SUITABLE FOR WET LOCATIONS M9410/M9430SERIES MODULAR IN-GRADE LUMINAIRE SINGLE LENS DESCRIPTION TYPE JOB NAME PART NUMBER ModelMaterial Lamp Type Voltage Distribution Lens Conduit EntriesAccessories Options LampFinishList Hydrel’s M9410/M9430 Series modular in-grade lights are multi-purpose units designed for uplighting architectural and landscape features. These units can be flush mounted into a variety of substrates or landscape materials. The M9410/M9430 consists of a factory-sealed, thermally protected lamp module and encapsulated power module. The components are secured inside a heavy-duty polymer rough-in housing designed with channeled convective cooling, an integral junction box, and finish door trim assembly. FEATURES & SPECIFICATIONS Bronze or Aluminum Round DOOR MATERIAL: Cast Aluminum, cast bronze, cast aluminum or bronze with stainless perforated trim insert or Stainless Steel. Available in round or square door trim. ROUGH-IN SECTION: Injection molded polymer with integral junction box for thru- branch wiring. The housing is U.V. stabilized, impact and corrosion resistant for use in all types of environments. The rough-in has a cylinder or side-car configuration and houses the lamp and power module components and top door finishing section. LAMP MODULE: Stainless steel housing, factory-sealed and purged of all moisture for longer component life. Lens is sealed with silicone gasket and stainless steel clamp band assembly with single fastener. Electrical connection to lamp module is done through a submersible quick pull plug connector with gold-plated contacts. Unit is thermally protected. LAMP INCLUDED. LAMP TYPE: Low Voltage: MR-16 bi-pin base, 75 Watt max., PAR-36 screw terminal base, 75 Watt max. Incandescent: T-4 quartz halogen mini-can or B15d base, 100 Watt max. Fluorescent: Triple tube CFL 4-pin base, 32 Watt max. HID: T-4 or T-6 bi-pin base, 70 Watt max.,PAR-20 or PAR-30 medium or E27 base, 70 Watt max. Color Corrected Metal Halide If a specific lamp is desired, specify manufacturer’s lamp number, most lamps can be supplied. LAMP INCLUDED. 9 DIA. (229) Stainless Steel Round 10 DIA. (254) 9 Bronze or Aluminum Square 10 Stainless Steel Square 10 SQ. (254) 9 SQ. (229) VOLTAGE: See ordering guide. LIGHT DISTRIBUTION: See ordering guide. 9" (229) FINISHING SECTION: Single lens design includes door assembly with 360° Aim-Lock™ lamp module support ring. Module indexing provides easy maintenance and relamping without re-aiming. Active optical lenses are also available. Door trim locks into position with two stainless steel captive, tamper-resistant fasteners. POWER MODULE: Ballast /Transformer is encapsulated in a custom designed heat-dissipating epoxy resin that also eliminates all moisture intrusion to the ballast. Module is provided with submersible rated cord leads for connection to integral junction box and lamp module. Standard ballast is high power factor, low starting temperature; fluorescent electronic or HID magnetic. HID electronic ballast also available. CONDUIT ENTRIES: Two (2) bottom or side entries available. Box suitable for thru-branch wiring. Splicing volume is 25 in3 (410 ccm). NOTE: Potting compound (PC21) recommended for junction box splices. PC21 sold separately. ACCESSORIES: See ordering guide. FINISH: Finish is natural aluminum or bronze. Stainless steel door is brushed finish. Aluminum doors may be painted. See ordering guide for color options. LISTING: U.L., CE ©2005 Hydrel 11/15/05 M9410_M9430 9" (230) 19 3/8" (494) 10 3/8" (265) 6" (155) 16" (406) 14 3/8" (365) 6" (155) 2" (54) 7 5/8" (196) Incandescent & Fluorescent Rough-In Housing HID Rough-In Housing APPROVALS Hydrel is an ISO 9001 Certified Manufacturer 12881 Bradley Ave Sylmar, CA 91342 Phone: 818-362-9465 Fax: 818-362-6548 www.hydrel.com