140 MHz SAW Bandpass Filter 14.5 MHz bandwidth Part Number SF0140BA02370S Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE Horizontal: 5 MHz/div Vertical (from top): Magnitude Magnitude Group Delay Deviation 10 1 50 dB/div dB/div ns/div SPECIFICATION Parameter Center Frequency (Fc, at 23°C) Minimum Insertion Loss Lower 1 dB Band Edge 2 Upper 1 dB Band Edge 2 Lower 10 dB Band Edge 2 Upper 10 dB Band Edge 2 Lower 35 dB Band Edge 2 Upper 35 dB Band Edge 2 Passband Ripple (in 1 dB Bandwidth) Group Delay Variation (132.75 to 147.25 MHz) Absolute Delay Rejection (130 MHz to 131.25 MHz) Rejection (20 MHz to 130 MHz) Rejection (148.75 MHz to 150.5 MHz) Rejection (150.5 MHz to 250 MHz) Source and Load Impedance Temperature coefficient of frequency Operating Temperature Range Notes: Min Typ 140 Max 20 132.75 147.25 132.00 148.00 131.25 37 40 35 40 20 0.8 50 1.32 40 45 37 45 50 -94 23 148.75 1 100 1.60 26 Units MHz dB MHz MHz MHz MHz MHz MHz dB p-p ns p-p us dB dB dB dB Ω ppm/°C °C 1. Specifications apply at room ambient temperature only. 2. Parameter is measured relative to the minimum insertion loss. 3. Due to type of matching, the Return Loss is expected to be low. Rev X6 20-Apr-05 Page 1 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3 140 MHz SAW Bandpass Filter 14.5 MHz bandwidth Part Number SF0140BA02370S Integrated Circuit Systems, Inc. PACKAGE OUTLINE Units: mm Pad Configuration: Input: 11 Output: 5 Ground: 1,2,3,4,6,7,8,9,10,12 MATCHING CIRCUIT 11 5 All other pads Note • Matching components are not required. ISO 9001 Registered Rev X6 20-Apr-05 Page 2 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3