1.6x1.5mm BI-COLOR SMD CHIP LED LAMP APTB1615ESGC HIGH EFFICIENCY RED/ SUPER BRIGHT GREEN Features Description !1.6mmx1.5mm SMT LED, 0.7mm THICKNESS. The High Efficiency Red source color devices are made with !BI Gallium Arsenide Phosphide on Gallium Phosphide Orange -COLOR,LOW POWER CONSUMPTION. !WIDE VIEWING ANGLE. Light Emitting Diode. !IDEAL FOR BACKLIGHT AND INDICATOR. The Super Bright Green source color devices are made with !VARIOUS COLORS AND LENS TYPES AVAILABLE. Gallium Phosphide Green Light Emitting Diode. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0373 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN: Y.F.XU PAGE: 1 OF 4 Selection Guide Par t No . Dic e HIGH EFFICIENCY RED (GaAsP/GaP) APTB1615ESGC Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT GREEN (GaP) V i ew i n g An g l e Min . Ty p . 5 12 3 12 WATER CLEAR 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength High Efficiency Red Super Bright Green λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA High Efficiency Red Spectral Line Halfwidth Super Bright Green 45 30 nm IF=20mA pF VF=0V;f=1MHz 2.5 2.5 V IF=20mA 10 uA V R = 5V C Capacitance High Efficiency Red Super Bright Green 15 15 VF Forward Voltage High Efficiency Red Super Bright Green 2.0 2.2 IR Reverse Current All Max . Absolute Maximum Ratings at T)=25°°C P ar am e t e r H i g h E f f i c i en c y R ed Su p er B r ig h t Gr een Un it s Power dissipation 105 10 5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0373 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN: Y.F.XU PAGE: 2 OF 4 High Efficiency Red / Super Bright Green APTB1615ESGC SPEC NO: CDA0373 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN: Y.F.XU PAGE: 3 OF 4 APTB1615ESGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process." Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0373 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN: Y.F.XU PAGE: 4 OF 4