2.1x0.6mm RIGHT ANGLE SURFACE LED LAMP Part Number: APA2106SYCK Super Bright Yellow Features Description z 2.1mmX0.6mm RIGHT ANGLE SMT LED, 1.0mm The Super Bright Yellow device is made with DH InGaAlP THICKNESS. (on GaAs substrate) light emitting diode chip. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE: 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications SPEC NO: DSAA5606 REV NO: V.10 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203000537 Selection Guide Part No. Dice APA2106SYCK Iv (mcd) [2] @ 20mA Lens Type Super Bright Yellow (InGaAlP) Viewing Angle [1] Min. Typ. 2θ1/2 50 150 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA5606 REV NO: V.10 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203000537 Super Bright Yellow APA2106SYCK SPEC NO: DSAA5606 REV NO: V.10 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203000537 APA2106SYCK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAA5606 REV NO: V.10 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203000537 PACKING & LABEL SPECIFICATIONS APA2106SYCK SPEC NO: DSAA5606 REV NO: V.10 DATE: MAY/18/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203000537