MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLY H8711 SERIES PATENT 4 × 4 Multianode, High Speed Response, Low Cross-talk, 30 mm Square Bialkali and Multialkali Photocathode, 12-stage, Head-on Type FEATURES ●4 × 4 Multianode, Anode Size: 4.2 mm × 4.2 mm / Anode ●Effective Area: 18.1 mm × 18.1 mm ●High Speed Response ●Low Cross-talk: 1 % Typ. ●High Cathode Sensitivity Luminous 200 µA/lm Typ. (-01 Type) Luminous 500 µA/lm Typ. (-20 Type) ●Weight: Approx. 50 g APPLICATIONS ●High Energy Physics ●Flow Cytometer (-01, -20 Type) ●DNA Sequencer (-01, -20 Type) Figure 1: Typical Spectral Response 10 TPMHB0738EB 100 CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 100 H8711 H8711-10 H8711-03 H8711-13 1 0.1 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 600 700 WAVELENGTH (nm) 10 TPMHB0739EB -04 TYPE -14 TYPE -01 TYPE -20 TYPE 1 0.1 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 800 900 1000 0.01 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLIES H8711 SERIES Spectral Response Type No. A B C Maximum Ratings Supply Dynode Voltage PhotoBetween Peak Window Wavelength cathode Material Structure Anode and / Stages Material Cathode Range (nm) Normal Divider Type H8711 300 to 650 H8711-01 300 to 880 H8711-03 185 to 650 H8711-04 185 to 880 H8711-20 300 to 920 Taper Divider Type H8711-10 300 to 650 H8711-11 300 to 880 H8711-13 185 to 650 H8711-14 185 to 880 (nm) D Average Anode Output Current in Total (V) (mA) Cathode Characteristics Luminous Red/ Blue Sensitivity White Radiant Index Ratio (CS 5-58) (R-68) Typ. Typ. Typ. Min. Typ. (µA/lm) (µA/lm) (mA/W) 420 420 420 420 530 BA MA BA MA MA K K U U K MC/12 MC/12 MC/12 MC/12 MC/12 -1000 -1000 -1000 -1000 -1000 0.017 0.017 0.017 0.017 0.017 60 150 60 150 350 80 200 80 200 500 9.5 — 9.5 — — — 0.25 — 0.25 0.4 80 65 80 65 78 420 420 420 420 BA MA BA MA K K U U MC/12 MC/12 MC/12 MC/12 -1000 -1000 -1000 -1000 0.017 0.017 0.017 0.017 60 150 60 150 80 200 80 200 9.5 — 9.5 — — 0.25 — 0.25 80 65 80 65 NOTE: A BA: Bialkali, MA: Multialkali B K: Borosilicate glass, U: UV glass C MC: Metal channel D The maximum average anode current is defined as 5 % of divider current when standard high voltage is applied. Figure 2: Typical Gain 107 106 TPMHB0331EA H8711 H8711-03 H8711-10 H8711-13 105 H8711-11 H8711-14 H8711-20 104 SUPPLY VOLTAGE : -800 V RISE TIME : 835 ps FALL TIME : 2047 ps WIDTH : 1658 ps RL : 50 Ω H8711-01 H8711-04 103 TIME (2 ns/div.) 102 500 600 700 800 900 1000 SUPPLY VOLTAGE (V) Figure 4: TTS Characteristic (Example) TPMHB0314EB 104 RELATIVE COUNTS GAIN Figure 3: Time Response (Example) TPMHB0690EC OUTPUT VOLTAGE (2 mV/div.) 108 SUPPLY VOLTAGE: - 800 V FWHM: 310 ps FWTM: 631 ps 103 102 101 100 TIME (0.5 ns/div.) Anode to Cathode Supply Voltage Luminous Min. Typ. (A/lm) (A/lm) (V) Anode Characteristics Dark Current Time Response per Channel Gain Rise Transit TTS Time (After 30 min) Time Typ. Max. Typ. Typ. Typ. Typ. (nA) (nA) (ns) (ns) (ns) -800 -800 -800 -800 -800 80 50 80 50 50 280 150 280 150 250 3.5 × 106 0.8 × 106 3.5 × 106 0.8 × 106 0.5 × 106 -800 -800 -800 -800 20 10 20 10 70 35 70 35 0.9 × 106 0.2 × 106 0.9 × 106 0.2 × 106 0.8 0.4 4 2 0.83 0.83 12.0 12.0 Pulse Linearity per Channel 2% 5% Deviation Deviation (mA) 0.33 Type No. Typ. Max. 1 1: 2.5 1: 3 1: 2.5 1: 3 1: 3 1: 4 1: 5 1: 4 1: 5 1: 5 H8711 H8711-01 H8711-03 H8711-04 H8711-20 3 1: 2.5 1: 3 1: 2.5 1: 3 1: 4 1: 5 1: 4 1: 5 H8711-10 H8711-11 H8711-13 H8711-14 (mA) 0.5 0.33 Uniformity Between Each Anode 1.5 VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Normal Divider Type 2 2 2 1 1 Tapered Divider Type 2.4 2.4 2.4 1 1 Supply Voltage: -800 V, K: Cathode, Dy: Dynode, P: Anode ... 