HITTITE HMC610LP4E

HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Typical Applications
Features
The HMC610LP4(E) is ideal for:
Accurate RMS-to-DC Conversion: DC to 3.9 GHz[1]
• Cellular / PCS / 3G
Input Dynamic Range of >70 dB:
-60 to +10 dBm in 50 Ohms
• WiMAX, WiBro, Fixed Wireless, & Military
Waveform & Modulation Independent:
GSM / CDMA / TDMA
• RF & Microwave Instrumentation
8
• Power Amplifier Linearization / Control Loops
Linear-in-dB Output: Scaled 37 mV/dB
• Transmitter Power Control
Operates from 4.5 to 5.5V from -40°C to +85°C
POWER DETECTORS - SMT
• Transmitter Signal Strength Indication
Power-Down Mode
Compact 4x4mm Leadless SMT Package
Functional Diagram
General Description
The HMC610LP4(E) is a true RMS power detector
capable of providing a ±1 dB measurement dynamic
range of more than 70 dB. It converts any RF input
signal at its differential input, regardless of modulation
or waveform complexity, to an accurately scaled linearin-dB output response that is equivalent to the RootMean-Square (RMS) of the input waveform.
For normal operation, the RMSOUT pin is shorted to
the VSET input, and will provide a nominal logarithmic
slope of 37 mV/dB and an intercept of -70 dBm for
frequencies up to 2 GHz; other slopes are achieved
with external resistors connected between RMSOUT
and VSET pins. Temperature stability is excellent
with ±0.5 dB error from -40°C to 85°C maintained from
100 MHz to 3.9 GHz.
Electrical Specifications, TA = +25C, Vcc= 5V, Zo= 50Ω [2]
Parameter
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Units
Input Frequency
900
1900
2200
2700
3000
3500
3900
MHz
73
72
71
68
65
56
42
dB
Deviation from output @ 25°C, -45°C < TA < 85°C; Pin = -50dBm
-0.9
-1.1
-1.2
-1.5
-0.8
-0.8
-1.0
dB
Deviation from output @ 25°C, -45°C < TA < 85°C; Pin = -20dBm
0.5
0.3
0.2
0.3
0.6
0.4
0.3
dB
Deviation from output @ 25°C, -45°C < TA < 85°C; Pin = 5dBm
0.8
0.5
0.4
0.8
1.2
1.3
1.3
dB
Dynamic Range
± 1dB linearity, CW Input
Deviation vs. Temperature
[1] Low frequency operation determined by external components
[2] Differential Input Drive Via 1:1 Balun Transformer, VTGT Connected to VREF, RMSOUT Connected to VSET, Unless Otherwise Noted.
8 - 32
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Electrical Specifications, (continued)
Parameter
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Units
Input Frequency
900
1900
2200
2700
3000
3500
3900
MHz
Modulation Deviation from CW Response
CDMA2000 3 Carriers, 9 Channels
0.15
0.12
0.15
0.18
0.25
0.3
0.35
dB
CDMA2000 1 Carrier, 9 Channels
0.1
0.08
0.1
0.14
0.2
0.25
0.3
dB
IS95 Reverse Link
0.05
0.05
0.1
0.1
0.1
0.15
0.2
dB
WCDMA 1 Carrier
0.1
0.14
0.12
0.18
0.2
0.3
0.3
dB
WCDMA 4 Carrier
0.2
0.22
0.24
0.24
0.3
0.4
0.4
dB
36.5
37.3
37.8
39.3
40.5
43.5
47.5
mV/dBm
-71.5
-70.3
-69
-65
-62
8
Logarithmic Slope
Logarithmic Intercept
Parameter
RMS Conformance Error
Conditions
Min.
-57
Typ.
