3.5x2.8 mm SMD CHIP LED LAMP Part Number: AA3529ZG24ZS PRELIMINARY SPEC GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z SINGLE COLOR. The Green source color devices are made with InGaAlN z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Vertical Light Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. z AVAILABLE ON TAPE AND REEL. It is recommended to use a wrist band or anti-electrostatic z IDEAL FOR BACKLIGHTING. glove when handling the LEDs. z WHITE SMD PACKAGE, SILICONE RESIN. All devices, equipment and machinery must be electrically z LOW THERMAL RESISTANCE. grounded. z PACKAGE: 1500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH9588 REV NO: V.1 DATE: DEC/06/2007 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003020 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAH9588 REV NO: V.1 DATE: DEC/06/2007 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003020 Selection Guide Dice Part No. AA3529ZG24ZS GREEN (InGaAlN) Iv (mcd) [2] @ 150mA Lens Type WATER CLEAR Φv (mlm) [2] @ 150mA Viewing Angle [1] Min. Typ. Min. Typ. 2 θ 1/2 6700 7500 18000 21000 120 ° Notes: 1. θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λ peak Peak Wavelength Green λ D [1] Dominant Wavelength Δλ 1/2 Max. Units Test Conditions 515 nm IF=150mA Green 525 nm IF=150mA Spectral Line Half-width Green 30 nm IF=150mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.4 V IF=150mA 3.8 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 570 mW DC Forward Current 150 mA Thermal Resistance 170 °C/W Operating/Storage Temperature -40°C To +85°C SPEC NO: DSAH9588 REV NO: V.1 DATE: DEC/06/2007 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003020 GREEN AA3529ZG24ZS SPEC NO: DSAH9588 REV NO: V.1 DATE: DEC/06/2007 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003020 AA3529ZG24ZS Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH9588 REV NO: V.1 DATE: DEC/06/2007 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003020 PACKING & LABEL SPECIFICATIONS AA3529ZG24ZS SPEC NO: DSAH9588 REV NO: V.1 DATE: DEC/06/2007 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003020