1 ... 1 1 ... 1 Dy9 Dy10 1 1 Dy11 Dy12 P 1 1 1.2 2.4 1 1 Figure 5: Pulse Linearity per Channel (Example) TPMHB0691EA 10 10 TPMHB0692EA PULSE WIDTH: 50 ns REPETITION: 1 kHz SUPPLY VOLTAGE: -800 V PULSE WIDTH: 50 ns REPETITION: 1 kHz SUPPLY VOLTAGE: -800 V DEVIATION (%) DEVIATION (%) 0 Divider Ratio 2:2:2 :1:⋅⋅⋅⋅:1:1:1 -10 -20 10-2 10-1 100 OUTPUT CURRENT (mA) H8711 Figure 6: Anode Cross-talk (Example) 0.1 0.8 0.1 * 0.5 100 0.3 * 0.1 0.3 0.1 * * * * * Supply Voltage: -800 V Light Source: Tungsten Lamp (uniform DC light) Spot Illumination: 4 mm × 4 mm 101 0 Divider Ratio 2.4 : 2.4 : 2.4 : 1 : ⋅ ⋅ ⋅ ⋅ : 1 : 1.2 : 2.4 -10 -20 10-2 10-1 100 OUTPUT CURRENT (mA) H8711-10 101 MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLIES H8711 SERIES Figure 7: Dimensional Outline and Basing Diagram (Unit: mm) POM CASE 14 45.0 ± 0.8 0.8 MAX. 4.5 DY GND -HV P8 P9 13 4.5 P16 GND 2.8 2.54 2.54 × 7=17.78 18.1 25.7 SIDE VIEW BOTTOM VIEW TOP VIEW GND DY12 OUTPUT GUIDE MARK ANODE OUTPUTS (P1 to P8) TERMINAL PINS ( 0.46) BDL-108, SAMTEC 2 0.65 3 4-SCREWS (M2) 12.7 P1 2.54 15 30.0 ± 0.5 8.7 16 18.1 1 9.3 0.3 2 25.7 3 DIVIDER ASSEMBLY 7.62 4- 0.3 GUIDE MARKS 0.3 4 PMT: R7600-M16 SERIES 2.54 8.7 5.08 9.3 Y THROUGH HOLE (NO CONNECTION) -HV INPUT PIN CONNECTION P1 P2 P3 P4 P5 P6 P7 P8 GND GND GND GND GND GND GND GND -HV TERMINAL PINS ( 0.46) BBL-TYPE, SAMTEC DY12 OUTPUT TERMINAL PINS ( 0.46) BBL-102, SAMTEC ANODE OUTPUTS (P9 to P16) P9 P10 P11 P12 P13 P14 P15 P16 TERMINAL PINS ( 0.46) GND GND GND GND GND GND GND GND BDL-108, SAMTEC X Figure 8: Internal Circuit TERMINAL PINS (BDL-108, SAMTEC) P1 P2 P8 K P9 F DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12 P15 P16 ANODE1 OUTPUT GND ANODE2 OUTPUT GND ANODE8 OUTPUT GND Normal Divider Type TERMINAL PINS (BDL-108, SAMTEC) ANODE9 OUTPUT GND ANODE15 OUTPUT GND ANODE16 OUTPUT GND Tapered Divider Type R1 to R3, R13 : 360 kΩ R4 to R11 : 150 kΩ R12 : 180 kΩ R14 : 1 MΩ R15 to R17 : 51 Ω R18 : 10 kΩ C1 to C4 : 0.01 µF R1 to R3 : 360 kΩ R4 to R13 : 180 kΩ R14 : 1 MΩ R15 to R17 : 51 Ω R18 : 10 kΩ C1 to C4 : 0.01 µF DIVIDER CURRENT: 347 µA at -1000 V (Max. INPUT VOLTAGE) DIVIDER CURRENT: 355 µA at -1000 V (Max. INPUT VOLTAGE) C4 R14 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R15 R11 R16 R12 R17 R13 C1 C2 C3 R18 TERMINAL PINS (BBL-102, SAMTEC) GND DY12 OUTPUT TERMINAL PINS (BBL-TYPE, SAMTEC) GND -HV INPUT TPMHA0497ED Figure 9: Suitable Sockets (Unit: mm) Supplied SD-108-T-22 ×2 pcs (for Anode Output Pins) SS-102-T-22 (for GND, DY12 Pin) 2.54 7.62 2.54 2.54 2.54 7.62 3.18 2.54 1.32 0.51 2.54 2.54 1.83 5.08 0.76 5.08 2.54 20.32 ASP-24307-02 (for GND, -HV Pin) 2.54 (TYP.) TACCA0263EA TACCA0265EA TACCA0266EA WARNING ~ High Voltage ~ The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments. * PATENT: USA: 5410211 and other(9), GBR: 551767 and other(9), DEU: 69209809 and other(9), FRA: 551767 and other(9), JPN: 3078905 and other(9) WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] TPMH1278E06 SEPT. 2007 IP