HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 1/12 MICROELECTRONICS CORP. H78XX Series H78XX Series Pin Assignment 3-Lead Plastic TO-252 Package Code: J Pin 1: VIN Pin 2 & Tab: GND Pin 3: VOUT Tab 3-TERMINAL POSITIVE VOLTAGE REGULATORS Description 1 The H78XX series can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each employs internal current limiting, thermal shut-down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. 3 2 Tab 3-Lead Plastic TO-251 Package Code: I Pin 1: VIN Pin 2 & Tab: GND Pin 3: VOUT 1 3 2 Features 3-Lead Plastic SOT-82 Package Code: NE Pin 1: VIN Pin 2: GND Pin 3: VOUT • Output Current In Excess of 1A • Output Voltages of 5V, 6V, 8V, 9V, 12V • Internal Short-Circuit Current Limiting & Thermal Overload Protection • Guaranteed In Extended Temperature Range Absolute Maximum Ratings (TA=25°C) Tab Characteristic Symbol Rating Unit Input Voltage Power Dissipation Operating Temperature Storage Temperature Junction Temperature VIN PD Topr Tstg Tj 40 Internally limited (Note) -30 to 85 -55 to 150 150 V 1 2 3 3-Lead Plastic TO-220AB Package Code: E Pin 1: VIN Pin 2 & Tab: GND Pin 3: VOUT o C C o C o 1 2 3 Note: (1)TA=25oC, TO-251: 1W, TO-252: 1W, SOT-82: 2.1W, TO-220AB: 2.7W (2)TC=25oC, All package: 10W Thermal Data Characteristic Thermal Resistance Junction-Case Thermal Resistance Junction-Ambient Symbol Rth(j-c) Rth(j-a) TO-252 12.5 125 TO-251 12.5 125 SOT-82 12.5 60 TO-220AB 12.5 47 Unit C/W o C/W o Schematic Diagram & Equivalent Circuit Schematic Diagram Equivalent Circuit Input Series Pass Element 1 Current Generator Starting Circuit Reference Voltage Output VIN 3 SOA Protection Error Amplifier Thermal Protection VOUT GND 2 H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 2/12 MICROELECTRONICS CORP. H7805 Series Electrical Characteristics VIN=10V, IOUT=500mA, CIN=0.33uF, COUT=0.1uF, 0°C≤TJ≤125°C (unless otherwise specified) Symbol Parameter Conditions Min Typ Max 4.85 5 5.15 4.85 5 5.15 TJ=25°C, 7V≤VIN≤25V - 3 50 TJ=25°C, 8V≤VIN≤12V - 1 25 TJ=25°C, 5mA≤IOUT≤1A - 15 100 TJ=25°C, 250mA≤IOUT≤750mA - 5 50 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 7V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation H7805AJ/AI/ANE/AE Units V mV mV IB Quiescent Current IOUT=5mA, TJ=25°C - 3.9 8 ∆IB Quiescent Current Change IOUT=500mA, 7V≤VIN≤25V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=10V, TJ=25oC - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - 50 - uV/VO RR Ripple Rejection 10V≤VIN≤18V, f=120Hz, IOUT=50mA, TJ=25oC 57 73 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 0.6 mV/°C ∆VO/∆T Symbol o o Parameter Conditions Min Typ Max 4.75 5 5.25 4.75 5 5.25 TJ=25°C, 7V≤VIN≤25V - 3 100 TJ=25°C, 8V≤VIN≤12V - 1 50 TJ=25°C, 5mA≤IOUT≤1A - 15 100 TJ=25°C, 250mA≤IOUT≤750mA - 5 50 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 7V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation H7805BJ/BI/BNE/BE mA mA Units V mV mV IB Quiescent Current IOUT=5mA, TJ=25°C - 3.9 8 ∆IB Quiescent Current Change IOUT=500mA, 7V≤VIN≤25V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=10V, TJ=25oC - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - 50 - uV/VO RR Ripple Rejection 10V≤VIN≤18V, f=120Hz, IOUT=50mA, TJ=25oC 57 73 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 0.6 mV/°C ∆VO/∆T o o H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE mA mA HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 3/12 MICROELECTRONICS CORP. H7806 Series Electrical Characteristics VIN=11V, IOUT=500mA, CIN=0.33uF, COUT=0.1uF, 0°C≤TJ≤125°C (unless otherwise specified) Symbol Parameter H7806AJ/AI/ANE/AE Conditions Min Typ Max 5.82 6 6.18 5.82 6 6.18 TJ=25°C, 8V≤VIN≤25V - 3 60 TJ=25°C, 9V≤VIN≤13V - 1 25 TJ=25°C, 5mA≤IOUT≤1A - 15 100 TJ=25°C, 250mA≤IOUT≤750mA - 5 50 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 8V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation Units V mV mV IB Quiescent Current IOUT=5mA, TJ=25°C - 3.9 8 ∆IB Quiescent Current Change IOUT=500mA, 9V≤VIN≤25V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=11V, TJ=25oC - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 55 uV/VO RR Ripple Rejection 11V≤VIN≤19V, f=120Hz, IOUT=50mA, TJ=25oC 56 72 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current VIN=45V, TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 0.7 mV/°C ∆VO/∆T Symbol o o Parameter H7806BJ/BI/BNE/BE Conditions Min Typ Max 5.7 6 6.3 5.7 6 6.3 TJ=25°C, 8V≤VIN≤25V - 3 120 TJ=25°C, 9V≤VIN≤13V - 1 60 TJ=25°C, 5mA≤IOUT≤1A - 15 120 TJ=25°C, 250mA≤IOUT≤750mA - 5 60 - 3.9 8 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 8V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation mA mA Units V mV mV IB Quiescent Current IOUT=5mA, TJ=25°C ∆IB Quiescent Current Change IOUT=500mA, 9V≤VIN≤25V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=11V, TJ=25 C - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 55 uV/VO RR Ripple Rejection 11V≤VIN≤19V, f=120Hz, IOUT=50mA, TJ=25oC 56 72 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current VIN=45V, TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 0.7 mV/°C ∆VO/∆T o o o H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE mA mA HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 4/12 MICROELECTRONICS CORP. H7808 Series Electrical Characteristics VIN=14V, IOUT=500mA, CIN=0.33uF, COUT=0.1uF, 0°C≤TJ≤125°C (unless otherwise specified) Symbol Parameter H7808AJ/AI/ANE/AE Conditions Min Typ Max 7.76 8 8.24 7.76 8 8.24 TJ=25°C, 10.5V≤VIN≤25V - 3 80 TJ=25°C, 11V≤VIN≤17V - 1 40 TJ=25°C, 5mA≤IOUT≤1A - 15 100 TJ=25°C, 250mA≤IOUT≤750mA - 5 50 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 10V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation Units V mV mV IB Quiescent Current IOUT=5mA, Tj=25°C - 3.9 8 ∆IB Quiescent Current Change IOUT=500mA, 10.5V≤VIN≤25V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=14V, TJ=25oC - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 70 uV/VO RR Ripple Rejection 14V≤VIN≤21.5V, f=120Hz, IOUT=50mA, TJ=25oC 53 69 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 1 mV/°C ∆VO/∆T Symbol o o Parameter H7808BJ/BI/BNE/BE Conditions Min Typ Max 7.6 8 8.4 7.6 8 8.4 TJ=25°C, 