1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608SECK SUPER BRIGHT ORANGE Description Features 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. The Super Bright Orange device is made with DH LOW POWER CONSUMPTION. InGaAlP (on GaAs substrate) light emitting diode chip. W IDE VIEW ING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0928 REV NO: V.6 DATE: DEC/19/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP:1203005436 Selection Guide Dice Part No. APT1608SECK Iv (mcd) [2] @ 20mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 50 160 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Orange λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0928 REV NO: V.6 DATE: DEC/19/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP:1203005436 Super Bright Orange APT1608SECK SPEC NO: DSAD0928 REV NO: V.6 DATE: DEC/19/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP:1203005436 APT1608SECK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD0928 REV NO: V.6 DATE: DEC/19/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP:1203005436 PACKING & LABEL SPECIFICATIONS APT1608SECK SPEC NO: DSAD0928 REV NO: V.6 DATE: DEC/19/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP:1203005436