6mm FLANGE BASED LED LAMP BLFA064SURCK28V HYPER RED Features Description !BUILT-IN The Hyper Red source color devices are made with CURRENT LIMITING RESISTOR FOR DIRECT APPLICATION OF DIFFERENT ACROSS DH InGaAlP on GaAs substrate Light Emitting Diode. CURRENT. ! LONG LIFE. ! LOW CURRENT, POWER SAVINGS. ! LOW MAINTENANCE. ! DIFFERENT ! SOLID ! 28V COLOR AVAILABLE. STATE, HIGH VIBRATION RESISTANT. INTERNAL RESISTOR. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1602 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE: APR/08/2003 DRAWN: F.Y.YUAN PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e BLFA064SURCK28V Iv (m c d ) V=28V L en s Ty p e HYPER RED ( InGaAlP ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ 1 / 2 650 1100 110° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er D ev i c e λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un its Tes t Co n d it io n s 650 nm V F=2 8 V Hyper Red 635 nm V F=2 8 V Spectral Line Half-width Hyper Red 28 nm V F=2 8 V C Capacitance Hyper Red 35 pF V F = 0 V;f= 1 M Hz IF Forward Current Hyper Red 10 mA V F=2 8 V IR Reverse Current Hyper Red uA VR = 5V 10 Absolute Maximum Ratings at TA=25°°C P ar am et er H y p er R ed Un its Power dissipation 300 mW Forward Voltage 30 V Reverse Voltage 5 V Operating Temperature -40 °C To +70 °C Storage Temperature -40 °C To + 85 °C SPEC NO: DSAD1602 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE: APR/08/2003 DRAWN: F.Y.YUAN PAGE: 2 OF 3 Hyper Red BLFA064SURCK28V SPEC NO: DSAD1602 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE: APR/08/2003 DRAWN: F.Y.YUAN PAGE: 3 OF 3