3.2x2.4mm RIGHT ANGLE SMD CHIP LED LAMP APEKA3224SEC SUPER BRIGHT ORANGE Description Features 3.2mmx2.4mm RIGHT ANGLE SMT LED, 2.4mm The Super Bright Orange device is made with DH THICKNESS. InGaAlP (on GaAs substrate) light emitting diode chip. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1156 REV NO: V.3 DATE: JUL/02/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000448 Selection Guide Part No. Dice APEKA3224SEC Iv (mcd) @ 20mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 110 300 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Orange λD Dominant Wavelength ∆λ1/2 C Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Power dissipation Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1156 REV NO: V.3 DATE: JUL/02/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000448 Super Bright Orange APEKA3224SEC SPEC NO: DSAD1156 REV NO: V.3 DATE: JUL/02/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000448 APEKA3224SEC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1156 REV NO: V.3 DATE: JUL/02/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000448 PACKING & LABEL SPECIFICATIONS APEKA3224SEC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1156 REV NO: V.3 DATE: JUL/02/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000448