XPower Part Number: AA1010SY28ZC SUPER BRIGHT YELLOW PRELIMINARY SPEC Features z PLCC-4 PACKAGE. z SINGLE COLOR. z HIGH LUMINANCE. z HIGH POWER,OPERATING CURRENT @350mA. z SUITABLE FOR ALL SMT ASSEMBLY METHODS. z PACKAGE : 500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. zPATENT PENDING. Applications z RoHS COMPLIANT. ztraffic signaling zbacklighting (illuminated advertising , general lighting) zinterior and exterior automotive lighting zsubstitution of micro incandescent lamps zportable light source (e.g. bicycle flashlight) zsignal and symbol luminaire for orientation zmarker lights (e.g. steps, exit ways, etc) zdecorative and entertainment lighting Package Dimensions zindoor and outdoor commercial and residential architectural lighting Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO:DSAH7222 REV NO: V.1 DATE: SEP/03/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201003301 Selection Guide Dice Part No. AA1010SY28ZC Lens Type SUPER BRIGHT YELLOW (InGaAlP) WATER CLEAR luminous Intensity [2] Iv(cd)@ 350mA Фv (lm) [2] @ 350mA Viewing Angle [1] Min. Typ. Min. Typ. 2θ1/2 5.7 9 12.5 23 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Pt 1.2 W Power dissipation Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +85 °C IF 350 mA Peak Forward Current [2] IFM 500 mA Thermal resistance [1] Rth 80 °C/W DC Forward Current [1] Notes: 1.Results from mounting on PC board FR4(pad size≥100mm 2 per pad), mounted on pc board-metal core PCB is recommend for lowest thermal Resistance. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25°C Parameter Wavelength at peak emission Dominant Wavelength IF=350mA [Typ.] IF=350mA [Typ.] Spectral bandwidth at 50%ΦREL MAX IF=350mA [Typ.] Symbol Value Unit λpeak 590 nm λdom [1] 588 nm Δλ 20 nm Forward Voltage IF=350mA [Min.] Forward Voltage IF=350mA [Typ.] 2.0 VF [2] Forward Voltage IF=350mA [Max.] 2.5 V 3.0 Temperature coefficient of λpeak IF=350mA, -10°C≤ T≤100°C [Typ.] TCλpeak 0.15 nm/ °C Temperature coefficient of λdom IF=350mA, -10°C≤ T≤100°C [Typ.] TCλdom 0.13 nm/ °C Temperature coefficient of VF IF=350mA, -10°C≤ T≤100°C [Typ.] TCV -2.0 mV/ °C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO:DSAH7222 REV NO: V.1 DATE: SEP/03/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201003301 AA1010SY28ZC SPEC NO:DSAH7222 REV NO: V.1 DATE: SEP/03/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201003301 AA1010SY28ZC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Reel Dimension Tape Specifications (Units : mm) SPEC NO:DSAH7222 REV NO: V.1 DATE: SEP/03/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201003301 PACKING & LABEL SPECIFICATIONS AA1010SY28ZC SPEC NO:DSAH7222 REV NO: V.1 DATE: SEP/03/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201003301