10mm BAYONET BASED LED LAMP BLB102SURC/E-6V HYPER RED Features Description APPLICATION OF DIFFERENT ACROSS CURRENT. with DH InGaAlP on GaAs substrate Light Emitting l BUILT-IN l LONG l LOW l LOW LIFE. CURRENT, POWER SAVINGS. The Hyper Red source color devices are made Diode. MAINTENANCE. l SOLID l 6V CURRENT LIMITING RESISTOR FOR DIRECT STATE, HIGH VIBRATION RESISTANT. INTERNAL RESISTOR. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB3311 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE:APR/08/2003 DRAWN: D.H.FANG PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e BLB102SURC /E-6V HYPER RED (InGaAIP) L en s Ty p e WATER C LEAR Iv (m c d ) V=6V Mi n . 900 Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Ty p . 2200 V i ew i n g An g le 2θ1/2 40° Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er λp e a k Peak Wavelength Hyper Red λD D omi nate Wavelength ∆λ1/2 D ev i c e Ty p . Max . Un its Tes t C o n d i t i o n s 640 nm VF =6V Hyper Red 630 nm VF =6V Spectral Li ne Half-wi dth Hyper Red 25 nm VF =6V IF Forward C urrent Hyper Red 30 mA VF =6V C C apaci tance Hyper Red 45 pF VF =0V, f=1MHZ IR Reverse C urrent Hyper Red uA VR =5V 10 Absolute Maximum Ratings at TA=25°°C P ar am et er Power di ssi pati on D C Forward Voltage Un its 180 mW 5 V 7 Reverse Voltage Operati ng Temperature V -40 To +70 Storage Temperature SPEC NO: DSAB3311 APPROVED: J. Lu H y p er R ed -40 To +85 REV NO: V.2 CHECKED: Allen Liu DATE:APR/08/2003 DRAWN: D.H.FANG °C °C PAGE: 2 OF 3 Hyper Red SPEC NO: DSAB3311 APPROVED: J. Lu BLB102SURC/E-6V REV NO: V.2 CHECKED: Allen Liu DATE:APR/08/2003 DRAWN: D.H.FANG PAGE: 3 OF 3