KINGBRIGHT WP7113VGC-Z

T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: WP7113VGC/Z
PRELIMINARY SPEC
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z LOW POWER CONSUMPTION.
The Green source color devices are made with InGaN Light
z POPULAR T-1 3/4 DIAMETER PACKAGE.
Emitting Diode.
z GENERAL PURPOSE LEADS.
Static electricity and surge damage the LEDS.
z RELIABLE AND RUGGED.
It is recommended to use a wrist band or anti-electrostatic
z LONG LIFE - SOLID STATE RELIABILITY.
glove when handling the LEDs.
z AVAILABLE ON TAPE AND REEL.
All devices, equipment and machinery must be electrically
z RoHS COMPLIANT.
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAG9843
REV NO: V.2
DATE: MAY/10/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 6
ERP: 1101019884
Selection Guide
Part No.
Dice
WP7113VGC/Z
Lens Type
Green (InGaN)
WATER CLEAR
Viewing
Angle [1]
Iv (mcd) [2]
@ 20mA
Min.
Typ.
2θ1/2
10000
22000
20°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
525
nm
IF=20mA
Green
535
nm
IF=20mA
Spectral Line Half-width
Green
39
nm
IF=20mA
C
Capacitance
Green
65
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.2
3.7
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
111
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAG9843
REV NO: V.2
DATE: MAY/10/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 6
ERP: 1101019884
Green
WP7113VGC/Z
SPEC NO: DSAG9843
REV NO: V.2
DATE: MAY/10/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 6
ERP: 1101019884
PACKING & LABEL SPECIFICATIONS
WP7113VGC/Z
SPEC NO: DSAG9843
REV NO: V.2
DATE: MAY/10/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 6
ERP: 1101019884
SPEC NO: DSAG9843
REV NO: V.2
DATE: MAY/10/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 6
ERP: 1101019884
SPEC NO: DSAG9843
REV NO: V.2
DATE: MAY/10/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 6 OF 6
ERP: 1101019884