5.5*4.4 mm DIA ELLIPSE LED LAMP L-763UBC PACKAGE DIMENSIONS Note: 1.All Dimensions are in millimeters. 2.Tolerance is ±0.25mm(0.010 ") Unless otherwise specified. 3.Protruded resin under flange is 1.5mm(0.059 ") max. 4.Lead spacing is measured where the leads emerge from the package. 5.Specification are subject to change without notice. 6.highlight <-500V the led can withstand the max static level when assembling or operation. DRAWING NO. : DATE : Page : 1 5.5*4.4 mm DIA ELLIPSE LED LAMP L-763UBC FEATURES * SUITABLE HIGH PULSE CURRENT OPERATION * EXTRA HIGH RADIANT POWER AND RADIANT INTENSITY * HIGH RELIABILITY * LOW FORWARD VOLTAGE CHIP MATERIALS * Dice Material : GaInN/GaN * Light Color : ULTRA BLUE * Lens Color : WATER CLEAR ABSOLUTE MAXIMUM RATING:(Ta＝25°C) SYMBOL ULTRA BLUE UNIT 120 mW PAD DESCRIPTION Power Dissipation Per Chip VR Reverse Voltage Per Chip 5 V IF Average Forward Current Per Chip 30 mA - Derating Linear From 25°C Per Chip 0.4 mA/°C Topr Operating Temperature Range -25°C to 85°C Tstg Storage Temperature Range -40°C to 85°C Lead Soldering Temperature｛1.6mm(0.063 inch) From Body｝260°C±5°C For 5 Seconds ELECTRO-OPTICAL CHARACTERISTICS:(Ta=25°C) SYMBOL DESCRIPTION TEST CONDITION MIN. TYP. MAX. UNIT 3.5 4.0 V 100 µA VF Forward Voltage IF = 20mA IR Reverse Current VR = 5V λD Dominant Wavelength IF = 20mA 470 nm ∆λ Spectral Line Half-Width IF = 20mA 30 nm 2θ1/2 Half Intensity Angle(H/V) IF = 20mA 20/55 deg Luminous Intensity IF = 20mA IV DRAWING NO. : DATE : - 2500 - mcd Page : 2 5.5*4.4 mm DIA ELLIPSE LED LAMP L-763UBC （ DRAWING NO. : DATE : ） Page : 3