HANBit HMD8M32M16EBG 32Mbyte(8Mx32) 72-pin EDO MODE 2K Ref. SIMM Design 5V Part No. HMD8M32M16EBG GENERAL DESCRIPTION The HMD8M32M16EBG is a 8M x 32bit dynamic RAM high density memory module. The module consists of sixteen CMOS 4M x 4bit DRAMs in 24-pin SOJ packages mounted on a 72-pin, double-sided, FR-4-printed circuit board. A 0.1 or 0.22uF decoupling capacitor is mounted on the printed circuit board for each DRAM components. The module is a single In-line Memory Module with edge connections and is intended for mounting in to 72-pin edge connector sockets. All module components may be powered from a single 5V DC power supply and all inputs and outputs are TTL-compatible. FEATURES PIN ASSIGNMENT w Part Identification HMD8M32M16EB---- 2048 Cycles/32ms Ref. Solder PIN HMD8M32M16EBG-- 2048 Cycles/32ms Ref. Gold w Access times : 50, 60ns w High-density 32MByte design w Single + 5V ±0.5V power supply w JEDEC standard PDpin and pinout w EDO mode operation w TTL compatible inputs and outputs w FR4-PCB design OPTIONS MARKING w Timing SYMBOL PIN SYMBOL PIN SYMBOL 1 Vss 25 DQ22 49 DQ8 2 DQ0 26 DQ7 50 DQ24 3 DQ16 27 DQ23 51 DQ9 4 DQ1 28 A7 52 DQ25 5 DQ17 29 NC 53 DQ10 6 DQ2 30 Vcc 54 DQ26 7 DQ18 31 A8 55 DQ11 8 DQ3 32 A9 56 DQ27 9 DQ19 33 /RAS3 57 DQ12 10 Vcc 34 /RAS2 58 DQ28 11 NC 35 NC 59 Vcc 50ns access -5 12 A0 36 NC 60 DQ29 60ns access -6 13 A1 37 NC 61 DQ13 14 A2 38 NC 62 DQ30 15 A3 39 Vss 63 DQ14 16 A4 40 /CAS0 64 DQ31 17 A5 41 /CAS2 65 DQ15 18 A6 42 /CAS3 66 NC w Packages 72-pin SIMM M PRESENCE DETECT PINS Pin 50ns 60ns PD1 NC NC PD2 Vss Vss PD3 Vss NC PD4 Vss NC PERFORMANCE RANGE Speed TRAC tCAC tRC tHPC 5 50ns 13ns 90ns 26ns 6 60ns 15ns 110ns 30ns 19 A10 43 /CAS1 67 PD1 20 DQ4 44 /RAS0 68 PD2 21 DQ20 45 /RAS1 69 PD3 22 DQ5 46 NC 70 PD4 23 DQ21 47 /WE 71 NC 24 DQ6 48 NC 72 SIMM TOP VIEW Vss Note: A11 is not used for HMD8M32M16EB URL:www.hbe.co.kr REV.1.0 (August.2002) -1- HANBit Electronics Co.,Ltd. HANBit HMD8M32M16EBG FUNCTIONAL BLOCK DIAGRAM /CAS0 /RAS0 /CAS /RAS U1 /OE /W A0 -A10(A11) DQ1 DQ2 DQ3 . DQ4 /CAS DQ1 /RAS U3 DQ2 /OE DQ3 /W A0 -A10(A11) DQ4 /CAS1 DQ0-3 DQ4-7 DQ1 DQ2 DQ3 DQ4 /CAS /RAS /OE A0-A10(A11) /W DQ1 DQ2 DQ3 DQ4 /CAS /RAS /OE A0-A10(A11) /W DQ1 DQ2 DQ3 DQ4 /CAS /RAS /OE A0-A10(A11) /W DQ1 DQ2 DQ3 DQ4 /CAS /RAS /OE A0-A10(A11) /W DQ1 DQ2 DQ3 DQ4 /CAS /RAS /OE A0-A10(A11) /W U9 /RAS1 U11 DQ8-11 /CAS DQ1 /RAS U5 DQ2 /OE DQ3 /W A0 -A10(A11) . DQ4 U13 DQ12-15 /CAS DQ1 /RAS DQ2 U7 /OE DQ3 /W A0 -A10(A11). DQ4 U15 /CAS2 /RAS2 /CAS DQ1 /RAS U2 DQ2 /OE DQ3 /W A0 -A10(A11). DQ4 DQ16-19 U10 DQ20-23 /CAS DQ1 /RAS DQ2 U4 /OE DQ3 /W A0 -A10(A11). DQ4 DQ1 DQ2 DQ3 DQ4 A0-A10(A11) DQ1 DQ2 DQ3 DQ4 /CAS /RAS /OE A0-A10(A11) /W DQ1 DQ2 DQ3 DQ4 /CAS /RAS /OE A0-A10(A11) /W U12 /CAS /RAS /OE /W /CAS3 DQ24-27 /CAS DQ1 /RAS DQ2 U6 /OE DQ3 /W A0 -A10(A11). DQ4 U14 DQ28-31 /CAS DQ1 /RAS U8 DQ2 /OE DQ3 /W A0 -A10(A11). DQ4 U16 /WE A0-A10 (A11) URL:www.hbe.co.kr REV.1.0 (August.2002) -2- HANBit Electronics Co.,Ltd. /RAS3 HANBit HMD8M32M16EBG ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATING VIN ,OUT -1V to 7.0V Voltage on Vcc Supply Relative to Vss Vcc -1V to 7.0V Power Dissipation PD 16W TSTG -55oC to 150oC Voltage on Any Pin Relative to Vss Storage Temperature Short Circuit Output Current IOS 