5mm FLANGE BASED LED LAMP BLF052SURC/E-6V HYPER RED Features Description !BUILT-IN CURRENT LIMITING RESISTOR FOR DIRECT The Hyper Red source color devices are made with DH APPLICATION OF DIFFERENT ACROSS CURRENT. InGaAlP on GaAs substrate Light Emitting Diode. !LONG LIFE. ! LOW CURRENT, POWER SAVINGS. !LOW MAINTENANCE. ! DIFFERENT COLOR AVAILABLE. ! SOLID STATE, HIGH VIBRATION RESISTANT. !6V INTERNAL RESISTOR. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAB3302 APPROVED: J.LU REV NO: V.2 CHECKED:Allen Liu DATE:APR/13/2003 DRAWN:D.L.HUANG PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e BLF052SURC/E-6V Iv (m c d ) V=6V L en s Ty p e Hyper Red(InGaAIP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ 1/2 900 1200 45° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er D ev i c e Ty p . Max . Un its Tes t Co n d it io n s λ peak Peak Wavelength Hyper Red 640 - nm VF=6V λD Wavelength at Dominate Hyper Red 630 - nm VF=6V ∆λ1/2 Spectral Line Half-width Hyper Red 25 - nm VF=6V IF Forward Current Hyper Red 23 - mA VF=6V IR Reverse Current Hyper Red - 10 uA V R = 5V Absolute Maximum Ratings at TA=25°°C P ar am et er H y p er R ed Un its 180 mW Forward Voltage 7 V Reverse Voltage 5 V Power dissipation Operating Temperature -40°C To +70°C Storage Temperature -40°C To +85°C SPEC NO:DSAB3302 APPROVED: J.LU REV NO: V.2 CHECKED:Allen Liu DATE:APR/13/2003 DRAWN:D.L.HUANG PAGE: 2 OF 3 Hyper Red SPEC NO:DSAB3302 APPROVED: J.LU BLF052SURC/E-6V REV NO: V.2 CHECKED:Allen Liu DATE:APR/13/2003 DRAWN:D.L.HUANG PAGE: 3 OF 3