6.8mmx19.9mm LIGHT BAR Part Number: DF3ID Features High Efficiency Red Description UNIFORM LIGHT EMITTING AREA. The High Efficiency Red source color devices are made with EASILY MOUNTED ON P.C. BOARDS OR Gallium Arsenide Phosphide on Gallium Phosphide Orange NDUSTRY STANDARD SOCKETS. Light Emitting Diode. FLUSH MOUNTABLE. EXCELLENT ON/OFF CONTRAST. CAN BE USED WITH PANELS AND LEGEND MOUNTS. MECHANICALLY RUGGED. I.C. COMPATIBLE. RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram 1.All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2.Specifications are subject to change without notice. SPEC NO: DSAD1416 REV NO: V.6 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1334000050 Selection Guide Part No. Dice DF3ID Iv (mcd) [1] @ 10mA Lens Type High Efficiency Red (GaAsP/GaP) WHITE DIFFUSED Min. Typ. 8 31 Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD1416 REV NO: V.6 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1334000050 High Efficiency Red DF3ID SPEC NO: DSAD1416 REV NO: V.6 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1334000050 PACKING & LABEL SPECIFICATIONS DF3ID SPEC NO: DSAD1416 REV NO: V.6 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1334000050