-53
Max.
dBm
Units
f ≤2.7 GHz
±0.6
dB
Pins INN, INP, AC coupled, Differential drive
200
Ω
RF Input (INP, INN) Interface
Input Resistance
Logout Interface (RMSOUT)
Available Output Range
RLOAD ≥ 200 Ω to ground
0.4
3.2
Detection mode, f=900 MHz,Pin= -58 dBm
Absolute Voltagel High End of Range
Detection mode, f=900 MHz,Pin= +15 dBm
3.12
V
RMSOUT held at Vs/2, to 1% change
8/0.4
mA
Source/Sink Current
0.5
V
Absolute Voltage Low End of Range
V
Rise Time, 10% to 90%
0.2V to 1.9V, CINT=0
10
ns
Fall Time, 90% to 10%
1.9V to 0.2V. CINT=0
500
ns
VSET Interface (VSET)
Nominal Input Voltage Range
To ±1 dB error
0.4
Input Resistance
3.2
54
V
kΩ
Voltage Reference (VREF)
Output Voltage
Temperature Sensitivity
Output Resistance
TA = 25°C
2
V
-40°C ≤ TA ≤ +85°C
mV/°C
Small Signal at 100 kHz
8
RMS Target Interface (VTGT)
Ω
2
Nominal Input Voltage Range
0.3
POWER DETECTORS - SMT
Logarithmic Slope and Intercept
V
4.2
V
Power Supply Interface (Vdd)
Supply Voltage
Quiescent Current
4.5
5.5
V
Pin= -70 dBm
65
mA
Pin= +15 dBm
85
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 33
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
RMSOUT vs. Pin with
Different Modulations @ 900 MHz
RMSOUT Error vs. Pin with
Different Modulations @ 900 MHz
4
4
Ideal
CW
CDMA2000 3 carriers 9 chn
CDMA2000 single carrier 9 chn
IS95 reverse link
WCDMA 4 carriers
WCDMA single carrier
2
2
1.5
0
-1
1
-2
-3
-4
-60
-50
-40
-30
-20
-10
0
10
-70
-60
-50
-40
INPUT POWER (dBm)
RMSOUT vs. Pin with
Different Modulations @ 3000 MHz
3
Ideal
CW
CDMA2000 3 carriers 9 chn
CDMA2000 single carrier 9 chn
IS95 reverse link
WCDMA 4 carriers
WCDMA single carrier
0
10
2.5
2
1.5
1
0
-1
1
-2
0.5
-3
-60
-50
-40
-30
-20
CW
CDMA2000 3 carriers 9 chn
CDMA2000 single carrier 9 chn
IS95 reverse link
WCDMA 4 carriers
WCDMA single carrier
2
ERROR (dB)
3
-10
0
-4
-60
10
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
INPUT POWER (dBm)
RMSOUT Error vs. Pin & Frequency
4
4
100MHz
900MHz
1900MHz
2700MHz
3000MHz
3500MHz
3900MHz
3
2.5
2
2
1.5
1
0
-1
1
-2
0.5
-3
0
-60
-50
-40
100Mhz
900MHz
1900MHz
2700MHz
3000MHz
3500MHz
3900MHz
3
ERROR (dB)
3.5
RMSOUT (V)
-10
4
3.5
-70
-20
RMSOUT Error vs. Pin with
Different Modulations @ 3000 MHz
4
0
-70
-30
INPUT POWER (dBm)
RMSOUT vs. Pin & Frequency
-30
-20
-10
INPUT POWER (dBm)
8 - 34
1
0.5
0
-70
RMSOUT (V)
POWER DETECTORS - SMT
8
RMSOUT (V)
3
2.5
CW
CDMA2000 3 carriers 9 Chn
CDMA2000 single carrier 9 Chn
IS95 reverse link
WCDMA 4 carreiers
WCDMA single carrier
3
