Series 3 3 Amp • 120, 240 Vac • AC Output work (S3 types), Series 3 is an ideal replacement for power reed relays in microprocessor or computer-based logic level systems. Designed for long, reliable service in a multitude of demand• UL, CSA, VDE Approved ing industrial environments. Manufactured in Crydom's ISO 9001 These solid state relays combine small Certified facility for optimum product size and high ratings in a PC-board- performance and reliability. mounted SPST-NO design. Available with (S30 types) or without snubber net- • Compact for High Density PCB M ount • Small Footprint CURRENT DERATING CURVE Load Current [Amps] 4 MODEL NO. INPUT SPECIFICATIONS ➀ S312 S3012A S322 S3022A Control Voltage Range 3.5-8 Vdc 3.5-8 Vdc Nominal Input Impedance 200 Ohm 200 Ohm Typical Input Current @ 5 Vdc 20 mAdc 20 mAdc 3 2 Must Turn On Voltage 3.5 Vdc 3.5 Vdc 1 Must Turn Off Voltage 1.0 Vdc 1.0 Vdc 0 Operating Voltage Range (47-63 Hz) OUTPUT SPECIFICATIONS ➀ 20 40 60 80 Ambient Temperature [˚ûC] Max Load Current vs. Temperature S3 Package .45 .68 (11.4) (17.3) 1 INPUT LOAD 2 .80 .60 (20.3) (15.2) 3 + BOTTOM VIEW 4 .10 (2.5) .70 (17.8) .80 (20.3) 1.20 (30.5) .10 (2.5) .15-3.0 INPUT LOAD 3 + .025 x .025 TERMINAL PIN (4 PLACES) BOTTOM VIEW 4 .70 (17.8) .80 (20.3) 1.45 (36.8) All dimensions are in inches (millimeters) APPROVALS UL E116949 CSA LR81689 VDE 10114 UG FastFax Document No. 117 SERIES 3 Rev. 042302 PAGE 1 OF 1 .15-3.0 600 Vpk 600 Vpk Max. Surge Current, (16.6ms) 55 Apk 55 Apk 200 V/µsec 200 V/µsec ➂ 1.0 mA Max.Off-State Leakage @ Rated Voltage 4.0 mA 1.0 mA 4.0 mA Max. On-State Voltage Drop @ Rated Current 1.5 Vpk 1.5 Vpk Max.Turn-On Time 1/2 cycle 1/2 cycle Max. Turn-Off TIme 1/2 cycle 1/2 cycle 0.5 0.5 Dielectric Strength ➁ 4000 Vrms Insulation Resistance (Min.) @ 500 Vdc ➁ 109 Ohm 8.0 pF Max. Capacitance 1 .15-3.0 GENERAL SPECIFICATIONS S30 Package 2 40-280 Vrms Transient Over-Voltage Power Factor (Min.) WIth Max. Load .70 .87 (17.8) (22.1) .60 .80 (15.2) (20.3) .15-3.0 Load Current Range (Arms) Min. Off-State dv/dt @ Max. Rated Voltage .025 x .025 TERMINAL PIN (4 PLACES) 20-140 Vrms Ambient Operating Temperature Range -30 to 80˚C Ambient Storage Temperature Range -30 to 125˚C M ECHANICAL SPECIFICATIONS 0.6 oz. (0.8 g) Weight: (typical) Encapsulation: GENERAL NOTES ➀ ➁ ➂ Thermally Conductive Epoxy ©2002 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25˚C unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Off-State dv/dt test method per EIA/NARM standard RS-443. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]. GERMANY: +49 (0)180 3000 506