10V VGS=4.5V ns VDS=15V ID=1A VGS=10V RG=2 RD=15 pF VGS=0V VDS=15V f=1.0MHz Source-Drain Diode Parameter 2 Forward On Voltage 2 Test Conditions Notes: 1. Pulse width limited by Max. junction temperature. 2. Pulse width 300us, duty cycle 2%. 2 3. Surface mounted on 1 in copper pad of FR4 board; 156 /W when mounted on Min. copper pad. 2/4 ISSUED DATE :2006/03/28 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 5. Forward Characteristics of Reverse Diode Fig 2. Typical Output Characteristics Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 6. Gate Threshold Voltage v.s. Junction Temperature 3/4 ISSUED DATE :2006/03/28 REVISED DATE : Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 4/4