ERROR (dB)
3.5
0
10
20
-4
-70
-60
-50
-40
-30
-20
-10
0
INPUT POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10
20
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
+25C
+85C
-45C
2
3
0
1
0
-70
-60
-50
-40
-30
-20
-10
0
4
+25C
+85C
-45C
2
0
-2
1
-2
-4
0
10
-70
-4
-60
-50
INPUT POWER (dBm)
+25C
+85C
-45C
4
2
3
1
0
-50
-40
-30
-20
-10
0
+25C
+85C
-45C
-2
1
-2
-4
0
-60
-4
-50
-40
3
0
-10
INPUT POWER (dBm)
-20
-10
0
10
0
10
4
+25C
+85C
-45C
2
2
0
-2
1
-2
-4
0
-60
ERROR (dB)
1
RMSOUT(V)
2
ERROR (dB)
RMSOUT(V)
4
0
-20
-30
8
RMSOUT & Error vs. Pin @ 3500 MHz [1]
4
2
-30
2
INPUT POWER (dBm)
+25C
+85C
-45C
-40
10
0
10
4
-50
0
2
RMSOUT & Error vs. Pin @ 3000 MHz [1]
-60
-10
4
INPUT POWER (dBm)
3
-20
ERROR (dB)
0
ERROR (dB)
RMSOUT(V)
4
2
-60
-30
RMSOUT & Error vs. Pin @ 2700 MHz [1]
RMSOUT(V)
4
-70
-40
INPUT POWER (dBm)
RMSOUT & Error vs. Pin @ 2200 MHz [1]
3
2
ERROR (dB)
2
ERROR (dB)
RMSOUT (V)
3
4
RMSOUT (V)
4
RMSOUT & Error vs. Pin @ 1900 MHz [1]
4
POWER DETECTORS - SMT
RMSOUT & Error vs. Pin @ 900 MHz [1]
-4
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
[1] CW input waveform.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 35
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
8
4
4
3
2
2
0
ERROR (dB)
RMSOUT(V)
RMSOUT & Error vs. Pin @ 3900 MHz [1]
-2
1
-4
0
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Slope vs. Frequency & Supply Voltage
Slope vs. Frequency
60
60
55
55
4.5V
5.0V
5.5V
50
SLOPE (mV/dB)
SLOPE (mV/dB)
POWER DETECTORS - SMT
+25C
+85C
-45C
45
40
35
+25C
+85C
-45C
50
45
40
35
30
30
0
500
1000
1500
2000
2500
3000
3500
0
4000
500
1000
Intercept vs. Frequency & Supply Voltage
2000
2500
3000
3500
4000
3000
3500
4000
Intercept vs. Frequency
-40
-40
-45
-45
4.5V
5.0V
5.5V
-50
INTERCEPT (dBm)
INTERCEPT (dBm)
1500
FREQUENCY (MHz)
FREQUENCY (MHz)
-55
-60
-65
-55
-60
-65
-70
-70
-75
-75
-80
+25C
+85C
-45C
-50
-80
0
500
1000
1500
2000
2500
FREQUENCY (MHz)
3000
3500
4000
0
500
1000
1500
2000
2500
FREQUENCY (MHz)
[1] CW input waveform.
8 - 36
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Output Response to RF Burst
Input @ 1900 MHz, CINT (C17) = Open
Output Response to RF Burst
Input @ 1900 MHz, CINT (C17) = 0.1 μF
6
VOUT (V)
-2
0 dBm
-4
2
-6
-20 dBm
-8
-30 dBm
-10
1
0
-2
3
+5 dBm
-4
0 dBm
2
-6
-10 dBm
-8
-20 dBm
1
-10
-30 dBm
-12
0
1
2
3
4
5
6
7
8
9
-14
0
10
0
1
2
3
4
TIME (us)
5
6
7
8
TIME (us)
S11
0.
5
2 .0
1.8
0 .6
1.6
1.4
1.2
0.9
0.8
0.7
1.0
Input Impedance vs
Frequency, 100 MHz - 3.9 GHz [1]
0.
4
3.
