3.5x2.8 mm SMD CHIP LED LAMP AA3528SECK SUPER BRIGHT ORANGE Description Features The Super Bright Orange source color devices are SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER made with DH InGaAlP on GaAs substrate Light Emitting Diode. PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ±0. 25 (0. 0 1" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. SPEC NO: DSAD1230 REV NO: V.4 DATE: MAR/21/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1201000361 Selection Guide Part No. Dice AA3528SECK Iv (mcd) @ 20 mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 70 300 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Orange λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1230 REV NO: V.4 DATE: MAR/21/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1201000361 Super Bright Orange AA3528SECK SPEC NO: DSAD1230 REV NO: V.4 DATE: MAR/21/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1201000361 AA3528SECK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. D i g i t a l l y s i g n e d b y N I N G T I N G c n = N I N G T I N G , o = N I N G T I N G , c = C N D a t e : 2 0 0 5 . 0 3 . 2 2 1 4 : 3 2 : 3 6 + 0 8 '0 0 'R e a s o n : < n o n e > SPEC NO: DSAD1230 REV NO: V.4 DATE: MAR/21/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1201000361