10.5V≤VIN≤25V - 3 160 TJ=25°C, 11V≤VIN≤17V - 1 80 TJ=25°C, 5mA≤IOUT≤1A - 15 160 TJ=25°C, 250mA≤IOUT≤750mA - 5 80 - 3.9 8 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 10V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation mA mA Units V mV mV IB Quiescent Current IOUT=5mA, TJ=25°C ∆IB Quiescent Current Change IOUT=500mA, 10.5V≤VIN≤25V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=14V, TJ=25 C - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 70 uV/VO RR Ripple Rejection 14V≤VIN≤21.5V, f=120Hz, IOUT=50mA, TJ=25oC 53 69 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 1 mV/°C ∆VO/∆T o o o H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE mA mA HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 5/12 MICROELECTRONICS CORP. H7809 Series Electrical Characteristics VIN=15V, IOUT=500mA, CIN=0.33uF, COUT=0.1uF, 0°C≤TJ≤125°C (unless otherwise specified) Symbol Parameter H7809AJ/AI/ANE/AE Conditions Min Typ Max 8.73 9 9.27 8.73 9 9.27 TJ=25°C, 11.5V≤VIN≤25V - 3 90 TJ=25°C, 13V≤VIN≤19V - 1 45 TJ=25°C, 5mA≤IOUT≤1A - 15 100 TJ=25°C, 250mA≤IOUT≤750mA - 5 50 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 11V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation Units V mV mV IB Quiescent Current IOUT=5mA, Tj=25°C - 3.9 8 ∆IB Quiescent Current Change IOUT=500mA, 11.5V≤VIN≤26V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=15V, TJ=25oC - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 75 uV/VO RR Ripple Rejection 15V≤VIN≤22.5V, f=120Hz, IOUT=50mA, TJ=25oC 51 67 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 1.1 mV/°C ∆VO/∆T Symbol o o Parameter H7809BJ/BI/BNE/BE Conditions Min Typ Max 8.55 9 9.45 8.55 9 9.45 TJ=25°C, 11.5V≤VIN≤25V - 3 180 TJ=25°C, 13V≤VIN≤19V - 1 90 TJ=25°C, 5mA≤IOUT≤1A - 15 180 TJ=25°C, 250mA≤IOUT≤750mA - 5 90 - 3.9 8 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 11V≤VIN≤25V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation mA mA Units V mV mV IB Quiescent Current IOUT=5mA, TJ=25°C ∆IB Quiescent Current Change IOUT=500mA, 11.5V≤VIN≤26V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=15V, TJ=25 C - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 75 uV/VO RR Ripple Rejection 15V≤VIN≤22.5V, f=120Hz, IOUT=50mA, TJ=25oC 51 67 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 17 - mΩ ISC Short Circuit Current TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 1.1 mV/°C ∆VO/∆T o o o H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE mA mA HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 6/12 MICROELECTRONICS CORP. H7812 Series Electrical Characteristics VIN=19V, IOUT=500mA, CIN=0.33uF, COUT=0.1uF, 0°C≤TJ≤125°C (unless otherwise specified) Symbol Parameter H7812AJ/AI/ANE/AE Conditions Min Typ Max 11.64 12 12.36 11.64 12 12.36 TJ=25°C, 14.5V≤VIN≤30V - 10 120 TJ=25°C, 16V≤VIN≤22V - 3 60 TJ=25°C, 5mA≤IOUT≤1A - 12 100 TJ=25°C, 250mA≤IOUT≤750mA - 4 60 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 14V≤VIN≤30V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation Units V mV mV IB Quiescent Current IOUT=5mA, Tj=25°C - 3.9 8 ∆IB