0
3.9 GHz
0.3
4.0
5.0
6.0
0.2
3.5 GHz
8.0
10
0.1
10
5.0
4.0
3.0
2.0
1.0
0.9
0.8
0.7
0.6
0.4
0.3
0.2
0
0.5
0.1 GHz
2.7 GHz
1.9 GHz
20
0.1
20
0.1
8
-12
-14
0
RF BURST ENABLE (V)
+5 dBm
2
4
RF BURST ENABLE (V)
0
-10 dBm
4
RF BURST ENABLED
2
VOUT (V)
RF BURST ENABLED
4
3
6
5
4
0.9 GHz
8.0
10
10
6.0
2.2 GHz
5.0
0.2
9
POWER DETECTORS - SMT
5
4.0
3.
0
0. 3
4
1 .6
1.4
1.2
1.0
0.9
0.8
0.7
0 .6
1.8
0.
2 .0
5
0.
[1] Reference plane at J1 connector on evaluation board.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 37
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Absolute Maximum Ratings
POWER DETECTORS - SMT
8
Supply Voltage
5.6V
RF Input Power
20 dBm
Equivalent Voltage
2.25 Vrms
Channel / Junction Temperature
125 °C
Continuous Pdiss (T = 85°C)
(Derate 22.72 mW/°C above 85°C)
0.91 Watts
Thermal Resistance (Rth)
(junction to ground paddle)
44.02 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC610LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC610LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H610
XXXX
[2]
H610
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
8 - 38
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Pin Descriptions
Function
Description
1, 6, 8, 11, 21
Vcc
Bias Supply. Connect supply voltage to these pins
with appropriate filtering.
2, 5, 12, 13, 16,
18, 24
GND
Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
3, 4
IN+, IN-
RF Input pins. Connect RF to IN+ and IN- through a
1:1 balun.
7
ENX
Disable pin. Connect to GND for normal operation.
Applying voltage V>0.8 Vdd will initiate power saving
mode.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8
POWER DETECTORS - SMT
Pin Number
8 - 39
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Pin Descriptions (Continued)
POWER DETECTORS - SMT
8
8 - 40
Pin Number
Function
Description
9, 10
COFS
Input high pass filter capacitor. Connect to common
via a capacitor to determine 3 dB point of input
signal high-pass filter.
14
VSET
VSET input. Short this pin to RMSOUT for normal
operation. Use a resistor between RMSOUT and
VSET to increase the logarithmic slope.
15
RMSOUT
Logarithmic output that converts the input power
to a DC level. Short this pin to VSET for normal
operation.
16
IPWR
Ground for proper operation
17
CINT
Connection for ground referenced loop filter
integration capacitor.
19
VTGT
This voltage input changes the logarithmic intercept
point. Use of lower target voltage reduces error for
complex signals with large crest factors. Normally
connected to VREF.
20
VREF
Reference voltage output.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Pin Descriptions (Continued)
Function
Description
22, 23
CPB, CPA
Temperature compensation pins. Leave both pins
floating for normal operation.
Interface Schematic
Application & Evaluation PCB Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8
POWER DETECTORS - SMT
Pin Number
8 - 41
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Evaluation PCB
POWER DETECTORS - SMT
8
List of Materials for Evaluation PCB 118147 [1]
Item
Description
J1 - J2
PC Mount SMA connector
J3 - J7
DC Pins
C1 - C3
1 nF Capacitor, 0402 Pkg.
C4, C6, C8, C11, C17
0.1 μF Capacitor, 0402 Pkg.
C5, C7, C9, C12
100 PF Capacitor, 0402 Pkg.
C10
1000 PF Capacitor, 0402 Pkg.
R25
68 Ω Resistor, 0402 Pkg.
R11, R24
0 Ω Resistor, 0402 Pkg.
R4
10k Ω Resistor, 0402 Pkg.
T1
1:1 Balun, M/A-COM ETC1-1-13
U1
HMC610LP4 / HMC610LP4E
Logarithmic Detector / Controller
PCB [2]
118144 Eval Board
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
8 - 42
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC610LP4 / 610LP4E
v02.0607
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
Notes
POWER DETECTORS - SMT
8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 43