SUITABLE FOR WET LOCATIONS M9410/M9430 ORDERING INFORMATION 60 Hz Application Choose the boldface catalog nomenclature that best suits your needs. PART NO. EXAMPLE: M9410 SS 70CMT6 Material 120 Voltage A Aluminum B Bronze ASP 1 Alum. Stainless Perf. BBP 1 Bronze Bronze Perf. BSP 1 Bronze Stainless Perf. SS Stainless Steel 12 4 120 208 220 240 277 347 MVOLT 5 NSP FLC1O 34B Distribution6 ISS SF Conduit Entry NSP Narrow Spot SP Spot NFL Narrow Flood MFL Medium Flood FL Flood WFL Wide Flood WWD 7 Wall Wash Distribution ASY 8 Asymmetric 12B 12S 34B 34S 1/2” 1/2” 3/4” 3/4” NPT bottom NPT side NPT bottom NPT side LP Options Fusing SF 15 Single Fuse DF 16 Double Fuse Ballasting 17 GEB Electronic Ballast MLEBAD18 Analog Dimming Ballast Accessories Model M9410 Round M9430 Square Lamp Type Low Voltage FLC M50 MR16, GX5.3 base FLC5 9 M75 MR16, GX5.3 base FLC10 P3650ILV PAR36, screw FLC20 terminal base FLF P3675ILV PAR36, screw FLF510 terminal base FLCAS Incandescent 2 CLC CLF P2050I PAR20, med. base P3050I PAR30, med. base P3075I PAR30, med. base 100Q T4, mini-can base Fluorescent 18TRT Triple Tube, GX24q2 base 26TRT Triple Tube, GX24q3 base 32TRT Triple Tube, GX24q3 base MH 20CMT43 T4, G8.5 base 35CMT43 T4, G8.5 base 35CMT6 T6, G12 base 70CMT4 T4, G8.5 base 70CMT6 T6, G12 base P2035CM PAR20, med. base P3035CM PAR30, med. base P3070CM PAR30, med. base Lens Flat Lens Clear Flat Lens Clear, 5° axial Flat Lens Clear, 10° tilt Flat Lens Clear, 20° tilt Flat Lens Frosted Flat Lens Frosted, 5° axial Flat Lens Clear, Anti-Slip Convex Lens, Clear Convex Lens, Frosted Notes: 1 Not Available with M9430 square model. 11 2 Incandescent models available with 120 Volt only. 12 3 Lamps available with GEB or MLEBAD electronic 13 MVOLT (120V-277V) ballast only. 4 14 Available for Low Voltage lamps only. Remote 12V power supply required (sold separately). 15 5 MVOLT is standard on all Fluorescent lamps and MH lamps with GEB or MLEBAD ballast option. 16 6 Not all distributions are valid with all lamp types, consult lamp manufacturers’ specifications. 17 7 18 WWD distribution available with T4 G8.5 base MH, T4 mini-can base Incandescent, or Fluorescent lamps only. 8 19 ASY distribution available with Fluorescent lamps only. 9 FLC5 lens standard with WWD distribution using Fluorescent lamps. 10 FLF5 lens standard with WWD distribution using MH or incandescent lamps. ©2005 Hydrel 10/19/05 M9410_M9430 Internal 11 IHL Honeycomb Louver ISS12 Source Shield LSF13 Linear Spread Filter CFAMB 13 Color Filter Amber CFBLU 13 Color Filter Blue CFGRN13 Color Filter Green CFRED 13 Color Filter Red WWL Wall Wash Louver External 11,14 GS Glare Shield LC Lexan Cover LS Light Shield RG 13 Rock Guard Trims11,14 BTR Bronze Round BTS Bronze Square STR Stainless Round STS Stainless Square M9400 Series Assembly consists of the following individual component parts: Lamp LP Lamp Installed Finish19 BL BZ DDB DNA GN GR SND STG TVG Black Bronze Dark Bronze Natural Alum. Green Gray Sand Steel Gray Terra Verde Green WH White CF Custom Finish MRIS94 Rough-In Housing MFS94 Finishing Section MACS Lamp Module MHSL94 Ballast Module Accessories are mutually exclusive, choose one only. ISS available with T6 and T4 lamps only. Not available with WWD distribution. Not available with CLC or CLF convex lens. Accessory not available with SS door material. SF available with 120, 277 or 347 supply voltages on MH fixtures only. DF available with 208, 220 or 240 supply voltages on MH fixtures only. Ballast options available with MH lamps only. 0-10 Volt remote analog powered dimmer system with additional supply wiring required (by others). Door material finish is natural cast aluminum (A) or Hydrel is an ISO 9001 cast bronze (B) unless specified. Stainless steel Certified Manufacturer (SS) door available with brushed finish standard. 