5.0X6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA5060SYC/J Features Description z SINGLE The Super Bright device is based on a light emitting diode COLOR. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER SUPER BRIGHT YELLOW chip made from AlGaInP and bonded on silicon substrate. PROCESS. z AVAILABLE z IDEAL FOR BACKLIGHTING. z PACKAGE zMOISTURE zRoHS ON TAPE AND REEL. : 500PCS / REEL. SENSITIVITY LEVEL : LEVEL 4. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG3567 REV NO: V.2 DATE: JUN/19/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201002218 Selection Guide Dice Part No. AA5060SYC/J Iv (mcd) [2] @ 30 mA Lens Type SUPER BRIGHT YELLOW (AlGaInP) Viewing Angle [1] Min. Typ. 2θ1/2 380 800 100° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 589 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.3 2.8 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units 140 mW DC Forward Current 50 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG3567 REV NO: V.2 DATE: JUN/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201002218 Super Bright Yellow AA5060SYC/J SPEC NO: DSAG3567 REV NO: V.2 DATE: JUN/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201002218 AA5060SYC/J Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG3567 REV NO: V.2 DATE: JUN/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201002218 PACKING & LABEL SPECIFICATIONS AA5060SYC/J SPEC NO: DSAG3567 REV NO: V.2 DATE: JUN/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201002218