ETC DC60SA3

Series DC60
3-7Amp • 60 Vdc • DC Output
• Cost Effective
• Industry Standard Package
• AC or DC Control
• Panel M ount
MODEL NUMBERS
Bipolar transistor outputs are available
in 3, 5 and 7 amp ratings. Cost-effective relays offer 4000 Volt isolation and
come in Crydom's standard panelmount package.
Manufactured in Crydom's ISO 9001
Certified facility for optimum product
performance and reliability.
DC CONTROL
AC CONTROL
DC60S3
DC60S5
DC60S7
DC60SA3
DC60SA5
DC60SA7
Operating Voltage Range [Vdc]
3-60
3-60
3-60
3-60
3-60
3-60
Load Current Range➁ [Adc]
.02-3
.02-5
.02-7
.02-3
.02-5
.02-7
6
10
14
6
10
14
Max. On-State Voltage Drop @ Rated Current [Vdc]
1.3
1.5
1.7
1.3
1.5
1.7
Thermal Resistance Junction to Case (R¯JC ) [ûC/W]
2.2
2.2
2.2
2.2
2.2
2.2
Max. Off-State Leakage Current @ Rated Voltage [mA]
0.1
0.1
0.1
0.1
0.1
0.1
Max. Turn-On Time [msec]
0.1
0.1
0.1
10
10
10
Max. Turn-Off Time [msec]
0.3
0.3
0.3
40
40
40
OUTPUT SPECIFICATIONS ➀
Max. Surge Current, (1 sec) [Adc]
INPUT SPECIFICATIONS ➀
DC CONTROL
AC CONTROL
Control Voltage Range
3.5-32 Vdc
90-280 Vrms
Max. Turn-On Voltage
3.5 Vdc
90 Vrms
Min. Turn-Off Voltage
1.0 Vdc
10 Vrms
1500 Ohms
60K Ohms
2.2mA @ 5 Vdc
2mA @ 120 Vrms, 4mA @ 240 Vrms
Nominal Input Impedence
Typical Input Current
GENERAL NOTES
➀
➁
©2002 CRYDOM CORP, Specifications subject to change without notice.
All parameters at 25˚C unless otherwise specified.
Heat sinking required, for derating curves see page 2.
FastFax Document No. 163
SERIES DC60.
Rev. 021202
PAGE 1 OF 2
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [email protected] WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected].
GERMANY: +49 (0)180 3000 506
Series DC60
3-7Amp • 60 Vdc • DC Output
GENERAL SPECIFICATIONS
Dielectric Strength 50/60Hz (input/output/base)
4000 Vrms
109 Ohm
Insulation Resistance (Min.) @ 500 Vdc
8 pF
Max. Capacitance Input/Output
Ambient Operating Temperature Range
-30 to 80˚C
Ambient Storage Temperature Range
-30 to 125˚C
M ECHANICAL SPECIFICATIONS
Weight: (typical)
3.0 oz. (86.5g)
Encapsulation:
Thermally Conductive Epoxy
Terminals:
4
1.10
(27.9)
.45
(11.4)
MOUNTING
HOLE/SLOT
0.17 (4.3) DIA.
Input and output polarity must be observed.
Inductive loads must be diode suppressed.
8-32 TERMINAL
(2 PLACES )
All dimensions are in inches
(millimeters)
1 (+)
INPUT
LOAD
OUTPUT
AC CONTROL M ODELS
PIN 3: AC CONTROL
PIN 4: AC CONTROL
DC CONTROL M ODELS
PIN 3 : + DC CONTROL
PIN 4: -- DC CONTROL
Screws and Saddle Clamps Furnished, Unmounted
SSR
3
+
1.87
(47.5)
(+)
(Ð)
2 (--)
--
OUTPUT
1
2
SOLID-STATE RELAY
4
3
--
2.30
(58.4)
1.70
(43.2)
Screw Torque Requirements :
6-32 Screws - 10 in. lbs.,
8-32 and 10-32 Screws - 20in. lbs.
(Screws dry without grease.)
+
INPUT
Transient Protection
All loads are inductive, even ones that are not so labeled. An
inductive load will produce harmful transient voltages when it
is turned off. Diodes should be fast recovery type with PIV rated
greater than supply voltage.
1.00
(25.4)
1.80
(45.7)
6-32 TERMINAL
(2 PLACES)
CURRENT DERATING CURVES
3A
5A
12
105
NO HEAT SINK
110
115
4
Power Dissipation
7.5˚C/W
8
2˚C/W
Base Plate Temp [˚C]
Power Dissipation
100
7.5˚C/W
5˚C/W
100
105
8
NO HEAT SINK
110
115
4
120
Base Plate Temp [˚C]
12
.78
(19.8)
.90
(22.9)
120
0
0
1
1.5
2
Load Current [Arms]
2.5
3
20
40
60
80
100
1
Max Ambient Temp. [˚C]
2
3
4
5
Load Current [Arms]
20
40
60
80
100
Max Ambient Temp. [˚C]
7A
7.5˚C/W
5˚C/W
100
105
8
NO HEAT SINK
110
115
4
Base Plate Temp [˚C]
2˚C/W
Power Dissipation
Crydom Heat Sinks offer excellent
thermal management and are perfectly matched to the load current
ratings of Crydom panel mount
relays. Request Crydom's Heat Sink
specification sheet for all the details.
12
120
0
1
2
3
4
5
Load Current [Arms]
6
7
20
40
60
80
100
Max Ambient Temp. [˚C]
©2002 CRYDOM CORP, Specifications subject to change without notice.
FastFax Document No. 163
SERIES DC60.
Rev. 021202
PAGE 2 OF 2
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [email protected] WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected].
GERMANY: +49 (0)180 3000 506