SOT-23 SURFACE MOUNT LED LAMP KM-23ESGW Features zSOT-23 zLOW Description PACKAGE SURFACE MOUNT LED LAMP. POWER CONSUMPTION. zLONG zRoHS The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide LIFE - SOLID STATE RELIABILITY. zPACKAGE: HIGH EFFICIENCY RED SUPER BRIGHT GREEN 2000PCS / REEL. Orange Light Emitting Diode. The Super Bright Green source color devices are made COMPLIANT. with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAA6439 REV NO: V.8 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 1 OF 5 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) KM-23ESGW Min. Typ. 4 15 4 15 WHITE DIFFUSED SUPER BRIGHT GREEN (GaP) Viewing Angle 2 θ 1/2 140° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength High Efficiency Red Super Bright Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Super Bright Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA6439 REV NO: V.8 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 2 OF 5 KM-23ESGW High Efficiency Red SPEC NO: DSAA6439 REV NO: V.8 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 3 OF 5 Super Bright Green SPEC NO: DSAA6439 REV NO: V.8 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 4 OF 5 KM-23ESGW Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA6439 REV NO: V.8 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 5 OF 5