10mm SCREW BASED LED LAMP BLS101SURC/E28V HYPER RED Features Description !BUILT-IN CURRENT LIMITING RESISTOR FOR DIRECT The Hyper Red source color devices are made APPLICATION OF DIFFERENT ACROSS CURRENT. with DH InGaAlP on GaAs substrate Light !LONG LIFE. Emitting Diode. !LOW CURRENT, POWER SAVINGS. . !LOW MAINTENANCE. !DIFFERENT COLOR AVAILABLE. !SOLID STATE, HIGH VIBRATION RESISTANT. !28V INTERNAL RESISTOR. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAB2237 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE: APR/14/2003 DRAWN: S.J.HOU PAGE: 1 OF 3 Selection Guide Par t No . Dic e BLS101SURC/E28V Iv (m c d ) V=28V L en s Ty p e HYPER RED (InGaAlP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 48 0 90 0 20 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 640 nm V=28V Hyper Red 6 30 nm V=28V Spectral Line Half-width Hyper Red 25 nm V=28V IF Forward Current Hyper Red 10.6 mA VF=28V IR Reverse Current Hyper Red uA V R = 5V 10 Absolute Maximum Ratings at T)=25°°C Par am et er H y p e r R ed Un it s Power dissipation for 28V 350 mW DC Forward Voltage for 28V 32 V Reverse Voltage 5 V Operating Temperature -40°C To +70°C Storage Temperature -40°C To +85°C SPEC NO:DSAB2237 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE: APR/14/2003 DRAWN: S.J.HOU PAGE: 2 OF 3 Hyper Red SPEC NO:DSAB2237 APPROVED: J.LU BLS101SURC/E28V REV NO: V.2 CHECKED: Allen Liu DATE: APR/14/2003 DRAWN: S.J.HOU PAGE: 3 OF 3