50mA w Permanent device damage may occur if " Absolute Maximum Ratings" are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. RECOMMENDED DC OPERATING CONDITIONS ( Voltage reference to VSS, TA=0 to 70 o C ) PARAMETER SYMBOL MIN TYP. MAX UNIT Supply Voltage Vcc 4.5 5.0 5.5 V Ground Vss 0 0 0 V Input High Voltage VIH 2.4 - Vcc+1 V Input Low Voltage VIL -1.0 - 0.8 V DC AND OPERATING CHARACTERISTICS SYMBOL SPEED MIN MAX UNITS ICC1 -5 - 816 Ma -6 - 736 MA ICC2 Don't care - 32 MA ICC3 -5 - 816 MA -6 - 736 MA -5 - 896 MA -6 - 816 MA ICC5 Don't care - 16 MA ICC6 -5 - 816 MA -6 - 736 MA Il(L) -80 80 µA IO(L) -10 10 µA VOH 2.4 - V VOL - 0.4 V ICC4 ICC1 : Operating Current * (/RAS , /CAS , Address cycling @tRC=min.) ICC2 : Standby Current ( /RAS=/CAS=VIH ) ICC3 : /RAS Only Refresh Current * ( /CAS=V IH, /RAS, Address cycling @tRC=min ) ICC4 : Fast Page Mode Current * (/RAS=VIL, /CAS, Address cycling @tPC=min ) URL:www.hbe.co.kr REV.1.0 (August.2002) -3- HANBit Electronics Co.,Ltd. HANBit HMD8M32M16EBG ICC5 : Standby Current (/RAS=/CAS=Vcc-0.2V ) ICC6 : /CAS-Before-/RAS Refresh Current * (/RAS and /CAS cycling @t RC=min ) IIL : Input Leakage Current (Any input 0V ≤ VIN ≤ 6.5V, all other pins not under test = 0V) IOL : Output Leakage Current (Data out is disabled, 0V ≤ VOUT ≤ 5.5V VOH : Output High Voltage Level (IOH= -5mA ) VOL : Output Low Voltage Level (IOL = 4.2mA ) * NOTE: ICC1, ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open. ICC is specified as an average current. In ICC1 and ICC3, address cad be changed maximum once while /RAS=VIL. In ICC4, address can be changed maximum once within one page mode cycle. CAPACITANCE o ( TA=25 C, Vcc = 5V, f = 1Mz ) DESCRIPTION SYMBOL MIN MAX UNITS Input Capacitance (A0-A11) CIN1 - 100 pF Input Capacitance (/W) C IN2 - 130 pF Input Capacitance (/RAS0) CIN3 - 40 pF Input Capacitance (/CAS0-/CAS3) CIN4 - 30 pF Input/Output Capacitance (DQ0-31) CDQ1 - 20 pF AC CHARACTERISTICS o ( 0 C ≤ TA ≤ 70oC , Vcc = 5V±10%, See notes 1,2.) -5 STANDARD OPERATION -6 SYMBOL UNIT MIN MAX MAX Random read or write cycle time tRC Access time from /RAS tRAC 50 60 ns Access time from /CAS tCAC 13 15 ns Access time from column address tAA 25 30 ns /CAS to output in Low-Z tCLZ 3 Output buffer turn-off delay tOFF 3 13 3 13 ns Transition time (rise and fall) tT 2 50 2 50 ns /RAS precharge time tRP 30 /RAS pulse width tRAS 50 /RAS hold time tRSH 13 15 ns /CAS hold time tCSH 38 45 ns /CAS pulse width tCAS 8 10K 10 10K ns /RAS to /CAS delay time tRCD 20 37 20 45 ns /RAS to column address delay time tRAD 15 25 15 30 ns /CAS to /RAS precharge time tCRP 5 5 ns Row address set-up time tASR 0 0 ns Row address hold time tRAH 10 10 ns Column address set-up time tASC 0 0 ns URL:www.hbe.co.kr REV.1.0 (August.2002) -4- 90 MIN 110 ns 3 ns 40 10K 60 ns 10K ns HANBit Electronics Co.,Ltd. HANBit HMD8M32M16EBG Column address hold time tCAH 8 10 ns Column Address to /RAS lead time tRAL 25 30 ns Read command set-up time tRCS 0 0 ns Read command hold referenced to /CAS tRCH 0 0 ns Read command hold referenced to /RAS tRRH 0 0 Write command hold time tWCH 10 10 ns Write command hold referenced to /RAS tWCR 50 55 ns Write command pulse width tWP 10 10 ns Write command to /RAS lead time tRWL 13 10 ns Write