9800 Series/Surface Mount Reed Relays SURFACE MOUNT REED RELAYS Ideally suited to the needs of Automated Test Equipment, Instrumentation and Telecommunications requirements, Coto’s 9800 Series is an ultra-miniature Surface Mount Reed Relay that combines small size with exceptional RF performance. 9814 extends life at ATE loads 3X or more utilizing Coto’s proprietary switch technology. The external Magnetic Shield reduces interaction between parts in high density boards. 9852 adds a form C capability. Small size plus added features allow for high density packing, and make these relays ideal for designs such as high speed, high pin count VLSI testers where speed, size and performance are all needed. SERIES FEATURES Available in Axial, Gull wing and “J” lead configurations Tape and Reel packaging available High reliability, hermetically sealed contacts for long life 12 High Insulation Resistance - 10 Ω minimum Coaxial shield for 50 Ω impedance. Excellent for RF and Fast Rise Time Pulse switching (up to 6 GHz) External Magnetic Shield Model 9802 Gull Wing Dimensions in Inches (Millimeters) Models 9814 & 9852 2 Axial Axial Gull Wing 2 2 J-Lead 2 J-Lead 38 COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920 6 (Europe) Tel: +31-45-5439345 / Fax +31-45-5427216 9800 Series/Surface Mount Reed Relays Model Number 9802 9814 9852 1 Form A 50 Ω Coaxial 1 Form C 50 Ω Coaxial Test Conditions Units 1 Form A 50 Ω Coaxial +/- 10%, 25° C Must Operate by Must Release by VDC VDC Ω VDC - Max. VDC - Min. 5 6 150 3.8 0.4 100 0.25 0.5 3 100 0.25 0.5 3 30 0.1 0.2 3 Signal Level 1.0V,10mA Volts Amps Amps Watts x 106 Ops. 250 1000 200 N/O 100N/C 50mV, 10mA Ω 0.125 0.125 0.150 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.150 0.150 0.150 Between all Isolated Pins at 100V, 25°C, 40% RH No Shield Shield Floating Shield Guarding Ω x 1012 1012 109 pF pF pF 0.2 0.2 1.0 Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 0.5 0.5 1.0 Closed Contact to Coil Shield Guarding pF 0.5 0.5 0.5 Contact to Shield Contacts Open, Shield Floating pF - - - Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 200 1500 1500 200 1500 1500 200 1000 1000 Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.25 0.25 0.26 Release Time - Typical Zener-Diode Suppression3 msec. 0.05 0.05 0.26 Parameters COIL SPECIFICATIONS Nom. Coil Voltage Max. Coil Voltage Coil Resistance Operate Voltage Release Voltage CONTACT RATINGS Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy-Typical1 Static Contact Resistance (max. init.) Dynamic Contact Resistance (max. init.) RELAY SPECIFICATIONS Insulation Resistance (minimum) Capacitance - Typical Across Open Contacts Dielectric Strength (minimum) Max DC/Peak AC Resist. Max DC/Peak AC Resist. Max DC/Peak AC Resist. Max DC/Peak AC Resist. 3.3 4 70 2.5 0.4 5 6 150 3.8 0.4 3.3 4 70 2.5 0.4 5 6 110 3.8 0.4 Top View: Dot stamped on top of relay refers to pin #1 location Notes: 1 Consult factory for life expectancy at other switching loads. Contact resistance 2.0Ω defines end of life. 2 Surface mount component processing temperature: 438°F(226°C) max for 1 minute dwell time. Temperature measured on leads where lead exits molded package. 3 Consists of 20V Zener-diode and 1N1002 diode in series, connected in parallel with coil. Environmental Ratings Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4%/°C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com 6 E-mail: [email protected] 39