R11265U SERIES / H11934 SERIES

PHOTOMULTIPLIER TUBES AND
PHOTOMULTIPLIER TUBE ASSEMBLIES
R11265U SERIES / H11934 SERIES
High Speed Response, 30 mm Square
Super Bialkali and Ultra Bialkali Photocathode
Metal Channel Dynode 12-stage, Head-on Type
FEATURES
● Wide Effective Area: 23 mm × 23 mm
● High Speed Response
● Compact
● Light Weight: Approx. 31 g (R11265U Series)
Approx. 74 g (H11934 Series)
●R11265 Series with Divider Circuit (H11934 Series)
APPLICATIONS
●High Energy Physics
●Scintillation Counting
Left: R11265U series, Right: H11934 series
Figure 1: Typical Spectral Response
TPMHB0869EA
108
TPMHB0870EA
107
R11265U-200
100
106
10
R11265U-200
105
GAIN
CATHODE RADIANT SENSITIVITY (mA/W)
QUANTUM EFFICIENCY (%)
1000
Figure 2: Typical Gain
R11265U-100
104
1
R11265U-100
103
0.1
102
STANDARD DIVIDER
TAPERED DIVIDER
CATHODE RADIANT SENSITIVITY
QUANTUM EFFICIENCY
0.01
200
300
400
500
600
WAVELENGTH (nm)
700
800
101
500
600
700
800
900
1000
SUPPLY VOLTAGE (V)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2013 Hamamatsu Photonics K.K.
PHOTOMULTIPLIER TUBES AND PHOTOMULTIPLIER TUBE ASSEMBLIES
R11265U SERIES / H11934 SERIES
Spectral Response
Cathode Characteristics
Maximum Ratings
Anode to
E
E
Supply Average Luminous
Blue
Cathode
Quntum
Dynode Voltage Anode
PhotoSensitivity
Radiant Supply
Between
Peak
Window
Index
Output
Structure
cathode
Efficiency
Anode
Material
Wavelength
(CS 5-58)
Voltage
/ Stages and Current Min. Typ. Typ.
Material
Typ.
Typ.
Cathode in Total
(V)
(mA) (µA/lm) (µA/lm)
(nm)
(%) (mA/W) (V)
A
B
C
Type No.
Range
R11265U-100
300 to 650
400
SBA
K
MC/12
-1000
0.1
75
95
13.5
35
110
-900
R11265U-200
300 to 650
400
UBA
K
MC/12
-1000
0.1
75
120
15.5
43
130
-900
H11934-100
H11934-200
H11934-100-10
H11934-200-10
300 to 650
300 to 650
300 to 650
300 to 650
400
400
400
400
SBA
UBA
SBA
UBA
K
K
K
K
MC/12
MC/12
MC/12
MC/12
-1000
-1000
-1000
-1000
0.018
0.018
0.018
0.018
75
75
75
75
95
120
95
120
13.5
15.5
13.5
15.5
35
43
35
43
110
130
110
130
-900
-900
-900
-900
(nm)
NOTE: A SBA: Super bialkali, UBA: Ultra bialkali
B K: Borosilicate glass
C MC: Metal channel
D Quantum efficiency is measured at the peak sensitivitiy wavelength (350 nm).
E Cathode radiant sensitivity is measured at the peak sensitivity wavelength (400 nm).
Figure 3: Time Response (Example)
Figure 4: Single Photon Counting (Example)
TPMHB0871EA
1600
TPMHB0872EA
SIGNAL + DARK: 4333 s-1
1400
RL = 50 Ω
SUPPLY VOLTAGE: -900 V
INCIDENT LIGHT PULSE
WAVELENGTH: 400 nm
PULSE WIDTH : 70 ps
RISE TIME: 1.3 ns
FALL TIME: 5.8 ns
RELATIVE COUNT
SIGNAL (100 mV/div)
1200
1000
800
TIME (5 ns/div)
400
TPMHB0875EA
Scintillator: 1/2" × 1/2" LaBr3(Ce)
Source: 137Cs
Supply Voltage: -900 V, at 25 °C
500
400
300
High Energy
Resolution
200
3.1 %
100
0
0
200
400
600
800
1000 1200 1400 1600 1800 2000
ADC CHANNEL
Typical Energy Resolution for Metal Package PMTs
57Co
137Cs
R7600U-200
7.7 %
3.2 %
Scintillator: 1/2" LaBr3(Ce)
R8900U-100
8.4 %
3.5 %
DARK: 238 s-1
200
0
200
400
600
ADC CHANNEL (ch)
Figure 5: Energy Resolution
600
STANDARD DIVIDER
600
0
RELATIVE COUNTS
TYPE: R11265U-200
HV: -900 V
MEAS. TIME: 100 s
AMBIENT TEMP.:25 °C
WL OF INCIDENT
PHOTONS: 400 nm
R11265U-200
7.4 %
3.1 %
800
1000
Anode Characteristics
Luminous
Gain
Min.