command to /CAS lead time tCWL 8 10 ns Data-in set-up time tDS 0 0 ns Data-in hold time tDH 8 10 ns Refresh period tREF Write command set-up time tWCS 0 0 ns /CAS setup time (C-B-R refresh) tCSR 5 5 ns /CAS hold time (C-B-R refresh) tCHR 10 10 ns /RAS precharge to /CAS hold time tRPC 5 5 ns Access time from /CAS precharge tCPA /CAS precharge time (Fast page) tCP 8 /RAS pulse width (Fast page ) tRASP 50 /W to /RAS precharge time (C-B-R tWRP 10 32 ns 32 30 35 10 200K 60 10 ns ns ns 200K ns ns refresh) /W to /RAS hold time (C-B-R refresh) tWRH 10 10 ns NOTES 1.An initial pause of 200µs is required after power-up followed by any 8 /RAS-only or /CAS-before-/RAS refresh cycles before proper device operation is achieved. 2.VIH (min) and VIL (max) are reference levels for measuring timing of input signals. Transition times are measured between VIH(min) and VIL(max) and are assumed to be 5ns for all inputs. 3.Measured with a load equivalent to 1TTL loads and 100pF 4.Operation within the tRCD(max) limit insures that tRAC(max) can be met. tRCD(max) is specified as a reference point only. If tRCD is greater than the specified tRCD(max) limit, then access time is controlled exclusively by t CAC. 5.Assumes that tRCD ≥ tRCD(max) 6. tAR, tWCR, tDHR are referenced to tRAD(max) 7.This parameter defines the time at which the output achieves the open circuit condition and is not referenced to V OH or VOL. 8. tWCS, tRWD, tCWD and tAWD are non restrictive operating parameter. They are included in the data sheet as electrical characteristic only. If t WCS ≥ tWCS(min) the cycle is an early write cycle and the data out pin will remain high impedance for the duration of the cycle. 9. Either tRCH or tRRH must be satisfied for a read cycle. 10. These parameters are referenced to the /CAS leading edge in early write cycles and to the /W leading edge in readwrite cycles. 11. Operation within the tRAD(max) limit insures that tRAC(max) can be met. tRAD(max) is specified as a reference point only. If tRAD is greater than the specified tRAD(max) limit. then access time is controlled by tAA. URL:www.hbe.co.kr REV.1.0 (August.2002) -5- HANBit Electronics Co.,Ltd. HANBit HMD8M32M16EBG TIMING DIAGRAMS TIMING WAVEFORM OF READ CYCLE /RAS tRC tRAS VIHVIL- tCRP /CAS tCSH tRCD VIL- VIL- tCAS tRAD tASR tRAH tCAH tASC ROW ADDRESS tRAL COLUMN ADDRESS tRCS VIH/W VIL- tRCH tRRH tWEZ tCEZ tAA tOEZ VIH- tOEA /OE V IL- DQ0-DQ7 tCRP tRSH VIH- VIHA tRP tCAC tCLZ tRAC VOHVOL- tREZ DATA-OUT OPEN TIMING WAVEFORM OF WRITE CYCLE (EARLY WRITE) NOTE : Dout = Open tRC tRAS /RAS V IH- tRP VILtCRP /CAS A tCSH tRCD VIHVIL- tCAS tRAD tASR tRAH VIHVIL- VIH- tCRP tRSH tCAH tASC ROW ADDRESS tRAL COLUMN ADDRESS tCWL tRWL tWCS tWCH tWP /W VIL- VIH/OE VIL- tDS DQ0-DQ7 tDH VOHDATA-IN VOL- URL:www.hbe.co.kr REV.1.0 (August.2002) -6- HANBit Electronics Co.,Ltd. HANBit HMD8M32M16EBG PACKAGING INFORMATION SIMM Design 2.54 mm 0.25 mm MAX MIN 1.27 mm 1.27 ±0.08mm Gold : 1.04±0.10 mm Solder:0.914±0.10mm ORDERING INFORMATION Part Number Density Org. Package HMD8M32M16EBG-5 32MByte 8MX 32bit 72Pin-SIMM HMD8M32M16EBG-6 32MByte 8MX 32bit 72Pin-SIMM URL:www.hbe.co.kr REV.1.0 (August.2002) -7- Component Vcc Access Time 16EA 5V 50ns 16EA 5V 60ns Number HANBit Electronics Co.,Ltd.