1.6X0.8mm SMD CHIP LED LAMP Part Number: AP1608SYC Super Bright Yellow Features Description z 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. The Super Bright Yellow device is made with InGaAlP (on z LOW POWER CONSUMPTION. GaAs substrate) light emitting diode chip. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE: 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0921 REV NO: V.6 DATE: SEP/08/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1203000078 Selection Guide Part No. Dice AP1608SYC Iv (mcd) [2] @ 20mA Lens Type Super Bright Yellow (InGaAlP) Viewing Angle [1] Min. Typ. 2θ1/2 50 150 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 588 nm IF=20mA Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0921 REV NO: V.6 DATE: SEP/08/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1203000078 Super Bright Yellow AP1608SYC SPEC NO: DSAD0921 REV NO: V.6 DATE: SEP/08/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1203000078 AP1608SYC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD0921 REV NO: V.6 DATE: SEP/08/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1203000078 PACKING & LABEL SPECIFICATIONS AP1608SYC SPEC NO: DSAD0921 REV NO: V.6 DATE: SEP/08/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1203000078