2.0x1.25mm SMD CHIP LED LAMP Part Number: APHBM2012ETSGTC PRELIMINARY SPEC High Efficiency Red Super Bright Green Features Description z 2.0mmx1.25mm SMT LED, 0.45mm MAX. THICKNESS. The High Efficiency Red source color devices are made with z BI -COLOR, LOW POWER CONSUMPTION. Gallium Arsenide Phosphide on Gallium Phosphide Orange z WIDE VIEWING ANGLE. Light Emitting Diode. z IDEAL FOR BACKLIGHT AND INDICATOR. The Super Bright Green source color devices are made with z PACKAGE : 2000PCS / REEL. Gallium Phosphide Green Light Emitting Diode. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG7625 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/15/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203005981 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 4 17 7 20 High Efficiency Red (GaAsP/GaP) APHBM2012ETSGTC Viewing Angle [1] 2θ1/2 120° WATER CLEAR Super Bright Green (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Super Bright Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG7625 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/15/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203005981 APHBM2012ETSGTC High Efficiency Red SPEC NO: DSAG7625 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/15/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203005981 Super Bright Green SPEC NO: DSAG7625 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/15/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203005981 APHBM2012ETSGTC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications SPEC NO: DSAG7625 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/15/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203005981 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG7625 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu APHBM2012ETSGTC DATE: MAY/15/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203005981