Bulletin I2206 12/04
SAFEIR Series
10ETS12SPbF
INPUT RECTIFIER DIODE
Lead-Free ("PbF" suffix)
VF < 1V @ 10A
IFSM = 200A
VRRM = 1200V
Description/ Features
The 10ETS12SPbF rectifier SAFEIR series has
been optimized for very low forward voltage drop,
with moderate leakage. The glass passivation
technology used has reliable operation up to 150°C
junction temperature.
Typical applications are in input rectification and
these products are designed to be used with
International Rectifier Switches and Output
Rectifiers which are available in identical package
outlines.
Output Current in Typical Applications
Applications
Single-phase Bridge
Capacitive input filter TA = 55°C, TJ = 125°C
common heatsink of 1°C/ W
Units
10
A
VRRM
1200
V
IFSM
200
A
1.1
V
- 40 to 150
°C
VF
@ 10 A, TJ = 25°C
TJ
www.irf.com
16.0
A
Package Outline
Values
IF(AV) Sinusoidal waveform
Units
12.0
Major Ratings and Characteristics
Characteristics
Three-phase Bridge
D2 Pak (SMD-220)
1
10ETS12SPbF SAFEIR Series
Bulletin I2206 03/05
Voltage Ratings
VRRM , maximum
VRSM , maximum non repetitive
IRRM
Part Number
peak reverse voltage
V
peak reverse voltage
V
150°C
mA
10ETS12SPbF
1200
1300
0.5
Absolute Maximum Ratings
Parameters
Values
Units
10
A
IF(AV) Max. Average Forward Current
IFSM
I2t
Max. Peak One Cycle Non-Repetitive
170
Surge Current
200
Max. I2t for fusing
130
A
A2s
145
2
I √t
2
Max. I √t for fusing
Conditions
@ TC = 105° C, 180° conduction half sine wave
10ms Sine pulse, rated VRRM applied
10ms Sine pulse, no voltage reapplied
10ms Sine pulse, rated VRRM applied
10ms Sine pulse, no voltage reapplied
2
1450
A √s
Values
Units
t = 0.1 to 10ms, no voltage reapplied
Electrical Specifications
Parameters
VFM
Max. Forward Voltage Drop
1.1
V
rt
Forward slope resistance
20
mΩ
VF(TO) Threshold voltage
0.82
V
IRM
0.05
Max. Reverse Leakage Current
mA
0.50
Conditions
@ 10A, TJ = 25°C
TJ = 150°C
TJ = 25 °C
TJ = 150 °C
VR = rated VRRM
Thermal-Mechanical Specifications
Parameters
Values
Units
TJ
Max. Junction Temperature Range
- 40 to 150
°C
Tstg
Max. Storage Temperature Range
- 40 to 150
°C
RthJC Max. Thermal Resistance Junction
to Case
RthJA Max. Thermal Resistance Junction
to Ambient (PCB Mount)*
2.5
°C/W
62
°C/W
Ts
Soldering Temperature
240
°C
wt
Approximate Weight
2 (0.07)
g (oz.)
Case Style
D2Pak (SMD-220)
Device Marking
Conditions
DC operation
10ETS12S
2
* When mounted on 1" square (650mm ) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W
For recommended footprint and soldering techniques refer to application note #AN-994
2
www.irf.com
10ETS12SPbF SAFEIR Series
150
10ETS.. Series
R thJC (DC) = 2.5 °C/ W
140
130
Conduction Angle
120
110
100
30°
60°
90
80
0
2
4
90°
6
120°
8
180°
10
12
Maximum Allowable Case Temperature (°C)
Maximum Allowable Case Temperature (°C)
Bulletin I2206 03/05
150
10ETS.. Series
R thJC (DC) = 2.5 °C/ W
140
130
Conduction Period
120
110
30°
60°
100
90
90°
0
2
Average Forward Current (A)
10
RMSLimit
8
6
4
Conduction Angle
2
10ETS.. Series
TJ = 150°C
0
0
2
4
6
8
10
Maximum Average Forward Power Loss (W)
12
8
10
180°
12
DC
14
16
18
Fig. 2 - Current Rating Characteristics
20
DC
180°
120°
90°
60°
30°
18
16
14
12
10
RMSLimit
8
6
Conduction Period
4
10ETS.. Series
TJ = 150°C
2
0
0
2
4
6
8
10
12
14
16
Average Forward Current (A)
Average Forward Current (A)
Fig. 3 - Forward Power Loss Characteristics
Fig. 4 - Forward Power Loss Characteristics
200
180
At Any Ra ted Load Condition And With
Rated V RRM Ap plied Following Surge.