12881 Bradley Ave. Sylmar, CA 91342 Phone: 818-362-9465 Fax: 818-362-6548 www.hydrel.com SUITABLE FOR WET LOCATIONS M9410/M9430 ORDERING INFORMATION 50 Hz Application Choose the boldface catalog nomenclature that best suits your needs. PART NO. EXAMPLE: M9410 SS 70CMT6 Material 23050HZ Voltage A Aluminum B Bronze SS Stainless Steel ASP 1 Alum. Stainless Perf. BBP 1 Bronze Bronze Perf. BSP 1 Bronze Stainless Perf. 3 12 22050HZ 23050HZ 24050HZ MVOLT 4 NSP FLC1O Distribution5 NSP Narrow Spot SP Spot NFL Narrow Flood MFL Medium Flood FL Flood WFL Wide Flood WWD 6 Wall Wash Distribution ASY 7 Asymmetric Model M9410 Round M9430 Square 16B PG16 bottom 20B 20mm bottom 16S PG16 side 20S 20mm side 25S 25mm bottom LP Listing Options Ballasting GEB Electronic Ballast MLEBAD 15 Analog Dimming Ballast FLC FLC58 FLC10 FLC20 FLF FLF59 FLCAS CLC CLF Flat Lens Clear Flat Lens Clear, 5° axial Flat Lens Clear, 10° tilt Flat Lens Clear, 20° tilt Flat Lens Frosted Flat Lens Frosted, 5° axial Flat Lens Clear, Anti-Slip Convex Lens, Clear Convex Lens, Frosted Internal IHL Honeycomb Louver ISS11 Source Shield LSF12 Linear Spread Filter CFAMB 12 Color Filter Amber CFBLU12 Color Filter Blue CFGRN12 Color Filter Green CFRED 12 Color Filter Red WWL Wall Wash Louver External 10, 13 GS Glare Shield LC Lexan Cover LS Light Shield RG 12 Rock Guard Trims 10,13 BTR Bronze Round BTS Bronze Square STR Stainless Round STS Stainless Square LP Lamp included M9400 Series Assembly consists of the following individual component parts: 7 8 9 10 11 12 13 14 15 16 IEC International Electronic Commission Lamp Accessories Lens IEC 14 10 Notes: 1 Not Available with M9430 square model. 2 Lamps available with GEB or MLEBAD electronic , MVOLT (120V-277V 50/60 HZ) ballast only. 3 Available for Low Voltage lamps only. Remote 12V power supply required (sold separately). 4 MVOLT is standard on all Fluorescent lamps and MH lamps with GEB or MLEBAD ballast option. 5 Not all distributions are valid with all lamp types, consult lamp manufacturers’ specifications. 6 WWD distribution available with T4 G8.5 base MH, T4 mini-can base Incandescent or Fluorescent lamps only. ©2005 Hydrel 10/19/05 M9410_M9430 ISS Conduit Entry Lamp Type Low Voltage M50 MR16 GX5.3 base M75 MR16 GX5.3 base P3650ILV PAR36 screw terminal base P3675ILV PAR36 screw terminal base Incandescent P2050I PAR20 E27 base P3050I PAR30 E27 base P3075I PAR30 E27 base 100Q T4, mini-can Fluorescent 18TRT Triple Tube GX24q2 base 26TRT Triple Tube GX24q3 base 32TRT Triple Tube GX24q3 base MH 20CMT42 T4 G8.5 base 35CMT42 T4 G8.5 base 35CMT6 T6 G12 base 70CMT4 T4 G8.5 base 70CMT6 T6 G12 base P2035CM PAR20 E27 base P3035CM PAR30 E27 base P3070CM PAR30 E27 base 16B Finish16 BL BZ DDB DNA GN GR SND STG TVG Black Bronze Dark Bronze Natural Alum. Green Gray Sand Steel Gray Terra Verde Green WH White CF Custom Finish MRIS94 Rough-In Housing MFS94 Finishing Section MACS Lamp Module MHSL94 Ballast Module ASY distribution available with Fluorescent lamps only. FLC5 lens standard with WWD distribution using Fluorescent Lamps. FLF5 lens standard with WWD distribution using MH or incandescent lamps. Accessories are mutually exclusive, choose one only. ISS available with T6, and T4 lamps only. Not available with WWD distribution. Not available with CLC or CLF convex lens. Accessory not available with SS door material. Ballast options available with MH lamps only. 0-10 Volt remote analog powered dimmer system with additional supply wiring required (by others). Door material finish is natural cast aluminum Hydrel is an ISO 9001 (A) or cast bronze (B) unless specified. Stainless steel Certified Manufacturer (SS) door available with brushed finish standard. 12881 Bradley Ave. Sylmar, CA 91342 Phone: 818-362-9465 Fax: 818-362-6548 www.hydrel.com