M Litton Kester Solder TSF-6522 No-Clean Tacky Soldering Flux Product Description • Copper Mirror Corrosion: Low Tested to J-STD-004, IPC-TM-650, Method 2.3.32 Kester formula TSF-6522 is a no-clean tacky soldering flux formula designed to be used with a rotating disc, a doctor blade, or a drum fluxer. The TSF-6522 can also be used in dot dispensing for BGA/PGA sites or in a rework application for surface mount packages. TSF-6522 maintains its activity and dispensing characteristics for up to 8 hours and can be used in a wide range of temperature and humidity conditions. Kester maintains the highest standards by manufacturing the TSF-6522 under a vacuum environment. • • • • High tack values and long tack life Leaves bright/shiny solder joints after reflow ANSI/J-STD-004 flux designator ROL0 Can reflow in air or nitrogen environments Physical Properties (typical) • Viscosity: 285 poise Kester Method #1W-QC-3-09 • Tackiness (grams-force): 100 Kester Method #1W-QC-03-04 • Acid Number: 75.4 Kester Method #1W-QC-G-01 • Color: Yellow to Light Amber Kester Method #1W-QC-G-18 Reliability Properties (typical) • Corrosion Test: Low Tested to J-STD-004, IPC-TM-650, Method 2.6.15 • pH 5% Solution: 7.7 Kester Method #1W-QC-G-15 Qualitative Halide Tests: • Silver Chromate: Pass Tested to J-STD-004, IPC-TM-650, Method 2.3.33 • Fluorides by Spot Test: Pass Tested to J-STD-004, IPC-TM-650, Method 2.3.35.1 • Typical S.I.R., IPC: Tested to J-STD-004, IPC-TM-650, Method 2.6.3.3, (B-24 coupon) 10 Blank at 24 hours: 3.08 x 10 ohms Blank at 96 hours: 1.27 x 1010 ohms Blank at 168 hours: 8.79 x 109 ohms Uncleaned at 24 hours: 2.56 x 108 ohms Uncleaned at 96 hours: 4.17 x 108 ohms Uncleaned at 168 hours: 6.38 x 108 ohms • Typical S.I.R., Bellcore: Tested to TR-NWT-000078, IPC B-24 coupon 12 Blank at 24 hours: 1.44 x 10 ohms Blank at 96 hours: 1.38 x 1013 ohms Uncleaned at 24 hours: 2.19 x 1013 ohms Uncleaned at 96 hours: 1.56 x 1013 ohms The data and recommendations presented are based on tests which we consider reliable. Because Kester Solder has no control over the conditions of use, we disclaim any responsibility connected with the use of any of our products or the information presented. We advise that all chemical products be used only by or under the direction of technically qualified personnel who are aware of the potential hazards involved and the necessity for reasonable care in their handling. KESTER SOLDER 515 East Touhy Ave. Des Plaines, IL 60018-2675 847 297 1600 847 390 9338 FAX 1-800-2-KESTER www.kester.com BRANCHES: ANAHEIM, CA • JAMESTOWN, NY BRANTFORD, ONTARIO, CANADA • SINGAPORE • GERMANY • TAIWAN Standard Applications: • Works on flip chip, chip scale package and flip chip bumping sites assemblies as a soldering flux. • Tacky solder flux formulations are designed for pin transfer, dot dispensing and/or syringe applications. • Tacky solder flux formulations can be used as a tack and flux vehicle for soldering components to a solid solder deposit (SSD), or precision pad technology (PPT) board surfaces. • Great for rework applications on all PCB packages. • Can be used in BGA/PGA sphere/pin attachment vehicle or for repair and reballing/repinning. Application Notes Reflow Profiles: Plastic Ball Grid Array vs.Standard Kester Reflow Profile TSF-6522 No-Clean Tacky Soldering Flux TSF-6522 No-Clean Tacky Soldering Flux Reflow Profile Standard Surface Mount Packages Temperature (°C) Temperature (°C) 240 BGA Reflow Profile Standard Reflow Profile 220 240 Peak Temp. 210°C max. 200 Peak Temp. 220 210 - 235°C 200 180 . 180 160 0.33°C/sec. 120 100 100 1.75°C/sec. 80 60 Primary Pre-heat Zone (45-55sec.) 40 20 0 0 30 60 80 Secondary Pre-heat Zone (60-75 sec.) Reflow Zone (45-60 sec.) Soak Zone (~120 sec.) 60 40 20 90 120 150 180 210 240 270 300 330 0 . . . . . . . . . . . . 1.3 - 1.6°C/Sec . . . . . . . . . . . . Soaking Zone . . ( 2.0 min. max. ) ~ 60 - 90 sec. ideal . <2.5° C/ Sec . . Pre-heating Zone . .( 2.0 - 4.0 min. max.) . . . 140 0.50°C/sec. 120 . 0.5 - 0.6 °C/ Sec 160 140 . 0 30 60 90 Time (Seconds) 120 150 . . . . . . . . . . . . . . . . . . . . 180 . . . . . . . . . . . Reflow Zone . . . (30 - 90 sec. max.) ~40 - 60 sec. ideal . . . . . . . . . . . 210 240 270 300 Time (Seconds) Printing Parameters: • Temperature/Humidity -- Optimal ranges for production are 21-25°C (70-77°F) and 35-65% R.H. Activation Parameters: • Temperature -- Optimal activation temperatures are 130°-185°C (266-365°F). See “Soak Zone” in diagrams above. Cleaning: • Formula TSF-6522 is a no-clean formula. The residues do not need to be removed for typical applications. • Although formula TSF-6522 is designed for no-clean applications, its residues can be easily removed using automated cleaning equipment (in-line or batch) with the aid of Kester Bio-Kleen #5768 saponifier in a 10-12% concentration in de-ionized water at approximately 140°F (60°C). Available Packaging: • Syringes -- 10 gram (10cc) and 30 gram (30cc) syringes available. • Cartridges -- 150 gram and 300 gram cartridges available. • Jars -- 50 gram and 100 gram jars available. Storage, Handling, and Shelf Life: • Storage & Handling -- should be kept at standard refrigeration temperatures and humidity conditions, 0-10°C (32-50°F) and 35-55% R.H. respectively. • Shelf life -- 4 months from date of manufacture when held at 0-10°C (32-50°F). Health & Safety: • This product, during handling or use, may be hazardous to health or the environment. • Read the Material Safety Data Sheet and warning label before using this product. Attention Specification Writers: • The technical information contained herein is consistent with the properties of this material but should not be used in the preparation of specifications as it is intended for reference only. • For assistance in preparing specifications, please contact your local Kester Solder office for details. 24 Nov 98/TJT/dms