Initial TJ = 150°C
160
@60 Hz 0.0083 s
@50 Hz 0.0100 s
140
120
100
80
10ETS.. Series
60
40
1
10
100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
www.irf.com
Peak Half Sine Wave Forward Current (A)
Maximum Average Forward Power Loss (W)
Peak Half Sine Wave Forward Current (A)
180°
120°
90°
60°
30°
14
6
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
16
4
120°
240
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration.
Initial TJ = 150 °C
200
No Voltage Reap plied
Rated VRRM Reapplied
180
220
160
140
120
100
80
60
40
0.01
10ETS.. Series
0.1
1
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
3
10ETS12SPbF SAFEIR Series
Bulletin I2206 03/05
Instantaneous Forward Current (A)
100
TJ= 25°C
TJ= 150°C
10
10ETS.. Series
1
0
0.5
1
1.5
2
2.5
3
Instantaneous Forward Voltage (V)
Transient The rmal Impeda nc e Z thJC (°C/ W)
Fig. 8 - Forward Voltage Drop Characteristics
10
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
Steady State Value
(DC Operation)
1
10ETS.. Series
Single Pulse
0.1
0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 9 - Thermal Impedance ZthJC Characteristics
4
www.irf.com
10ETS12SPbF SAFEIR Series
Bulletin I2206 03/05
Outline Table
4.69 (0.18)
4.20 (0.16)
10.16 (0.40)
REF.
1.32 (0.05)
1.22 (0.05)
6.47 (0.25)
15.49 (0.61)
93°
6.18 (0.24)
14.73 (0.58)
2.61 (0.10)
5.28 (0.21)
2.32 (0.09)
4.78 (0.19)
0.55 (0.02)
8.89 (0.35)
3X
REF.
1.40 (0.055)
1.14 (0.045)
2X
1
0.46 (0.02)
0.93 (0.37)
MINIMUM RECOMMENDED FOOTPRINT
0.69 (0.27)
11.43 (0.45)
3
4.57 (0.18)
4.32 (0.17)
2
8.89 (0.35)
17.78 (0.70)
0.61 (0.02) MAX.
5.08 (0.20) REF.
3.81 (0.15)
2.08 (0.08)
2X
Dimensions in millimeters and inches
2.54 (0.10)
2X
Marking Information
THIS IS A 10ETS12S WITH
LOT CODE 5K3A
ASSEMBLED ON WW 12, 2000
INTERNATIONAL
RECTIFIER
LOGO
ASSEMBLY
LOT CODE
www.irf.com
PART NUMBER
10ETS12S
DATE CODE
YEAR 0 = 2000
WEEK 12
P = LEAD-FREE
5
10ETS12SPbF SAFEIR Series
Bulletin I2206 03/05
Tape & Reel Information
TRR
1.60 (0.063)
1.50 (0.059)
4.10 (0.161)
3.90 (0.153)
1.60 (0.063)
1.50 (0.059)
DIA.
0.368 (0.0145)
0.342 (0.0135)
FEED DIR ECTION
1.85 (0.073)
11.60 (0.457)
11.40 (0.449)
1.65 (0.065)
15.42 (0.609)
15.22 (0.601)
TRL
1.75 (0.069)
10.90 (0.429)
10.70 (0.421)
1.25 (0.049)
24.30 (0.957)
23.90 (0.941)
DIA.
16.10 (0.634)
4.72 (0.186)
4.52 (0.178)
15.90 (0.626)
FEED DIRECTION
Dimensions in millimeters and inches
13.50 (0.532)
12.80 (0.504)
DIA.
26.40 (1.039)
24.40 (0.961)
SMD-220 Tape & Reel
When ordering, indicate the part
number, part orientation, and the
quantity. Quantities are in multiples
360 (14.173)
DIA. MAX.
6
60 (2.362)
of 800 pieces per reel for both
TRL and TRR.
DIA . MIN.
www.irf.com
10ETS12SPbF SAFEIR Series
Bulletin I2206 03/05
Ordering Information Table
Device Code
10
E
T
S
12
S
TR
PbF
1
2
3
4
5
6
7
8
1
-
2
-
Current Rating (10 = 10A)
Circuit Configuration
E = Single Diode
3
-
Package
T = TO-220AC
4
-
Type of Silicon
5
-
Voltage Rating (12 = 1200V)
6
-
S = TO-220 D2Pak (SMD-220) Version
7
-
y none = Tube
S = Standard Recovery Rectifier
y TRL = Tape & Reel (Left Oriented)
y TRR = Tape & Reel (Right Oriented)
8
-
y none = Standard Production
y PbF = Lead-Free
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 03/05
www.irf.com
7