Quiescent Current Change IOUT=500mA, 14.5V≤VIN≤30V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=19V, TJ=25oC - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 90 uV/VO RR Ripple Rejection 19V≤VIN≤25V, f=120Hz, IOUT=50mA, TJ=25oC 50 66 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 18 - mΩ ISC Short Circuit Current TJ=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 1.6 mV/°C ∆VO/∆T Symbol o o Parameter H7812BJ/BI/BNE/BE Conditions Min Typ Max 11.4 12 12.6 11.4 12 12.6 TJ=25°C, 14.5V≤VIN≤30V - 10 240 TJ=25°C, 16V≤VIN≤22V - 3 120 TJ=25°C, 5mA≤IOUT≤1A - 12 240 TJ=25°C, 250mA≤IOUT≤750mA - 4 120 - 3.9 8 TJ=25°C, IOUT=500mA VO Output Voltage 5mA≤IOUT≤1A 14V≤VIN≤30V, POUT≤15W ∆VO Line Regulation ∆VO Load Regulation mA mA Units V mV mV IB Quiescent Current IOUT=5mA, TJ=25°C ∆IB Quiescent Current Change IOUT=500mA, 14.5V≤VIN≤30V, TJ=25oC - - 1.3 5mA≤IOUT≤1A, VIN=19V, TJ=25 C - - 0.5 eN Output Noise Voltage B=10Hz~100KHz, IOUT=50mA, TJ=25°C - - 90 uV/VO RR Ripple Rejection 19V≤VIN≤25V, f=120Hz, IOUT=50mA, TJ=25oC 50 66 - dB VD Dropout Voltage TJ=25°C, IOUT=1A - 2 2.5 V RO Output Resistance f=1KHz - 18 - mΩ ISC Short Circuit Current Tj=25°C - 2.3 2.8 A Output Voltage Drift 0 C≤TJ≤125 C - - 1.6 mV/°C ∆VO/∆T o o o H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE mA mA HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 7/12 MICROELECTRONICS CORP. Test Circuits VIN 1 3 H78XX Series VIN 1 CIN 2 CIN VOUT COUT 0.33uF H78XX Series 2 0.33uF VOUT 3 VIN 1 - + RL H7805 Series 3 VOUT 270pF 2 + - 0.1uF RL DC 9V VOUT 100 0V DC Parameter Load Regulation Ripple Rejection Application Circuits Constant Current Regulator VIN 1 Circuit for Increasing Output Voltage VOUT 3 H78XX Series 2 VIN R1 0.33uF 0.33uF 1 H78XX Series 2 IB VOUT 3 R1 IR1 0.1uF 10uF 0.1uF R2 VOUT=VOUT(IC)+VZ 10uF VOUT=VOUT(IC)(1+R2/R1)+R2*IB I1=VOUT(IC)/R1 Adjustable Output Regulator High Output Current with Short-circuit Protection VIN VIN 1 H78XX Series Rsc VOUT 3 R1 Q1 Q2 1 0.1uF 10uF 0.33uF IB 2 + R1 R2 VOUT=VOUT(IC)(1+R2/R1) H78XX Series VOUT 3 2 0.33uF 0.1uF 10uF R1≤VBE1/IB(max) RSC=VBE2/ISC, ISC: Short-Circuit Current H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 8/12 MICROELECTRONICS CORP. Characteristics Curve Current Cut-off Grid Voltage Ripple Rejection 70 Vout 50 Output Voltage (V) Ripple Rejection (dB).. 60 40 30 20 Vin=Vout(ic)+5V o Tj=25 C Vin=(4.5+Vout(ic))VDC+3.5Vrms Iout=50mA o Tj=25 C 10 0 10 100 1000 10000 100000 0 1000000 0.5 1 Frequency (Hz) 2 2.5 3 Output Voltage as a Function of Junction Temperature Worst Case Power Dissipation 2500 Vin=Vout(ic)+5V Iout=5mA Output Voltage (V) 2000 Output Current (mA) 1.5 Output Current (A) 1500 1000 o With 72 C/W Heat Sink Heat Sink Size: 50*50*2 mm 500 Free Air 0 0 5 10 15 20 25 30 35 0 50 100 150 200 o Junction Temperature ( C) Differential (V) Vinput-Voutput Voltage(V) Load Transient Response Voltage Range 2.5 1.0 2 0.5 0 Vout Voutput (V) 1.5 Load Current (A) Output Voltage Deviion (V).. 