KINGBRIGHT APT3216SEC

3.2mmx1.6mm SMD CHIP LED LAMP
APT3216SEC
Features
SUPER BRIGHT ORANGE
Description
3.2mmx1.6mm SMT LED, 0.75mm THICKNESS.
The Super Bright Orange device is made with DH
LOW POWER CONSUMPTION.
InGaAlP (on GaAs substrate) light emitting diode chip.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD0990
REV NO: V.3
DATE: FEB/28/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1203001962
Selection Guide
Part No.
Dice
APT3216SEC
Iv (mcd)
@ 20mA
Lens Type
SUPER BRIGHT ORANGE (InGaAlP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2 θ 1/2
70
200
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Orange
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
610
nm
IF=20mA
Super Bright Orange
601
nm
IF=20mA
Spectral Line Half-width
Super Bright Orange
29
nm
IF=20mA
C
Capacitance
Super Bright Orange
30
pF
VF=0V;f=1MHz
VF
Forward Voltage
Super Bright Orange
2.0
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Orange
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Orange
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
195
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0990
REV NO: V.3
DATE: FEB/28/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1203001962
Super Bright Orange
APT3216SEC
SPEC NO: DSAD0990
REV NO: V.3
DATE: FEB/28/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1203001962
APT3216SEC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: DSAD0990
REV NO: V.3
DATE: FEB/28/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1203001962