5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APTKA5614SYCK PRELIMINARY SPEC Super Bright Yellow Features Description z 5.6mmX1.4mm RIGHT ANGLE SMT LED, 1.0mm The Super Bright Yellow device is made with InGaAlP (on THICKNESS. GaAs substrate) light emitting diode chip. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z PACKAGE: 2000PCS / REEL . z lRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7936 REV NO: V.1 DATE: SEP/27/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1204000342 Selection Guide Part No. Dice APTKA5614SYCK Iv (mcd) [2] @ 20mA Lens Type Super Bright Yellow (InGaAlP) Viewing Angle [1] Min. Typ. 2θ1/2 50 100 90° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH7936 REV NO: V.1 DATE: SEP/27/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1204000342 Super Bright Yellow APTKA5614SYCK SPEC NO: DSAH7936 REV NO: V.1 DATE: SEP/27/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1204000342 APTKA5614SYCK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH7936 REV NO: V.1 DATE: SEP/27/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1204000342 PACKING & LABEL SPECIFICATIONS APTKA5614SYCK SPEC NO: DSAH7936 REV NO: V.1 DATE: SEP/27/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1204000342