3 1 0.5 0 Vin=Vout(ic)+5V o Tj =25 C -0.5 Iout=50mA -1 0 5 10 15 20 25 30 35 40 45 50 Time (us) H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE 0 5 10 15 20 25 30 35 Vinput-Voutput (V) HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 9/12 MICROELECTRONICS CORP. TO-252 Dimension Marking: M A a1 Pb Free Mark Pb-Free: " . " (Note) H Normal: None F J Product Series (05,06,08,09,12) 7 8 C Date Code Control Code Note: Green label is used for pb-free packing G Pin Style: 1.Input 2.Ground 3.Output 2 1 N 3 H a5 Min. 6.35 4.80 1.30 5.40 2.20 0.40 2.20 0.90 0.40 0.65 Max. 6.80 5.50 1.70 6.25 3.00 0.90 2.40 1.50 0.65 *2.30 1.05 *: Typical, Unit: mm a1 a2 L Material: • Lead solder plating: Sn60/Pb40 (Normal), Sn/3.0Ag/0.5Cu or Pure-Tin (Pb-free) • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 DIM A C F G H L M N a1 a2 a5 3-Lead TO-252 Plastic Surface Mount Package HSMC Package Code: J Marking: A B C D a1 M F Pb Free Mark Pb-Free: " . " (Note) H Normal: None a1 y1 Date Code y1 N a2 a1 y2 Material: • Lead solder plating: Sn60/Pb40 (Normal), Sn/3.0Ag/0.5Cu or Pure-Tin (Pb-free) • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 O a2 Control Code Pin Style: 1.Input 2.Ground 3.Output y1 H L (05,06,08,09,12) Note: Green label is used for pb-free packing GI K Product Series 7 8 E J J y2 3-Lead TO-252 Plastic Surface Mount Package HSMC Package Code: J H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE DIM A B C D E F G H I J K L M N O a1 a2 y1 y2 Min. 6.40 5.04 0.40 0.50 5.90 2.50 9.20 0.60 0.66 2.20 0.70 0.82 0.40 2.10 - Max. 6.80 6.00 5.64 *4.34 0.80 0.90 6.30 2.90 9.80 1.00 0.96 0.86 2.40 1.10 1.22 0.60 2.50 5o 3o *: Typical, Unit: mm HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 10/12 MICROELECTRONICS CORP. TO-251 Dimension A Marking: M a1 F Tab Pb Free Mark Pb-Free: " . " (Note) H Normal: None C I Product Series (05,06,08,09,12) 7 8 Date Code G Control Code Note: Green label is used for pb-free packing 1 2 3 Pin Style: 1.Input 2.Ground 3.Output L K H1 a1 Material: • Lead solder plating: Sn60/Pb40 (Normal), Sn/3.0Ag/0.5Cu or Pure-Tin (Pb-free) • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 DIM A C F G H1 K K1 L M a1 a2 Min. 6.35 4.80 1.30 5.40 6.75 0.50 0.40 0.90 2.20 0.40 - Max. 6.80 5.50 1.70 6.25 8.00 0.90 0.90 1.50 2.40 0.65 *2.30 *: Typical, Unit: mm K1 a2 3-Lead TO-251 Plastic Package HSMC Package Code: I a2 A B C D a1 Marking: M Pb Free Mark F Pb-Free: " . " (Note) H Normal: None a1 y1 I Product Series (05,06,08,09,12) 7 8 E G y1 y1 H1 K1 a2 y2 Pin Style: 1.Input 2.Ground 3.Output Material: • Lead solder plating: Sn60/Pb40 (Normal), Sn/3.0Ag/0.5Cu or Pure-Tin (Pb-free) • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 J a2 Control Code Note: Green label is used for pb-free packing H K Date Code I a1 y2 3-Lead TO-251 Plastic Package HSMC Package Code: I H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE DIM A B C D E F G H H1 I J K K1 M a1 a2 y1 y2 Min. 6.40 5.04 0.40 0.50 5.90 2.20 0.40 2.10 - Max. 6.80 6.00 5.64 *4.34 0.80 0.90 6.30 *1.80 *9.30 *16.10 *0.80 0.96 *0.76 2.40 0.60 2.50 5o 3o *: Typical, Unit: mm HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 11/12 MICROELECTRONICS CORP. SOT-82 Dimension