8.89mmx3.81mm LED LIGHT BAR Part Number: KB2620EW High Efficiency Red Features Description z Uniform light emitting area. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Easily mounted on P.C. boards. Light Emitting Diode. z Flush mountable. z Excellent on/off contrast. z Can be used with panels and legend mounts. z Categorized for color. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD1458 REV NO: V.6 DATE: MAR/24/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000127 Selection Guide Part No. Dice KB2620EW Iv (mcd) [1] @ 20mA Lens Type High Efficiency Red (GaAsP/GaP) White Diffused Min. Typ. 12 27 Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD1458 REV NO: V.6 DATE: MAR/24/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000127 High Efficiency Red KB2620EW SPEC NO: DSAD1458 REV NO: V.6 DATE: MAR/24/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000127 PACKING & LABEL SPECIFICATIONS KB2620EW SPEC NO: DSAD1458 REV NO: V.6 DATE: MAR/24/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000127 SPEC NO: DSAD1458 REV NO: V.6 DATE: MAR/24/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000127 SPEC NO: DSAD1458 REV NO: V.6 DATE: MAR/24/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000127