(A/lm)
Typ.
(A/lm)
15
(10)
15
(10)
80
(35)
160
(60)
8.4
(3.7
1.3
(5.0
80
160
(35)
(60)
15
15
(10)
(10)
Dark Current
(After 30 min)
Typ.
Typ.
(nA)
Max.
(nA)
105
105)
106
105)
2
20
2
20
8.4 ×
1.3 × 106
(3.7 × 105)
(5.0 × 105)
2
2
2
2
20
20
20
20
×
×
×
×
Pulse Linearity
Time Response
Operating
Storage
Rise Transit
Ambient
±5
%
T.T.S.
±2
%
Time
Time
Temperature
Deviation Deviation Temperature
Typ.
Typ.
Typ.
(mA)
(°C)
(ns)
(mA)
(°C)
(ns)
(ns)
Type No.
R11265U-100
-30 to +50 -30 to +50
105
1.3
5.8
0.27
(0.30)
20
(300)
60
(400)
(0.30)
(300)
(400)
R11265U-200
H11934-100
H11934-200
0 to +50 -15 to +50
H11934-100-10
H11934-200-10
( ): Measured with the special voltage distribution ratio (Tapered Divider) shown below.
VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE
Electrodes
K
Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 Dy11 Dy12
P
Standard Divider Type
2.5
1.3
0.8
0.8
1
1
1
1
1
1
1
1
0.5
Tapered Divider Type
3.3
1.6
1
1
1
1
1
1
1
1
1
2.7
1.3
Supply Voltage: -900 V, K: Cathode, Dy: Dynode, P: Anode
Figure 6: T.T.S. Characteristic (Example)
Figure 7: Effect of Magnetic Fields on Anode Output (Example)
TPMHB0873EA
1.2
10000
SUPPLY VOLTAGE: -900 V
FWHM: 0.27 ns
STANDARD DIVIDER
TPMHB0874EE
1
Y-AXIS
RELATIVE OUTPUT
COUNTS
1000
100
0.8
X-AXIS
0.6
Z-AXIS
0.4
10
0.2
SUPPLY VOLTAGE: -900 V
STANDARD DIVIDER
1
0
-20
TIME (1 ns/div)
-15
-10
-5
0
5
10
15
20
Z
MAGNETIC FLUX DENSITY (mT)
X
Y
Guide Conner (at Rear Side)
TOP VIEW
Figure 8: Dimensional Outline and Basing Diagram (Unit: mm)
● R11265U Series
30.0 ± 0.5
0.6 ± 0.4
3.5 ± 0.7
4.2 MAX.
USEFUL AREA
TOP VIEW
PHOTOCATHODE
SIDE VIEW
22.95
2.22 PITCH
18.7 ± 0.5
19- 0.45
23 MIN.
12.0 ± 0.5
+0
26.2 - 0.5
22.56
BOTTOM VIEW
K
IC (P)
Dy1
Dy2
Dy3
IC (P)
Dy4
Dy5
Dy6
IC (P)
1
28
27
26
25
24
23
22
21
20
7
8
9
10
11
12
13
14
15
P
Dy12
Dy11
Dy10
IC (P)
Dy9
Dy8
Dy7
IC (P)
K : Photocathode
Dy : Dynode
P : Anode
IC : Internal Connection
(Don't Use)
TPMHA0585EA
PHOTOMULTIPLIER TUBES AND PHOTOMULTIPLIER TUBE ASSEMBLIES
R11265U SERIES / H11934 SERIES
Figure 9: Dimensional Outline and Circuit Diagram (Unit: mm)
● H11934 Series
SIGNAL OUTPUT: RG-174/U (BLACK)
-HV: RG-174/U (RED)
DIVIDER ASSEMBLY
POM CASE
ADHESIVE
PHOTOCATHODE
23 MIN.
5-SCREWS(M2)