A B DIM A B C D E F G H I J K L M N a1 r1 r2 r3 Marking: r1 Pb Free Mark C Pb-Free: " . " (Note) H Normal: None r2 Product Series NE (05,06,08,09,12) 78 D L Date Code 1 2 Control Code H 3 Note: Green label is used for pb-free packing a1 F a1 Pin Style: 1.Input 2.Ground 3.Output I Material: • Lead solder plating: Sn60/Pb40 (Normal), Sn/3.0Ag/0.5Cu or Pure-Tin (Pb-free) • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 E G M J K 3-Lead SOT-82 Plastic Package HSMC Package Code: NE N a1 r3 a1 Min. 7.57 5.44 3.78 10.88 10.25 1.16 4.52 2.49 1.10 1.22 - Max. 7.67 5.54 3.98 10.98 10.75 *1.27 *0.76 1.26 *0.76 4.62 2.59 1.20 *0.60 1.32 *3o φ3.10 R1.70 R0.20 *: Typical, Unit: mm TO-220AB Dimension DIM A B C D E F G H I J K L M N O P Marking: A F B Pb Free Mark Pb-Free: " . " (Note) Normal: None H E C D E Product Series (05,06,08,09,12) 78 Date Code H M I K Control Code Note: Green label is used for pb-free packing 3 G N 2 1 Tab O P J L Pin Style: 1.Input 2.Ground 3.Output Material: • Lead solder plating: Sn60/Pb40 (Normal), Sn/3.0Ag/0.5Cu or Pure-Tin (Pb-free) • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Min. 5.58 8.38 4.40 1.15 0.35 2.03 9.66 3.00 0.75 2.54 1.14 12.70 14.48 Max. 7.49 8.90 4.70 1.39 0.60 2.92 10.28 *16.25 *3.83 4.00 0.95 3.42 1.40 *2.54 14.27 15.87 *: Typical, Unit: mm 3-Lead TO-220AB Plastic Package HSMC Package Code: E Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC. • HSMC reserves the right to make changes to its products without notice. • HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: • Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C. Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454 • Factory 1: No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C Tel: 886-3-5983621~5 Fax: 886-3-5982931 H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE HSMC Product Specification HI-SINCERITY Spec. No. : IC200405 Issued Date : 2004.04.01 Revised Date : 2006.01.19 Page No. : 12/12 MICROELECTRONICS CORP. Soldering Methods for HSMC’s Products 1. Storage environment: Temperature=10oC~35oC Humidity=65%±15% 2. Reflow soldering of surface-mount devices Figure 1: Temperature profile tP Critical Zone TL to TP TP Ramp-up TL tL Temperature Tsmax Tsmin tS Preheat Ramp-down 25 t 25oC to Peak Time Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly <3 C/sec <3oC/sec - Temperature Min (Tsmin) 100oC 150oC - Temperature Max (Tsmax) 150oC 200oC 60~120 sec 60~180 sec <3oC/sec <3oC/sec 183oC 217oC Average ramp-up rate (TL to TP) o Preheat - Time (min to max) (ts) Tsmax to TL - Ramp-up Rate Time maintained above: - Temperature (TL) - Time (tL) 60~150 sec 260oC +0/-5oC 10~30 sec 20~40 sec <6oC/sec <6oC/sec <6 minutes <8 minutes Peak temperature Dipping time Pb devices. 245 C ±5 C 10sec ±1sec Pb-Free devices. 260 C ±5 C 10sec ±1sec Time within 5oC of actual Peak Temperature (tP) Ramp-down Rate Time 25oC to Peak Temperature o 60~150 sec 240 C +0/-5 C Peak Temperature (TP) o 3. Flow (wave) soldering (solder dipping) Products o H78XXAJ / BJ, H78XXAI / BI, H78XXANE / BNE, H78XXAE / BE o o o HSMC Product Specification