XPower PRELIMINARY SPEC Part Number: AA1010ZG10ZC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z PLCC-4 PACKAGE. z SINGLE COLOR. z HIGH LUMINANCE. z HIGH POWER,OPERATING CURRENT @350mA. z SUITABLE FOR ALL SMT ASSEMBLY METHODS. z PACKAGE : 500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z PATENT PENDING. Description zRoHS COMPLIANT. The LED is encapsulated with a soft silicone material. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 1 OF 6 ERP: 1201003391 Applications z traffic signaling. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z portable light source (e.g. bicycle flashlight). z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Application Notes z Pressure or stress can damage the encapsulating material and affect the reliability of the LED. Precaution should be taken to avoid pressure on the LED encapsulating surface. z Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. z Handling Indications Use proper handling techniques to prevent damage to the LED surface. Minimize mechanical stress on the LED surface during processing and handling. Do not touch the emitting surface with sharp objects to avoid scratching or damaging the LED. Figure 1 Figure 2 In general, LEDs should be handled by the sides of the For automated pick-and-place machines, the pickup nozzle package. Handling instruments should not touch the emitting should be larger than the size of the LED reflector area to surface of the LED package. avoid placing excess pressure on the LED surface. SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 2 OF 6 ERP: 1201003391 Selection Guide Dice Part No. AA1010ZG10ZC Green (AlInGaN) luminous Intensity [2] Iv (cd)@ 350 mA Lens Type WATER CLEAR Viewing Angle [1] Φv (lm) [2] @ 350 mA Min. Typ. Min. Typ. 2θ1/2 12 20 39 65 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 1.2 W Junction temperature TJ 110 °C Operating Temperature Top -40 To +100 °C Storage Temperature Tstg -40 To +100 °C IF 350 mA Peak Forward Current [2] IFM 500 mA Thermal resistance [1] Rth 9 °C/W DC Forward Current [1] Notes: 1.Results from mounting on PC board FR4(pad size≥100mm 2 per pad), mounted on pc board-metal core PCB is recommend for lowest thermal Resistance. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Wavelength at peak emission IF=350mA [Typ.] λpeak 520 nm λdom [1] 530 nm Δλ 35 nm Dominant Wavelength IF=350mA [Typ.] Spectral bandwidth at 50%ΦREL MAX IF=350mA [Typ.] Forward Voltage IF=350mA [Min.] Forward Voltage IF=350mA [Typ.] Forward Voltage 2.7 VF [2] 3.3 IF=350mA [Max.] V 3.8 Temperature coefficient of λpeak IF=350mA, -10°C≤ T≤100°C [Typ.] TCλpeak 0.16 nm/ °C Temperature coefficient of λdom IF=350mA, -10°C≤ T≤100°C [Typ.] TCλdom 0.14 nm/ °C Temperature coefficient of VF IF=350mA, -10°C≤ T≤100°C [Typ.] TCV -2.26 mV/ °C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 3 OF 6 ERP: 1201003391 AA1010ZG10ZC SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 4 OF 6 ERP: 1201003391 AA1010ZG10ZC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 5 OF 6 ERP: 1201003391 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu AA1010ZG10ZC DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 6 OF 6 ERP: 1201003391