26.2
SIG
-HV
0.8 MAX.
+50
32.5 ± 0.5
10
1500 - 0
5
30.0 ± 0.5
H11934-100/-200
H11934-100-10/-200-10
K
K
P
DY1
DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11
R21
R19
R1
P
DY1
DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R16
R13
R17
R14
R18
R15
C1
C2
C3
R1 : 300 kΩ
R2, R7 to R14 : 200 kΩ
R3, R4 : 130 kΩ
R5, R6 : 160 kΩ
R15 : 100 kΩ
R16 to R18 : 51 Ω
R19 : 1 MΩ
C1 to C3 : 0.01 µF
-HV
RG-174/U (RED)
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R18
R13
R12
R19
R14
C1
SIGNAL OUTPUT
RG-174/U (BLACK)
DY12
R20
R15 R16
C2
C3
R1 : 300 kΩ
R2, R14, R15 : 200 kΩ
R3, R4 : 120 kΩ
R5 to R13 : 150 kΩ
R16, R17 : 100 kΩ
R18 to R20 : 51 Ω
R21 : 1 MΩ
C1 to C3 : 0.01 µF
-HV
RG-174/U (RED)
R17
SIGNAL OUTPUT
RG-174/U (BLACK)
NOTE: DIVIDER RATIO=3.3: 1.6: 1: 1: .....1: 2.7: 1.3
TOTAL RESISTANCE=2.69 MΩ, DIVIDER CURRENT=371.7 µA at -1000 V (MAX.)
NOTE: DIVIDER RATIO=2.5: 1.3: 0.8: 0.8: 1: 1: .....1: 0.5
TOTAL RESISTANCE=2.78 MΩ, DIVIDER CURRENT=359.7 µA at -1000 V (MAX.)
TPMHA0586EA
[ACCESSORIES] (Unit: mm) SOLD SEPARATELY
● Socket E678-19K
● Socket Assemblies E11807, E11807-01
E11807
2.22 × 8=17.76
PMT
8.88
26.0 ± 0.5
15.0 ± 0.5
C5.0
SOCKET
PIN No.
7
C3
R16
R20
8
SIGNAL OUTPUT
RG-174/U (BLACK)
R17
P
C3
R20
DY12
DY12
R16
8
R15
DY11
R15
POM
HOUSING
DY10
R19
R14
R18
R13
DY11
DY10
DY9
12
DY8
13
DY7
14
DY6
21
R11
R10
R9
10
22
R7
ORIENTATION
BY MARKING
DY4
23
DY3
25
DY2
26
R19
R14
R18
R13
9
C1
10
R12
DY5
C2
9
R8
5
2.22 × 9=19.98
P
PIN No.1
450 ± 10
11.1
SIGNAL OUTPUT
RG-174/U (BLACK)
R17
+0
22.95
8.88
PMT
C2
3.0 ± 0.1
5-R1.5
26.2 - 0.3
12.7
22.56
26.0 ± 0.5
E11807-01
SOCKET
PIN No.
7
DY9
12
DY8
13
DY7
14
DY6
21
DY5
22
DY4
23
DY3
25
DY2
26
R11
R10
R9
R8
R6
(5.1)
R5
R5
R4
R4
R3
DY1
NOTE: Don't touch socket holes while
high voltage is supplied in circuit.
R3
27
DY1
27
R2
R2
K
K
R21
TACCA0313EA
R1 : 300 kΩ
R2, R14, R15 : 200 kΩ
R3, R4 : 120 kΩ
R5 to R13 : 150 kΩ
R16, R17 : 100 kΩ
R18 to R20 : 51 Ω
R21 : 1 MΩ
C1 to C3 : 0.01 µF
R7
R6
POTTING
COMPOUND
C1
10
R12
R1 : 300 kΩ
R2, R7 to R13 : 200 kΩ
R3, R4 : 130 kΩ
R5, R6 : 160 kΩ
R14 to R16 : 100 kΩ
R17 : 0 Ω
R18 to R20 : 51 Ω
R21 : 1 MΩ
C1 to C3 : 0.01 µF
1
R1
-HV
RG-174/U (RED)
NOTE: DIVIDER RATIO=2.5: 1.3: 0.8: 0.8: 1: 1: ..... 1: 0.5
R21
1
R1
-HV
RG-174/U (RED)
NOTE: DIVIDER RATIO=3.3: 1.6: 1: 1: ..... 1: 2.7: 1.3
TACCA0314EA
WARNING ~ High Voltage ~
The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode
(potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded).
Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments.
* C4900 and C4900-01 can be used for R11265U series / H11934 series.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TPMH1336E01
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected]
China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, 27 Dongsanhuan Road North, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]
MAR. 2013 IP