Specification No. Date SPECIFICATIONS Φ White LED LAMP 5Φ MODEL : HLWW- L51A Designed by Checked by Approved by ROITHNER LASERTECHNIK VIENNA AUSTRIA www.roithner-laser.com [email protected] MODEL : HLWW-L51A 2. Application 1. Features 1-1. InGaN Blue Chip 2-1. LED Display / Traffic Guiding Signal 1-2. 5mm all epoxy resin mold type 2-2. Illumination device 1-3. Colorless Cylinder type LED lamp 2-3. Back Light for Signboard 1-4. Ultra luminous intensity 1-4. Ultra luminous intensity 3. Absolute maximum ratings and Characteristics 3 - 1 Absolute maximum ratings Ta=25℃ Symbols Items Ratings Units Forward Current IF 30 mA Pulse Forward Current *1 IFP 50 mA Power Dissipation PD 75 mW Reverse Voltage VR 5 Vr Operating Temperature Topr -20 ~ +75 ℃ Storage Temperature Tstg -30 ~ +100 ℃ Soldering Temperature *2 TSOL 260±5℃ ℃ *1) Pulse Width = 100 μsec, Duty ≤ 10% *2 ) 5sec at location 3.0mm away from the base of the epoxy bulb 3 - 2 Optical and Electrical Characteristics Item Symbol Condition Ta=25℃ Min Typ Max Unit Forward Voltage VF IF=20[mA] - 3.4 4.0 V Reverse Current IR VR=5[V] - - 10 ㎂ Luminous Intensity IV IF=20[mA] 3600 4200 - mcd λd IF=20[mA] Spectral Linewidth Δλ IF=20[mA] - nm Viewing Angle 2Θ1/2 IF=20[mA] Chromaticity Coordinates Data subject to change. X=0.30 Y=0.31 - 17 15 deg MODEL : HLWW-L51A 4. Dimension 2.54 Max.2.35 Not Soldered 5.45±0.2 Φ5.9±0.2 1.0±0.2 8.6±0.2 Φ5.0±0.2 Min.25.4 2-Max.0.7 2-0.5±0.1 0.5±0.1 1 1 Min.1.0 (2.54) 2 : ANODE 2 : CATHODE General TOL.:±0.3 5. Bin Grading for Chromaticity Coordinates Chromaticity Coordinates RANK A B C D *Tolerance Data subject to change. X 0.220 0.220 0.260 0.260 Y 0.220 0.280 0.310 0.250 X 0.260 0.260 0.290 0.290 Y 0.250 0.310 0.330 0.270 X 0.290 0.290 0.320 0.320 Y 0.270 0.330 0.350 0.290 X 0.320 0.320 0.360 0.360 Y 0.290 0.350 0.380 0.320 X±0.02 Y±0.02 MODEL : HLWW-L51A 6. Typical Electro-optical characteristics curve ■Forward Voltage vs. Forward Current 100 Forward Current[mA] Relative Luminous Intensity[a.u.] ■ Lead Temperature vs. Relative Luminosity 1 10 0.1 -20 0 20 40 60 80 1 1.0 100 2.0 Spectrum Radius 5.0 40 80 30 Forward Current[mA] RELATIVE RESPONSE 100%=1,642e-001 4.0 ■Ambient Temperature vs. Forward Current ■ Luminous Spectrum 100 3.0 Forward Voltage[V] Lead Temperature[℃] 60 40 20 0 400 500 600 700 20 10 0 -20 nm 0 40 30 - 30 - 60 60 - 90 1 Data subject to change. 0.5 0 60 Ambient Temperature[℃] 0 ■ Spatial Distribution 20 0.5 1 90 80 MODEL : HLWW-L51A 7. Inspection Standards 7 - 1 In production line, 100% inspection for electro-optical characteristics should be done on following 3 items. - VF , IR , Iv 7 - 2 Outgoing inspection be done to the standards as below. - MIL-STD-104D, S-3, AQL 1.0% - Items: VF, IR, Iv, λp 8. Packing Standards In one vinyl pack, 200 LEDs are inserted. Or user’s request. In one small box, 10 packs(total 2000 LEDs) are inserted. Or user’s request. 9. Caution on usage 9 - 1 Be careful never to exceed , even momentarily, the absolute maximum ratings specified in the data sheet. 9 - 2 We will not be held responsible for any damage to the user that may result from accidents or any other reasons during operation of the user such as use in excess of the absolute maximum ratings, or not keeping the matters that demand special attention. 9 - 3 Store and use where there is no corrosive gas. 9 - 4 The bending or cutting of the lead should be done in room temperature and no force applied on the package. Data subject to change. Copyright ⓒ 2002