ETC CLE233

®
CLE230,CLE231,CLE232,CLE233
High Power Aluminum Gallium Arsenide IREDs
Clairex
Technologies, Inc.
February, 2001
0.158 (4.01)
0.136 (3.45)
0.100 (2.54) dia.
1.00 (25.4) min.
0.210 (5.33)
0.190 (4.83)
0.215 (5.46)
0.205 (5.21)
ANODE
0.190 (4.83)
0.176 (4.47)
CATHODE
0.025 (0.64) max.
0.050 (1.27)
0.030 (0.76)
0.147 (3.73)
0.137 (3.48)
0.019 (0.48)
0.016 (0.41)
ALL DIMENSIONS ARE IN INCHES
(MILLIMETERS)
Case
2
absolute maximum ratings (TA = 25°C unless otherwise stated)
features
•
•
•
•
narrow emission angle
TO-46 hermetically sealed package
excellent heat dissipation
high power output
description
The CLE230 series are AlGaAs
infrared emitting diodes mounted in
TO-46 hermetic packages. The
narrow emission angle provides high
on-axis intensity. The series are
spectrally and mechanically matched
to the CLT130 phototransistor series.
For additional information, call
Clairex.
storage temperature ...................................................................... -55°C to +150°C
operating temperature ................................................................... -55°C to +125°C
lead soldering temperature(1) ......................................................................... 240°C
maximum continuous current(2) ..................................................................... 100mA
peak forward current (10µs pulse width, 100pps) .............................................. 10A
maximum power dissipation(3)...................................................................... 170mW
reverse voltage .................................................................................................... 3V
notes:
1.
2.
3.
0.06” (1.5mm) from the header for 5 seconds maximum. Maximum
temperature can be 260°C if wave soldering.
Derate linearly 1.0mA/°C from 25°C free air temperature to TA = +125°C.
Derate linearly 1.7mW/°C from 25°C free air temperature to TA = +125°C.
electrical characteristics (TA = 25°C unless otherwise noted)
symbol
Ee
parameter
(1)
Irradiance
CLE230
CLE231
CLE232
CLE233
min
typ
max
units
1.0
-
-
mW/cm
1.5
-
-
2.6
-
-
3.5
-
-
Forward voltage
-
-
1.8
IR
Reverse current
-
-
λP
Peak emission wavelength
-
880
BW
Spectral bandwidth at half power points
-
ΘHP
VF
test conditions
2
IF = 100ma
V
IF = 100ma
10
µA
VR = 3.0V
-
nm
IF = 100ma
80
-
nm
IF = 20ma
Emission angle at half power points
-
40
-
deg.
IF = 20ma
tr
Output rise time
-
700
-
ns
IF = 100ma
tf
Output fall time
-
700
-
ns
IF = 100ma
note: 1. Measured into a 0.25” aperture, 1.20” from device lens.
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Clairex Technologies, Inc.
Phone: 972-422-4676
1845 Summit Ave., #404
Fax: 972-423-8628

Plano, Texas 75074-8148
www.clairex.com